R134a is internationally recognizcd asone of the main refrigerant working substances to substitute CTC 12. It doesnot contain chlorine atom, gives no bad effects against ozonosphere and hasexcellent safety performances, such as noninflammability, non-explosiveability, non-toxicity, non-pungency, and non-corrosive ability. It is acolorless gas under ordinary temperature and a colorless & transparentliguid under the pressure of itself. As the substitute for crc 12, it is oftenused in the refrigerating systems of auto air conditioners, commercial ancindustrial purposes, and as the vesicant, it is used to produce theheat-protective material made of rigid plastics, and also to prepare otherblend refrigerants, such as R404A & R407C.
SKU:TH675GL7X13690
Model:67010
Package Dimensions:18.25 x 12.32 x 10.75 inches
Exterior:Steel, brass
Voltage:12 Volts
• According to DIN EN 61810-1, DIN EN 60664-1
• Different pin configurations and pin arrangements
• Clearance and creepage distances:
contact-coil ≥ 8 mm
• Compact size, small height (horizontal model)
• OA 5651, 5661 horizontal models
• OA 5652, 5662, 5692 vertical models
• Solder line proof
Function:Printed circuit board relay
Type of relay:monostabil
Contact material:AgSnO2; AgNi
Continuous current:8 A
Nominal voltage UN DC:6 - 60 V
Voltage Range UN:0,7 - 1,8 V
Test voltage (AC) contact set - coil:≥ 4 kV eff
Clearance and creepage distances, contact set - coil ≥:8 mm
Temperature range (- / +):40 - 80 °C
Protection type:RT II (flux-proof relay)
Size L x W x H:28 x 25 x 10,8 mm
Approvals:cRUus
Relay type:OA 5661
CT-222F 16 channel digital output/24VDC/source type/output 24VDC, the output high level is valid
Module features
the module supports 16 channels digital output, the output high level is valid, the output voltage is 24VDC.
module can drive field equipment. (relay, solenoid valve, etc.)
the internal bus of the module and field output are using opto-coupler.
the module has 16 digital output channel LED indicator light.
the module has the functions of thermal shutdown and overcurrent protection.
the module supports short circuit protection and overload protection.
Wiring:Max.1.5mm²(AWG 16)
Mounting Type:35mm Size DIN-Rail
Size:115*51.5*75mm
Weight:65g
Operation Temperature:-40~85
Protection Class:IP20
Operational Humidity:5%~95% RH(No Condensation)
Product Model:CT-222F
The modul µCAN.4.ao-SNAP features four independent analogue outputs which optionally provide a voltage or a current signal. The CAN interface supports CANopen and J1939 protocols.
Voltage +/- 10 V:Current 0(4)…20 mA
Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA)
Signal output 1 ms / 1 kHz:Signal type freely configurable
Fieldbus CAN:Protocol CANopen / Raw CAN / J1939
The 3RH2911-1FA40 auxiliary switch is designed for use with contactors in the 3RT2 series and contactor relays in the 3RH2 series. It offers 4 normally open (NO) contacts, with each path rated for 0.3/0.4 amps, ideal for providing additional control and signaling functions. The switch is mounted on the front and features screw terminals for secure connections.
Your reference product 2CDS252001R0065 is delivered from 3 days after confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver inFrance, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti, Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal.
How to buy
To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.
Width in Number of Modular Spacings:2
Product Net Width:35 mm
Product Net Height:88 mm
Product Net Length:69 mm
Net Weight:0.25 kg
Pole Net Weight:0.115 kg
Recessed Depth (t2):69 mm
Axial-Querstromgebläse
Noch bessere Anlagerung - weniger Abdrift und Spritzmittelverlust durch gezielte Luftführung. Daher umweltfreundlicher und effektiver.
Top-Serienausrüstung
- mech. Bedieneinheit mit Bowdenzügen
- Saugfilter mit Absperrautomatik
- Druckfilter mit Schnellreinigung
- Behälterfüllstandsanzeige
- Hydr. Rührwerk
- Spülbehälter zur Systemreinigung
- Handwaschbehälter 15 l
- Behälterauslaufhahn
- Gebläse abschaltbar
- Myers-Einzeldüsen mit Tropf-Stop schwenk- und abstellbar (außerhalb vom Luftstrom).
Düseneinsätze Albuz gelb
- Teleskop Gelenkwelle Walterscheid
- Einseitige Abdeckung zu D 36A - für hohe Kulturen
Zusatzausrüstung
- Myers-Doppel- und Dreifachdüse
- Düseneinsätze nach Wahl
- Magnetventile
Einsatzbereich
- Reihenabstand: 1,6 bis 8,0 Meter
- Kultur-Höhe: bis 12,0 Meter
Transmetteur multiparamètre pour montage en armoire de commande et sur rail profilé
Le Liquiline CM442R est un transmetteur multiparamètre numérique facile à utiliser pour la surveillance et le contrôle de process dans toutes les applications même lorsque l'espace est limité. L'intégration système, l'installation et la configuration simples et rapides vous garantissent un gain de temps et d'argent. Le transmetteur 1 à 2 voies compact s'encastre dans n'importe quelle armoire de commande. Le Liquiline CM442R présente tous les avantages d'une plateforme de transmetteur hors pair, de la plus grande simplicité à la sécurité de process maximale.
