Termékek a csomagolás (365)

Mantella monouso MATERIALE:PE

HOOD PACKAGING MACHINES - FP 5540 – FP 7060 SERIES L-seal hood shrink packaging machine combines sealing with shrinking into one step. The operator places the product between the two layers of mono-fold film, then moves the package into the sealing area and lowers the hood. When the shrink time is completed, the hood is returned to the up position and the operator may remove the completed package . The transparent cover makes the process of sealing & cutting and shrinking be visible. Colours: dark gray or orange depending on availability. It suitable for PVC shrink films with max. thickness 30 my and POF shrink films with max. thickness 19 my. Two models are available with a support surface of mm. 500x400x250h - mm. 650x550x300h. The dimensions of the support surface are to be considered with the hood closed. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. Example model:FP 5540 Sealing bars dimensions:550x440 Internal hood volume (mm):500x400x250 h Max film roll width (mm):580 Usable film:PVC max. thickness 30 my PPL max. thickness 19 my

Valvola a sfera 2 vie in tre pezzi, passaggio totale [Valpres artt. 713000 F/F - 714000 SW - 715000 BW] acciaio al carbonio LCB con sfera e asta in inox AISI 304

MANUAL CLIPPER FP HR 45M FOR GABIONS Large sturdy manual clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm. Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections. Structure:Steel with rubber handle Charger capacity:40 rings Open ring width (outer):mm 45 Open ring height:mm 24 Opening width:mm 25 Closure diameter:mm 15

BATTERY CLIPPING MACHINES WITH RING LOCK - HR24TP BT Battery-operated clippers with ring closure, for the assembly of mesh cages, springs for mattresses, car seats, fences and packaging. The clippers work with an 18V 2Ah battery, however it is possible to purchase the 18V 3Ah battery with greater autonomy as an option. Battery models can be easily transported from one work area to another without space limitations or used outdoors. They use clips type HR24 with width mm 24, height mm 12 and wire diameter mm 1,8 Example model:HR24TP8-11 BT Magazine capacity:120 rings Closure diameter:mm 7,9-10,7 Rounds per charge:1600-1800 Autonomy:approx. 60 min Ring type used:HR24ZA-HR24 INOX

Automatic strapping machine mod. TP 101, simple and reliable, is an excellent solution for strapping of packages handled by an operator. The positioning of the material to be strapped can be done manually or by means of an idle roller. The operator lunch the strapping by simply pressing the foot control or the start button. The strap is stretched, thermally welded and cut. The arch strap guide is in aluminum. The strapping tool is characterized by a new sealing blade for maximum effectiveness of the closure and an external knob to easily adjust the tension. Worktop with idle rollers. Operation with Mitsubishi PLC, the strapping machine turns off automatically after 60 seconds of inactivity. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:200 Kg

Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding. Example model:ME 305 FDA Seal length:mm. 300 Seal width:mm. 5 Thermosealing materials:PE-PP-AL/PE Max. seal thickness:mm. 0,25

Manual clamp eyeleting machine for eyelets type 7-9-051 and type 31-80 on bags - The GIGA manual eyelet clamp, thanks to the long steel levers, allows the eyelets used for packaging to be applied with minimum effort. Furthermore, by changing only the punches, it is possible to apply the larger eyelets (like sail for towels and banners from VELA 31 to VELA 80) Eyelets used:Type 7-9-051 VL eyelets used: VL large eyelets from 31 to 50 VL and from 60 to 80 VL

BS-5540M-ECO SHRINK TUNNEL - complete with wire mesh carpet for small products Shrink tunnel with high thermal insulation and ample power for all types of shrink film including the film in PE. Maximum thickness film thermoretracting 100 my. In conjunction with the angular sealer BS 8060 L is a complete system for packaging bags, bottles, cans and many other products with high weight. Of course it can be used separately or in combination with other machines. MAIN FEATURES - Finned heaters; - Dual fan for air circulation; - High thermal; - Conveyor belt with metallic mesh; - Conveyor with adjustable speed; - Fan for cooling packages; - Structure with wheels and adjustable feet. Voltage (V-Hz):380-50 (triphase) Power (kW):23 Loading (kg):40 Conveying Speed (m/min):0~8 Tunnel Size (L×W×H) (mm):1450×480×380 External Dimensions (L×W×H) (mm):2550×850×1500 NET WEIGHT (kg):400

Copriabiti varie misure

Valvola a sfera 2 vie [Valpres art. 721000] flangiata PN16, tipo Wafer, acciaio inox AISI 316 CF8M, passaggio totale.

Simple, professional, bench thermosealers, suitable for closing food trays. The FP-TM thermosealers are equipped with a hot plate that, manually lowered by the operator, allows the plastic film to be sealed onto the plastic trays, sealing and protecting the contents. The FP-TM thermosealers are equipped with a temperature selector that makes them easy to use on any type and thickness of film/trays. Depending on the machine and mold purchased, it is possible to heat up a trays or two trays simultaneously. For each type of tray you must use the relative mold. Heating plate:190x150 mm/180x230 mm Maximum trays height:100 mm Usable reel width:150 mm

Sealer machine designed for sealing of packaging of any size in the barrier material (polypropylene, paper and aluminum). Thanks to the small size and limited weight can be used in any place. The clamp sealing double hot bar is available with width mm. 200, mm. 300 and mm. 400 and the welds are repeatable, side by side, regardless of length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C by a temperature controller positioned on the caliper. Example model:300 FRK Length of sealing bar:mm. 300 sealing width:mm. 12 Bar type:striped Weldable material:coupled Preheating:About 5 min

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap. Strap width:mm. 5 – 9 – 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:100 Kg

Place the pallet on the platform, attach the film to the base, select the wrapping program and press the start button.The machine automatically winding and stops. Cut the film manually. On requrest we can produce wrapping machines with: Rotary table diameter mm. 1800 - 2000 Electronic balance with load cells Load/ Unload rollers STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product Maximum load:Kg. 2000 Pallet max height:mm 2200 h (2700 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V 50Hz. + T + N Installed electric power:0.75 kW Machine dimensions:1500 x 2500 x 2550h Weight:Kg. 500

Rotating platform Mod. FP T 1500 with recess for transpallet insertion, table diameter mm. 1500 and 90° load (only base without column). Following some modifications made to the machines it is no longer possible to have front loading. The pallet must not have the lower sleepers on the insertion side of the pallet truck. In the basic version, for safety reasons, the operator must always keep the button or the footswitch pressed during winding. Releasing it, the rotary table stops randomly, so you must manually align the platform to the unloading position. When ordering, it is possible to purchase the surcharge for the electrical system with PLC LOGO SIEMENS, complete with safety photocell on the pallet load, programming of the number of revolutions, variation of the table speed (inverter) and stop in the unloading position. With this modification the power supply of the table goes from 380V to 220V. MAX CAPACITY:Kg. 1000 (1500 with optional) Turntable diameter:mm. 1500 Max. pallet dimensions:mm. 1000 x 1200 Turntable speed:7 rpm Turntable height:mm. 90 Power supply:380V - 50Hz (220V with PLC optional) Installed power:Kw. 0,4 Dimensions:mm. 1650 x 2520 x 500 H Weight:Kg. 300

The robot stretch wrapping machine model. FP EASY ECO, battery-powered and automatic steering with overrunning side wheel (CE). Turning around the pallet automatically performs the film wrapping or network. Equipped with manual steering for driving forward and backward buttons, traction batteries maintenance-free gel, current transformer 24 V DC - 220 V AC, built-in charger, electric motors, three-phase inverter driving wheel height adjustment, front bumper security.Place the machine near the load to be wrapped Hook the film or the net to the load Select the wrapping program Press the start button The machine rotating around the load makes the winding and stops at end of cycle Cut the film manually Please note that the machine has a driving wheel side wheel to be placed in contact with the load, if the load surface or irregular shape must assess the suitability. Max height of load:mm 2000 Integrated charger:220V Autonomy:100 pallets Dimensions:mm 700 x 1500 x 2250 h Weight:Kg. 250

