Termékek a polimer (15)

Syntech Bioflex Anti-acid coating based on modified epoxy and polysulphide polymers, for the waterproof coating of concrete and steel tanks, tanks and containment tanks. High mechanical and abrasion resistance High adhesion to surfaces Good elasticity High chemical resistance to acids, bases and solvents Very high tenacity and ease of cleaning and maintenance Applicable to heavy thicknesses. Anti-acid waterproofing protective coating for the chemical industry Internal and external lining of tanks, tanks, cisterns, towers, pylons, etc. Waterproof protective coating of digesters of biogas and purification plants Anti-acid protective coating for sewers, secondary tanks, sewer collectors, channels and ducts intended for the containment of waste water and drainage Anti-acid coating of fiberglass tanks for the chemical industry. From 0.40 to 0.50 kg of Syntech Bioflex for each square meter of surface to be covered, applied in two coats. Can 6.1 kg [A] - Can 3.9 kg [B] - Kit: 1 Can 6.1 kg [A] + 1 Can 3.9 kg [B]

Le nostre manopole possono essere realizzate in colori standerd da polimeri senza alcuno trattamento. I colori disponibili sono nero lucido, nero sabbiato ed oliato, bianco 9010.61, bianco C 1013.40, avorio C 1015.46, marron 353

Filetto Gas

Automatic Determination of Drop Point and Softening Point A drop point system is an analytical instrument used to determine the drop point and softening point of substances such as fats, pitch, polymers, and more. The drop point is the temperature at which the first drop of melted substance falls. The softening point is the temperature at which the melted substance flows a given distance. METTLER TOLEDO's drop point system automatically determines both the drop and softening points.

Gear hobbing with special profiles and particular pressure angles, internal toothing (broaching), segment gears for the aeronautical industry, special parts for the medical devices industry and conical gears carried out with the system “Conikron”. Gears in different types of materials such as steel, stainless steel, brass, bronze, aluminium, polymers, bakelite etc… On request, we can supply a finished product complete of thermal and surface treatments. Gear cutting of outer diameters from min. 3mm to approximately 50mm carried out in automatic unmanned mode and manual gear cutting up to a max. length of approximately 100mm. Max. Length of parts subject to gear cutting: approximately 100mm. We can also supply oriented-toothing, synchronized toothing and crown gears. Our company can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders.

Syntech Roadware Syntech Roadware is a high penetration two-component hybrid urethane which, combined with quartz, produces a hard and instant polymer to repair cracks and crevices in concrete floors. Syntech Roadware has a very low viscosity allowing the penetration of the product in depth, even in the narrowest cracks. It has short reaction times, in fact in 10 minutes at 20°C the material polymerizes completely and catalyzes quickly even in environments with temperatures below 0°C. It has good resistance to chemical attack. When combined with quartz powder, Syntech Roadware, forms a highly resistant compound with properties similar to existing concrete but with the flexibility that persists over time. Repair of splits or cracks in concrete, restoration of deteriorated concrete degradation, repair of cracks and pop-out phenomena in concrete. Slightly widen the crack with a circular saw to facilitate the penetration of Syntech Roadware. Before applying the product, vacuum the dust created. The support must be clean and free from dust or dirt. Apply Syntech Roadware directly on the crack or on the degraded area until the gap is completely saturated. Add quartz directly to the crack and repeat the Syntech Roadware application operation. Smooth with a spatula and leave the product to work. With a Syntech Roadware cartridge, an average of 50 linear metres of gap of 5 mm width is repaired. Bi-mix cartridge 600 ml

