Termékek -ételküldés (9)

Specially for paving blocks, kerb-stones and masonry blocks. Synthetic special-admixture, decreased efflorescence, colour enhancement, dense side- and surface finish, decreasedsticking at the tamper head, considerable improvement of freeze-thaw-resistance.

L-Isoleucin/L-Isoleucine: Schlüsselaminosäure für Muskelwachstum, Energie und Reparatur. Beliebt in Sporternährung und Fitnessprodukten. L-Isoleucin/L-Isoleucine, eine verzweigtkettige Aminosäure (BCAA), spielt eine entscheidende Rolle im Muskelstoffwechsel und -wachstum. Sie fördert die Energieproduktion während intensiver körperlicher Aktivität und unterstützt die Muskelreparatur. L-Isoleucin/L-Isoleucine wird oft von Sportlern und Fitnessbegeisterten eingenommen, um die Ausdauer zu steigern und Muskelabbau zu verhindern. Es hilft auch bei der Regulierung des Blutzuckerspiegels und der Förderung einer stabilen Stickoxidproduktion. Diese Aminosäure ist in verschiedenen Formen erhältlich, darunter Pulver und Kapseln, und wird von Menschen genutzt, die ihre sportliche Leistung steigern oder ihre Muskelgesundheit verbessern möchten. L-Isoleucin/L-Isoleucine bietet eine breite Palette von potenziellen Vorteilen für Fitness und Wohlbefinden.

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

20,00 x 10,00 x 3,00 x 3,00 mm - 100,00 x 50,00 x 6,00 x 6,00 mm, DIN EN 10279 (DIN 1026), Abnahmeprüfzeugnis nach DIN EN 10204 / 3.1, AD 2000 - W2 / W10 4,00 - 6,00 m Werkstoffe: 1.4301/1.4307/TP304/TP304L 1.4571/ TP316Ti 1.4401/1.4404/TP316/TP316L 1.4541 / TP 321 1.4305 /TP303

Kälte- und Wärmeträgerflüssigkeit auf Basis Monoethylenglykol für technische Anwendungen

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing Pre-treatment (surface):sealable, different pre-treatments

Polyester films are usually transparent, flexible and have a high mechanical strength. Polibond is a polyester film with a special transparent matt surface. The chemical primer changes the surface structure of the polyester film and this enables greater adhesion to the surface. The strength of the adhesion can optionally be changed. Polibond has excellent anchorage values ​​for impregnating agents.

Most people are known plastic films to protect food in the household. The POLIFIBRA films GmbH manufactures and assembles polyester and laminated films, which are used because of specific character in different industrial manufacturing sectors. POLIFIBRA provides polyester films with different strongly adhering surfaces. In our product POLI BOND the surface of the PETP film on or treated on both sides in varying degrees. This can be a very significant improvement in the adhesion of coatings to be achieved. POLI BOND can in the film thicknesses 19µ - 350µ are delivered.Different printings require different surfaces. In addition to highly transparent or colored opaque base films we offer here at various coatings that allow easy and quick editing. Seal foils are coated films, the above-defined temperature ranges enable an activation of the coating so as to allow bonding of different products. POLIFIBRA films offers solutions for different temperature ranges and applications.

Thickness range: 25-300 µm monoaxial oriented PP Optics:transparent, white Application:Electrical Industry, Label