Termékek élelmiszerek és (98)

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

Brote und Brötchen vom Spezialisten Diversi Foods

ViscoTec Dispenser 3VMP36 is a volumetric dosing pump of larger volumes for an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - Drive with spur gear motor and optional forced cooling fan - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation

The ViscoTec dosing and filling pump RD-Hygiene for food and cosmetics is a volumetric pump based on the continuous piston principle. It is ideally suited for discontinuous or continuous pulsation-free dosing of viscous, structure-sensitive and solids-laden media. Thanks to the high-quality ViscoTec dispensers, high-precision dosing applications can be realized in the food and cosmetics sector. The systems are used e.g. in the bakery and confectionery sector for decoration. Typical doses are icing or fondant, but also fillings such as vanilla or chocolate cream. Your advantages: - Specially adapted filling tubes for a wide variety of filling applications - Application and dosing in automated systems - Low to high viscosity as well as abrasive, shear-sensitive or lumpy media - hot and cold filling - Optimum results for CIP/SIP (Cleaning in Place/Sterilisation in Place) cleaning

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

I separatori a ugelli Flottweg (bifase o trifase) sono utilizzati per la separazione continua dei solidi dai liquidi e garantiscono la massima efficacia del processo di chiarificazione o separazione. Il prodotto da chiarificare o separare fluisce all'interno del tamburo attraverso un tubo di alimentazione fisso e viene gradualmente accelerato dal ripartitore fino alla velocità di esercizio. Caratteristiche dei nostri separatori a ugelli: — Design del tamburo ottimizzato dal punto di vista energetico e resistente all'usura — Alte prestazioni — Manutenzione semplice e rapida — Progettato per un'igiene perfetta I separatori a ugelli Flottweg sono disponibili in due modelli base: — Chiarificatore/separatore a ugelli bifase — Concentratore/separatore a ugelli trifase

Les séparateurs à buses Flottweg (séparateurs à buses 2 ou 3 phases) sont utilisés pour la séparation solide/liquide en flux continu et garantissent une clarification ou une séparation très efficace. Le produit à clarifier (ou à séparer) est injecté à l'intérieur du bol via une canne d’alimentation fixe. Il subit une accélération progressive au travers du distributeur jusqu'à atteindre sa vitesse de rotation. Caractéristiques de nos séparateurs à buses: — Conception de bol optimisée pour une demande énergétique faible et une usure réduite — Hautes performances — Maintenance simple et rapide — Conception hygiénique optimale Les séparateurs à buses Flottweg sont disponibles en deux conceptions: — Clarificateur/séparateur à buses pour séparation 2 phases — Concentrateur/Séparateur à buses 3 phases

The SLX series is derived from the SL series and has been especially for use in applications in the pharmaceutical, medical and food industries. To reduce machine downtimes, CIP and SIP ("cleaning in place", "sterilization in place") cleaning and sterilization processes are state of the art today. For this purpose, the machine interior is cleaned thermally and/or chemically with high temperature, pressure and aggressive media. The devices of the SLX series are perfectly equipped for use in this area and guarantee maximum reliability and service life thanks to their extremely robust design, a completely sealed stainless steel housing and high media and temperature resistance. KeyFeatures ■ Measuring ranges 10...300 mm ■ Linearity up to ±0.10 % of measuring range ■ High protection class IP68/IP69K ■ Operating temperature sensor up to 200 °C ■ High resistance to aggressive media ■ Customized designs

The dispenser based on the ViscoTec endless piston principle is particularly suitable for the filling, dosing or application of viscous, abrasive, highly filled or shear-sensitive materials. There are three different versions of the volumetric dosing system: 3VHD8, 3VHD12 and 2VHD12. Important key data: - Withdrawal option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection - quick and easy disassembly/assembly - Sealless, easily dismountable rotor string - process-safe and high-precision filling/dosing - variable quantities infinitely adjustable - compact construction Hygienic features: - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Interior with optimised dead space - all surfaces Ra ≤ 0.8 μm - rinsing connection for automatic cleaning

High-End Tunneldetektor mit integrierter Auswerteelektronik zum Einbau in Förderbänder Metalldetektoren des Typs METRON 07 CI werden in vielfältigen Anwendungen eingesetzt. Sie stellen die hochwertigste Option zur reinen Metallsuche im Portfolio unserer Tunneldetektoren dar. Sie können in Förderbänder, aber auch in Produktrutschen installiert werden. Die verfügbaren Dimensionen eignen sich sowohl für die Untersuchung von kleinen wie auch großen Produkten. Der kompakte Aufbau kommt ohne zusätzlichen Steuerschrank aus.