Impulse manual bag sealers machines FPS series are the simplest and most economical series of sealers machines. The model FPS-C is equipped with a cutter for trimming the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. This model is only available in sizes 300 and 400 mm. The sealers FPS/FPS-C are suited to a medium-low production and allow the closing of plastic bags without folding, with maximum thickness of 0.15 mm (0.30 mm total). The sealing is by impulse (the resistance heats for a few seconds) and can be adjusted by timer. The sealing cycle is generally 3 seconds and is indicated by an indicator light. These sealers has a sealing width of 2 mm. Example model:FPS 300 Sealing bar:mm. 300 Sealing width :mm. 2 Alimentation:220V

Special sealers ME 455/605 VAD with air suction system (max 80%) suitable for volume reduction and better preservation of products. The machine is equipped with a double sealing bar with a sealing width of 5 mm, an electric pedal drive and pneumatic cylinders, mobile nozzles for air intake, an adjustable timer for suction, sealing and cooling. The ME 4510/6010 VAG model with a ATM gas injection system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling. Max. seal length:mm. 450/mm. 600 Seal width:mm. 5 Sealable materials:PE-PP-AL/PE

Digital and semiautomatic bench sealer, with electric pedal and sealing bars at constant temperature, for closing polypropylene bags and laminated / laminated aluminum, paper, barrier materials, etc. The "hot bar" type sealing bars are equipped with resistance and electronic thermoregulator. Thanks to the new latest generation electronic control card, all controls, adjustments and alarms are more easily set. The digital control of temperature, time and pause interval, it is more precise and functional, thanks to the new control panel, and to the large 1-line by 16-character alphanumeric LCD display. Temperature adjustment 0-150 ° C, with alarm of ± 5 ° C with respect to the set temperature. The closing of the bars takes place by means of an oversized electromagnet which guarantees a high sealing pressure and allows the sealing of high thickness envelopes with or without side gussets. For a higher production it is sufficient to select the automatic cycle with timed closing. Seal bars length:mm. 300 Seal width :mm. 13 Temperature range:0°C÷150°C

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm). Model:ME 3010 FH Max. seal length:mm. 310 Seal width:mm. 10 Dimensions:mm 420x370x270 h Weight:Kg. 12

New packaging system that creates air cushions on the spot. Fast, cheap and sile - The cushioning machine AIR BAG FP 600 G is compact and silent and allows you to create air cushions for packaging. It is suitable for use in the food, pharmaceutical, farm and wine industries and wherever it is necessary to pack fragile products such as glass jars, bottles and fragile products. Speed:0-20 m/min Cushions width:mm. 200-400 Film thickness:20 micron Sealing temperature:90-150°C Absorption:450W

Automatic banding FP TZ 888 simple and inexpensive, using paper and polypropylene tapes 30 mm. width. Maximum useful sizes mm. 240x140 h. (lenght unlimited). Speed up to 25 cycles per minute. The tape's tension is adjustable by knob. Manual or automatic operation. The banding FP TZ 888 in addition to the classic use in graphic arts, binders, paper industries, is particularly suitable for the realization of multi-packs or for the matching of multiple products in sales promotions. Useful dimensions:- Width from 40 to 240 mm. - Height from 5 to 140 mm - Lenght from 50 mm. to unlimited Max speed:25 cycles/min. Tape width:mm 30 Electric Supply:220V - 50 Hz - 150W

Mechanical eyeletting machine with double heads for 9 mm eyelets, 7 mm, type 051 - Eyeleting with mechanical pedal, double head with automatic feeder and support frame, suitable for any process where it is required the simultaneous closing of the two eyelets. The eyeletting is applied in the paper converting industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags. Steel painting base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051 Distance between heads:from mm. 40 to mm. 200

