Termékek ablaktelepítés becslések (72)

It is an innovative facade system that is especially preferred in high-rise buildings, is manufactured entirely in a workshop environment and allows rapid assembly without scaffolding. USG 80 panel facade system, which has high performance values, is applied with a special design for the project. The system, in which all panel manufacturing, including glass, can be done in a workshop environment with high workmanship quality, is formed by hanging the produced panel modules on the facade, one by one, without installing scaffolding, especially in tower type buildings. The 3-row wick structure between the modules provides the system with a tolerance gap in seismic movements such as earthquakes and provides high performance. The covered, silicone and semi-covered appearance offered in standard facade systems is also offered in panel facade systems. All openings such as reverse transom, parallel and standard wing openings on the facade can be made with this system. System Visible Width:80 mm System Depth:85 – 155 mm Applicable Glass Thickness:6 – 34 mm Air Impermeability:A4 – 600 Pa / EN12152 Water Tightness:RE1500 – 1500 Pa / EN12154 Wind Load Resistance:2400 Pa / EN13116 Thermal Insulation:Ucw < 1.6 W/m2K

It will provide good solutions to realize your designs with its perfect carrier and mechanics in creating natural stone-looking facades.

Palace ALUFACE

In glass railing solutions, it holds the glass on the ground from multiple points with its reliable and healthy connections made of aluminum profile and offers decorative alternatives at the record level. It can be applied in glass thicknesses of 17.5 mm, 21.5 mm and 16 mm.

The ADD ON system, which allows the carrier profiles to be made of steel at points where the openings allowed by the aluminum horizontal and vertical carrier profiles in the facade systems are not sufficient for the projects, can offer more transparent surfaces to designers. It is a system that can be used in projects made with steel construction, which has more load-bearing properties, instead of deep aluminum profiles, in large spaces where large openings must be crossed at once, such as airports and auto showrooms. The system, where the system depth is shaped by steel and glass combinations used in the standard FS 50 system can also be used, is preferred by designers due to its high inertia values. The system consists of aluminum profiles with a wall thickness between 1.8 mm and 2.0 mm combined with steel profiles selected for the facade. System Visible Width:50 mm System Depth:Shaped by the steel to be used Applicable Glass Thickness:6 – 52 mm

Uninsulated sliding is bad. There are two alternative size solutions: Small and Large tuba riding.

It is a new generation facade system that offers all the necessary expansions for projects with Covered (K), Semi-Covered (V) and Silicone (S) alternatives. Unlike conventional 50 mm wide facade systems, its 60 mm size gives the system the ability to pass larger openings and make more glass area. It offers the opportunity to be used in all projects designed for different purposes with its horizontal and vertical carrier profiles at different depths. The system, which includes insulators of different sizes to achieve high thermal values, is an ideal solution for vertical facades as well as inclined surfaces and roof applications. The system allows the use of glass up to 52 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. System Visible Width:60 mm System Depth:80 – 205 mm Applicable Glass Thickness:6 – 52 mm Air Impermeability:A4 – 600 Pa / EN 12152 Water Tightness:RE750 – 750 Pa / EN 12154 Wind Load Resistance:1440 Pa / EN 13116 Thermal Insulation:(Uf) < 1.9 W/m²K

These are systems designed to achieve a transparent appearance on the facade, where the glass is connected to the carrier system (steel column-beam, glass or steel tension system) with special stainless glass holders. Glass can be applied as tempered laminated glass or tempered double glass. The joint gaps between the glasses can be insulated with UV resistant silicones.

SG 50K is a thermally insulated silicone facade system with a section depth of 50 mm. Vertical profiles with depths to meet different static values ​​are available in the system. Thanks to the condensate channel in the vertical profiles, facade water is easily discharged. In this system, air and water impermeability is maximized and application problems are eliminated. The hidden wing allows application with or without nails. Visible Internal Part:50 mm Visible External Part:16 mm Glazing Method:Bonding Applicable Glass Thickness:24 mm Sash Alternative:Insulated - Non-insulated

SARAY COTTA, the latest product developed by SARAY R&D, offers architects an alternative material for facade cladding. Saray Cotta is a system consisting of 100% Aluminum profile. Its feature is that it can be produced in brick or wood appearance. It provides an aesthetic appearance on the facade with its horizontal and vertical joints. Saray Cotta has the opportunity to be produced in the desired size according to the architectural project and the condition of the facade, and provides great advantages in terms of workmanship, time and cost. Additionally, thanks to its low unit weight of 7 kg/m², it does not impose any additional load on the building. And with this feature, it provides a great advantage in terms of labor, time and cost compared to baked clay materials. Saray Cotta profiles produced with Qualicoat paint technology do not get dirty, do not fade, are safe against fire, long-lasting and environmentally friendly.

It has a section depth of 50 mm. It is possible to apply vertically without notching the horizontal profile. It has the feature of being easy to work and economical. It has few accessories, easy assembly and fast manufacturing features. A condensate channel system can be created without notching by using both notched and special accessories. It has the features of covered - silicone facade, horizontal covered - vertical silicone, vertical covered - horizontal silicone, outward opening transom wing (insulated, uninsulated) and openable wing. Visible Internal Part:50 mm Visible External Part:20 mm Glazing Method:Bonding Applicable Glass Thickness:24 mm Sash Alternative:Insulated - Non-insulated

Saray A2 Mineral Dolgulu