Fahrbarer Metalldetektor zum Anschluss an einen Vakuumfüller inklusive Ausscheidemechanik Metalllseparatoren der Serien MEATLINE 07 O werden an den Ausgang von Vakuumfüllern in der Wurstproduktion angeschlossen. Mechanische Anschlüsse für alle gängigen Wurst- und Schinkenfüller sind verfügbar, ebenso wie elektronische Steuerungadapter zum Signalaustausch zwischen Füller, Metalldetektor und Folgeanlagen wie Abdreher oder Klipper.

High-End Metallseparator zur Untersuchung von Schüttgütern im freien Fall Metallseparatoren des Typs QUICKTRON 07 RH werden zur Untersuchung von Pulvern und Granulaten in Freifallleitungen eingesetzt. Sie sind in Nennweiten bis 300 mm verfügbar und können damit alle Einsatzbereiche, vom Labor bis zur LKW-Beladung abdecken. Ihr hygienischer Aufbau und die leichte Reinigbarkeit verhindert Querkontamination zwischen Produktchargen. Sie können je nach Anforderung die Prozesssicherheit erhöhen oder auch die Aufgabe der Warenausgangskontrolle erfüllen.

Polyoxymethylen (POM) ist ein teilkristalliner, thermoplastischer Kunststoff, der sich auszeichnet durch hohe Festigkeit und Steifigkeit. Hergestellt wird POM durch Kettencopolymerisation.

Lubrication of rolling and friction bearings, joints, linear drives, guides For the lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Advantages and benefits NSF H1 registered Can be used universally due to good high-temperature properties, long-term lubricating effect and good adhesive strength on metal surfaces Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents High resistance to oxidation and ageing Operating temperature:-35 °C → +120 °C (briefly +160 °C) NLGI grade:1 Base oil viscosity (40 °C):360 mm²/s DN-factor (dm x n):500,000 mm/min

Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Operating temperature:-40 °C → +80 °C Density (20 °C):0.81 g/ml Viscosity (40 °C):> 21.5 mm²/s Salt spray test:> 100 h

Rolling and friction bearing lubrication, even at high temperatures Lubrication for bearings with contact to cleaning agents or disinfectants For mechanical units such as levers, joints and hinges, also under strong water effect Advantages and benefits NSF H1 registered (OKS 480 & OKS 481) High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations Excellent wear protection and very good high-pressure properties The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection Broad temperature application range (-30°C to +160°C) High temperature and oxidation stability through fully synthetic base oil Very high resistance to water-alkaline or acidic disinfectants and cleaning agents MOSH/MOAH-free Operating temperature:-30 °C → 160 °C NLGI grade:2 DN factor (dm x n):400,000 mm/min Base oil viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):4,000 N

Multipurpose oil for bearing, lever and joint lubrication Hydraulic oil for use in all areas in which physiologically harmless are required Compressor oil for piston compressors for prescribed oil ISO VG 100 Advantages and benefits NSF H1 registered Long economic operating times thanks to optimal additives against oxidation and ageing Good cold behaviour Resistant to cold and hot water, steam as well as disinfectants and cleaning agents For universal use due to long-term lubrication and high adhesive strength Good wear protection Tasteless and odourless Conforms to VDL requirements Operating temperature:-35 °C → +135 °C Density (20 °C):0.84 g/ml Viscosity (40 °C):100 mm²/s

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, fittings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good oxidation and ageing stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):460 mm²/s FZG damage level:power level > 12

Lubrication of closed toothed gearin Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1-registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):220 mm²/s FZG damage level:power level > 12

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-45 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):32 mm²/s

Sealing lubrication of sliding surfaces, e.g. ground-in parts such as taper plugs, dosing plungers, valves, beer taps etc. Maintenance lubrication of plastic and rubber parts, as well as stuffing boxes, lip seals and O-rings Rolling and friction bearing lubrication in slow-running areas, toothing or chains on filling and packaging machines, stirring and grinding mechanisms etc. Advantages and benefits Highly effective due to proven lubricant formula Fulfils most demanding hygienic requirements. Reduced maintenance and lubricant costs due to possible long-term lubrication Resistant to hot and cold water, water vapour, wateryalkaline and acidic disinfectants and cleaning agents Neither hard residues result, nor is there a tendency to soften or drip due to pasteurisation or sterilization Odour and taste-free, and does not affect the properties of beer foam Toxicologically harmless as defined in German LFGB Operating temperature:-10 °C → +140 °C NLGI grade:3 Base oil viscosity (40 °C):1,600 mm²/s