Pneumatic strapping tool with seal for flat and round packages. Suitable for strapping round packages and goods with small contact surfaces. Rugged, lightweight, compact, it is suitable for medium/light applications. Available in three versions: 1500N - 3000N - 4500N. Works with glossy or blue strap from mm. 13 to mm. 19 with max. thickness of 0.6 mm. The strap held depends on the type of material to be strapped and the strapping choice. Model:MOD. ST 13-16-19 Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Seal overlap - length mm. 24 Weight:Kg 4,5

FP 15 SE STRETCH-WRAPPING MACHINE with electronic board and digital keyboard, inverter to control the progressive start and turntable rotation speed, 4 wrapping programs, electromagnetic clutch for film tension control, photocell for automatic reading of the pallet height, manual hook up/cutting of the film, and automatic wrapping cycle (CE-standard). Max load capacity:Kg. 2000 (3000 kg with optional) Turntable diameter:mm. 1500 Max pallet dimensions:mm. 1000 x 1200 Max pallet height:mm 2200 h (3000/3200 mm with optional) Turntable rotation speed:4 - 7 rpm Turntable height:mm. 75 Installed power:Kw 0.6 machine size :mm. 1500 x 2500 x 2550

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

Pneumatic eyeletting machine with double heads for 9 mm eyelets, 7 mm, type 051 - Pneumatic eyeletting with dual head with automatic feeder, suitable for any process where it is required the simultaneous closing of the two eyelets, complete with support frame and security guards. The eyeletting is applied in the paper industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags. Steel painting base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051 Distance between heads:from mm. 45 to mm. 100 (from mm. 45 to mm. 180 optional)

Suitable for all types of neutral or printed film (preferably with antistatic treatment) or tubular polyethylene with thickness from 0.06 mm to 0.13 mm or tubular polypropylene with from 0.03 mm to 0.05 mm thick, and cartene normal or high density. Furthermore, with the FP BAG EVO it is also possible to use expanded polyethylene (FOAM) in tubular reel with a maximum thickness of 1.5 mm. It can use reels with a width of 80-300 or 100-500 mm without disassembly of parts or changing settings. The packaging machine automatically perform the forming of the bag with the upper opening. The filling of the bag and the subsequent closing can be done manually by an operator who starts the cycle of the machine through a button, or automatically by means of feeders, manipulators, weighers. The reel change takes a maximum of thirty seconds. The machine cycle time for the preparation of a bag 200 mm long is about four seconds. Example model:FP BAG EVO 300.1 Film reel width:mm 80-300 Reel external diameter:max. mm 350 Reel maximum weight:kg 15 Bags lenght:mm 25-999 Production:10-20 pieces/minute (depending on the length) Usable film:tubular polyethylene thickness from 60 to 130 microns Usable film:expanded polyethylene with a maximum thickness of 1.5 mm Usable film:polypropylene and HDPE film with thickness from 30 to 50 microns

PORTABLE INKJET MARKER MOD. FPA2-SMART MOB - MAXIMUM PRINTING HEIGHT 12.7 mm New portable inkjet marker, suitable for marking on porous, semi-porous (boxes, cardboard boxes) in different work stations. Allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on 4 lines with a total height of 12.7 mm. The marking speed is set directly on the marker keypad and you can always write accurately and without deformation of the characters. The cartridges are independent and directly in contact with the print head. The marker is equipped with an automatic nozzle cleaning system so in case of very long machine stops, there is no danger of blocking, but simply replace the exhausted cartridges without further maintenance. The message to be printed can be set by PC in any Word font format. To use it, simply save it on the SD card included in the machine. Printable products:Porous and semi-porous surfaces Print engine:Hewlett-Packard Thermal Ink Jet Technology 2.5 Print speed:57 m/min at 400 dpi, horizontal resolution Maximum printing height:12,7 mm Minimum printing height:2,7 mm Print distance:6 mm recommended Memory:999 messages for a single SD card Printable elements:alphanumeric writings, logos, date/time, codes, counter, lot and barcode Autonomy in use:7 hours (9 hours on standby) Battery life:more than 300 cycles