Transmetteur:IP20
Afficheur en option:IP66
LED 3-fach Temperatur-Anzeige. Die LED Anzeige verfügt über insgesamt 3 digitale, kabelgebundene Temperaturfühler. Die jeweiligen Temperaturanzeigen selber können bis zu +-9°C eingestellt/manipuliert werden. Die Konfigurationseinstellungen werden per IR-Fernbedienung vorgenommen.
Anwendungsbereich:indoor
Schrifthöhe:65mm
max. Leseentfernung:ca. 25-30m
LED Farbe:Rot
Ansteuerung:IR-Fernbedienung
6FC5210-0DF20-0AA0,SINUMERIK PCU 50 566 MHz, 128 MB RAM; 24 V DC; Windows NT Workstation V4.0 for embedded systems (Windows NT 4.0 Workstation for Embedded Systems)
kalibrierte Signalumschaltung
Ein- und Ausgangssignal einfach über DIP-Schalter umschaltbar – ohne Nachjustierung
Universalnetzteil für 20 … 253 V AC/DC
weltweit einsetzbar an beliebigen Versorgungsnetzen
3-Port-Trennung
Schutz vor Messfehlern durch Erdungsprobleme und Störspannungsverschleppung
extrem kompakte Bauform
12,5 mm schmales Anreihgehäuse mit praktischen Steckklemmen
höchste Genauigkeit
keine Verfälschung des Messsignals
sichere Trennung
Schutz des Wartungspersonals und der nachfolgenden Geräte vor unzulässig hoher Spannung
höchste Zuverlässigkeit
Kosten für Wartungsaufwand entfallen
5 Jahre Garantie
Innerhalb von 5 Jahren ab Lieferung auftretende Mängel werden bei freier Anlieferung im Werk kostenlos behoben
Kompakt mit zwei Kanälen bei nur bei 15mm Modulbreite
Digitale Signalfilter im Peripheriemodul
Bis zu 10kHz Abtastrate frei einstellbar
Taktsynchroner Betrieb / optional mit Oversampling
Anschluss einer Vielzahl von Sensoren durch frei einstellbaren Eingangssignalbereich
Werkskalibrierung gewährleistet problemlosen Modultausch
• According to DIN EN 61810-1, DIN EN 60664-1
• Low rated power consumption
• 2 changeover contacts
• Clearance and creepage distances:
contact - coil ≥ 8 mm
• Adjustment to customers specification
• Compact size, small height (at horizontal model)
• OA 5661.12 horizontal mounting
• OA 5662.12 vertical mounting
• Solder line proof
Function:Printed circuit board relay
Type of relay:monostabil
Contact material:AgSnO2; AgNi
Continuous current:6 A
Nominal voltage UN DC:6 - 60 V
Voltage Range UN:0,7 - 1,4 V
Test voltage (AC) contact set - coil:≥ 4 kV eff
Clearance and creepage distances, contact set - coil ≥:8 mm
Temperature range (- / +):40 - 70 °C
Protection type:RT II (flux-proof relay)
Size L x W x H:37 x 25 x 10,8 mm
Approvals:cRUus
Relay type:OA 5661.12
Your reference product 5SM60212 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal.
How to buy
To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging service or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.
Net weight (kg):0.103 Kg
Package dimensions (mm):80.00 x 100.00 x 62.00
EAN:4001869525792
Commodity Code:85362010
Group:5546
Group Code:P310
Your reference product 5ST3645 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal.
How to buy
To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging service or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.
Net Weight (kg):0.113 Kg
Packaging dimensions (mm):73.00 x 216.00 x 40.00
EAN:4001869318554
Code:85369001
Group:5506
Group Code:P310
Your reference product 2CSS245101R0165 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal.
How to buy
To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging service or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.
Width in Number of Modular Spacings:1
Product Net Width:0.018 m
Product Net Height:0.085 m
Product Net Length:0.069 m
Net Weight:0.110 kg
Recessed depth (t2):76 mm
Your reference product 5ST3031 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal.
How to buy
To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.
Net Weight (kg):0.098 Kg
Packaging dimensions (mm):80.00 x 96.00 x 30.00
EAN:4001869187471
Code:85365019
Group:5506
Group Code:P310
The SAE J1939 standard (Serial Control and Communications Heavy Duity Vehicle Network) has originally been designed by SAE International to be used in heavy duty vehicles. In the meantime, the protocol is widely used also in agricultural machinery, rail vehicles and sea vessels and in a wide range of diesel-driven machinery.
Target group J1939 training
The target group of the J1939 intensive workshop is development engineers who are looking for a quick start into handling the communications profile or would like to get an insight into the J1939 protocol stack. Also, we address decision makers and product managers to enable them to assess the suitability of the J1939 protocol stack for their applications.