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection Also available as spray version OKS 3571 MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0.87 g/ml Viscosity (40 °C):300 mm²/s

Grease lubrication of friction and rolling bearings at low operating temperatures Grease lubrication of friction and rolling bearings at high speeds Grease lubrication of bearings with low coasting moments or low bearing play Advantages and benefits NSF H1 registered Low-viscosity, fully synthetic base oil ensures the functionality of the lubricating film up to -70°C Very good conveying capability in central lubricating systems also at low temperatures Clean the surfaces for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing Operating temperature:-45 °C → +120 °C NLGI grade:1 DN factor (dm x n):800,000 mm/min Base oil viscosity (40 °C):30 mm²/s

Grease lubrication of rolling and friction bearings, joints, linear drives and chains Lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Lubrication of fittings or machines in dairies, breweries, bakeries, slaughterhouses, etc. Advantages and benefits NSF H1 registered Reduces wear Excellent resistance to oxidation and ageing Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents Operating temperature:-30 °C → +110 °C NLGI grade:2 DN factor (dm x n):400,000 mm/min Base oil viscosity (40 °C):240 mm²/s Four-ball test rig (welding load):2,200 N

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0,87 g/ml Viscosity (40 °C):300 mm²/s

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water OKS 370 is suitable for use with the OKS Airspray system Also available as spray version OKS 371 Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants. Operating temperature:-10 °C → +180 °C Density (20 °C):0.88 g/ml Viscosity (40 °C):14 mm²/s

For closed gear units and geared motors, plain and friction bearings even at higher rotating speeds, e.g. on filling and packaging machines For joints, propeller shafts and chains when grease lubrication is specified Advantages and benefits Toxicologically harmless as defined in German LFGB Formula in accordance the FDA guideline 21 CFR 178.3570 NSF H1 registered Long operating times due to good resistance to oxidation and ageing Reduced wear due to highly adhesive, load-bearing lubricating film Excellent corrosion protection Low dynamic viscosity enables use with minimal bearing play and gear unit spaces Good pumpability with central lubricating systems Very high resistance to hot and cold water, watery-alkaline and acidic disinfectants and cleaning agents Operating temperature:-45 °C → +120 °C NLGI grade:0-00 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):160 mm²/s

Lubrication of all kind of high stressed sliding areas, especially at low sliding speeds or oscillating movements, e.g. at threads, joints and bayonet nut connectors made of steel or non ferrous metals Assembling paste with corrosion protection for screws, bolts, spikes, bushings, flanges, spindles and fittings in the whole food stuff industry Separation of high temperature stressed screw joints, even after a long operation time Advantages and benefits Adheres good on metal surfaces, has a good water resistance and corrosion protection Good water resistance Prevents from tribo-corrosion Contains no metal pigments and is free of sulphurous materials Neutral to alloyed steels Formulation according to the FDA guideline 21CFR 178.3570 Registered by the NSF H1 MOSH/MOAH-free For optimal adhesion clean thread and sliding areas from dirt and other lubricants, first mechanically (e.g. with wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner. Apply paste evenly in a sufficient amount Operating temperature:-30 °C → +160 °C/+1,200 °C (lubrication/separation) Press-fit:µ = 0.12 Thread friction (M10/8,8):µ total = 0.15

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.85 g/ml Viscosity (40 °C):320 mm²/s FZG damage level:power level > 12

Transglutaminase, Lebensmittelzusatzstoffe sowie Hilfsstoffe Transglutaminase, auch allgemein als TG abgekürzt, ist ein natürliches Enzym mit der Fähigkeit die Proteinfunktionalität durch Vernetzung von Glutamin- und Lysinbindungen zu modifizieren. TG ist ein wirksamer Proteinkleber sowie ein Texturverstärker. Die C&P Group extrahiert Transglutaminase aus einem natürlichen Fermentationsprozess. Transglutaminaseprodukte: Pulver Verpackung: Alubeutel