Armaglass Structura 115 115 g/m2 structural reinforcement mesh in alkali-resistant fibreglass with 12 x 12 mm square mesh, containing >16% zirconium dioxide, constructed with a leno weave and primed with thermosetting polymer. It is straightforward and quick to apply, simple to handle and easy to cut. Resistant to atmospheric agents and aggressive environments, conferring durability to the composite systems in which it is used. Suitable for any substrate and perfectly compatible with both cement- and lime-based mortars. Perfect for strengthening reinforced plastering with an anti-overturning function along with the structural consolidation of masonry and vaulted structures. Easy and quick application, simple to handle and to cut. Combines lightness and thinness with excellent mechanical characteristics in terms of the weft and warp. Resistant to atmospheric agents and aggressive environments, it confers durability to the composite systems in which it is used. Suitable for any substrate and perfectly compatible with both cement-based and lime-based mortars. Armaglass Structura 115 is a mesh for the structural reinforcement and consolidation of masonry and vaulted structures. It is ideal for reinforcing plasters with anti-overturning function. Application on masonry and vaults: In the event that connectors are being used, proceed with creating holes of a suitable diameter, in accordance with the chosen connection system and arranged in line with the design instructions and with the selected connection system (Armaglass Connector, Armaglass Connector SINGLE, Armaglass Connector Twin). Secure the connectors with resin anchors (Syntech Profix) or hydraulic binder-based slurry (Grout Cable, Sanafluens). Apply an initial layer of mortar (see the technical data sheet of the selected product), positioning the Armaglass Structura 115 mesh on the still-fresh mortar, taking care to ensure an overlap of at least 10 centimetres, before applying the second layer of mortar. Whilst the mortar is still fresh, lay the mesh sheeting, proceeding from top to bottom, and immersing with the help of a putty knife, being sure to overlap each segment by at least 10 centimetres and impeding the formation of bubbles and bends. 1.1 m/m²: The sheets adjacent to the fibreglass mesh are to be overlapped along the edges by at least 10 centimetres. Packaging: Roll of 50 m2 UM: €/m2

Girante e diffusore in ghisa meccanica, albero pompa in AI5I 304, Mandata e gabbia di aspirazione in ghisa meccanica

Girante in tecnopolimero, DifTusore in Noryl, Camicia esterna in AI5I 304, Mandata e gabbia di aspirazione in acciaio inox AI5I 304

Girante in tecnopolimero, DifTusore in Noryl, Camicia esterna in AI5I 304, Mandata e gabbia di aspirazione in ottone Impeller inTechnopolimer, Diffuser in Noryl External Sleeve in AI51304, Delivery bouul and suction cage in Brass

Girante in tecnopolimero, Diffusore in Noryl, Camicia esterna in AISI 304, Mandata e gabbia di aspirazione in ghisa

Girante e diffusore in acciaio inox microfuso AISI 304# albero pompa in AI5I 304, Mandata e gabbia di aspirazione in acciaio inox micorfuso AISI 304

NC gear hobbing from module 0.15 to module 1.5 , in various materials such as steel, stainless steel, brass, bronze, aluminium, polymers, bakelite and others. We can also supply a finished product, complete with thermal and surface treatments on request. Gear cutting of outer diameters from min. 3mm to approximately 50mm in automatic unmanned mode. Maximum length of parts subject to gear cutting: approximately 100mm. We are capable of supplying oriented-toothing, synchronized toothing, crown gears with special profiles and can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders.

NC gear hobbing with standard profiles XL, MXL, T, HTD, GT or special profiles manufactured with special purpose tools. Production of items, which are normally in aluminium, available also in brass, steel or polymer. On request: Galvanic treatments such as anodizing, phosphating, nickel-plating etc… Gear cutting of outer diameters from min. 6mm to approximately 50mm in automatic unmanned mode. Max. Length of parts subject to gear cutting: approximately 100mm. Our company can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders. We can deliver finished products complete with belt containment flanges.

NC worm milling of profiles by means of millers from module 0.2 to module 1.5 (in some cases, up to module 3) in various materials such as steel, stainless steel, brass, bronze, aluminium, polymers, bakelite and others. We can supply a finished product, complete with thermal and surface treatments on request. Gear cutting of outer diameters from min. 3mm up to approximately 50mm in automated unmanned mode. Max. Length of parts subject to gear cutting: approximately 100mm. We can also supply oriented-toothing or toothing with special profiles. Our company can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders.