Termékek ablaktelepítés becslések (1275)

The sliding system offers a discreet presence in contemporary homes, combining high thermal performance with minimalist design. Heel depth 40 / 70.5 mm Sash depth 63 mm Maximum glazing depth 32 mm Maximum sash weight 250 kg Opening possibilities Slide of 2, 3 and 4 sheets System with 2 or 3 tracks Possibility of a single running path (sheet + fixed) Coeficient de transfer termic Uw de la 1,43 (W/m²K) Izolare acustica maxima Rw = 42 dB Permeabilitate la aer CLASA 3 Etanseitate la apa 7A Rezistenta la vant C5

Designed with a specific purpose, this LOVE collection is here to embrace the passion for beauty. The elegant lines and feminine silhouette give your clothing collections the attention they deserve. Each piece in the LOVE collection expresses a certain feminine power that adds an extra touch to your display. 4 Poses including one seated. Available in any color.

Right 70 mm pedestrian door system with Thermal Barrier for commercial spaces and buildings. Heel depth 70 mm Sash depth 70 mm Profile thickness 2 mm Polyamide bar length 34 mm Door Maximum sash width (L) 1800 mm Maximum sash height (H) 3000 mm Door with hidden hinges Maximum sash width (L) 1500 mm Maximum sash height (H) 2700 mm Maximum depth of glazing 54 mm Maximum sash weight Door 220 Kg Door with hidden hinges 120 Kg Opening possibilities inner Swing with 1 and 2 leaves outside Swing with 1 and 2 leaves Automatic opening Inner and outer hinge with 1 sheet Possibility of meeting at 90º without light switch Coeficient de transfer termic Uw de la 0.9 (W/m²K) Izolare acustica maxima Rw = 38 dB Permeabilitate la aer (UNE-EN 12207) CLASA 4 Etanseitate la apa (UNE-EN 12208:2000) CLASA 6A Rezistenta la vant (UNE-EN 12210) CLASA C4 Rezistenta la impact cu un corp moale (UNE-EN 13049) CLASA 5 (max) Rezistenta la deschideri si inchideri repetate (UNE-EN 1191) 1.000.000 cicluri

"" Grande variété de meneaux (de 16 à 230 mm) et d'impostes (de 22,5 à 205,5 mm) qui répondent aux différentes exigences esthétiques et constructives du secteur architectural. " Section intérieure vue : 52 mm " Vaste gamme de profils, dont les unions mécaniques permettent de réaliser tous les types de façades (verticales, inclinées, angles à 90°, coins, polygonales) ainsi que de résoudre des modulations de vitrage importantes et lourdes. " Eléments d'étanchéité : pipettes de drainage, joints à bandes déchirables et cornières vulcanisées. " La fixation du vitrage aux profilés de support s'effectue à l'aide de clips. Ce système nécessite un profilé supplémentaire qui s'insère dans la chambre de vitrage (profilé en U). " Il a un style "verre seul" à l'extérieur"., "" Vitrage Vitrage maximum 64 mm* Vitrage minimum 6 mm *Nous consulter pour des épaisseurs supérieures " Possibilités d'ouverture Cachée à guillotine " Sections Meneau 52 mm Traverse 52 mm

» Wide variety of mullions (from 16 to 230 mm) and transoms (from 22.5 to 205.5 mm) that solve the different aesthetic and constructive needs of the architectonic sector » Internal seen section: 52 mm » Extensive profile range, their mechanical unions allows for all types of façades to be built (vertically, inclined, 90° corners, corners, polygonal) as well as solving large and heavy glazing modulations » Water tightness elements: drainage pipettes, tear strip gaskets and vulcanized angles » The fixing of the glazing to the supporting profiles is carried out by using clips. This system requires an additional profile that is fitted into the glazing chamber (U profile) » It has a “glass only” style on the exterior » Glazing Maximum glazing 64 mm* Mínimum glazing 6 mm *Consult us for greater thicknesses » Opening possibilities Hidden Top Hung » Sections Mullion 52 mm Transom 52 mm » Profile thickness Mullion 2.1 and 3 mm Transom 2.1 mm

It ensures maximum comfort by reducing heat transfer, managing to keep heat in the house and reduce costs. The complex design offers the possibility of using hidden hinges, offering a minimalist look. Heel depth 80 mm Sash depth 80 mm Profile thickness 2 mm Polyamide bar length 34 mm Door Maximum sash width (L) 1800 mm Maximum sash height (H) 3000 mm Door with hidden hinges Maximum sash width (L) 1500 mm Maximum sash height (H) 2700 mm Maximum glazing depth 64 mm Maximum sash weight Door 220 Kg Door with hidden hinges 120 Kg Opening possibilities inner Swing with 1 and 2 leaves outside Swing with 1 and 2 leaves Automatic opening Exterior with 1 sheet

It stands out with its molding system that can be applied on wall thicknesses from 85 mm to 270 mm. It can be applied to interior doors with wooden and aluminum joinery. System Depth (Mulleted door frame):71.6 mm System Depth (Mullet):66 mm Applicable Wooden Door Thickness:40 mm

We are delighted to present our Aion collection. Characterized by its details, natural materials, simplicity, ease of dressing, and an extra touch of elegance.

A solar protection system for façades. This system of extruded aluminium louvres allows the light to be regulated and achieves notable savings in interior refridgeration due to the creation of shaded zones that reduce the need for energy in those areas. In order to cover a variety of requirements, there are louvres of distinct dimensions that can adapt to all types of project. This is a system with 2 louvre types: fixed and adjustable. The first type presents regulating possibilities in gradient with angles of 0º, 15º, 30º & 45º. The adjustable louvres also have an option to be motorized and as an option the regulating mechanism can be hidden which then allows the possibility of having an aesthetically pleasing clear façade. The Louvre that is used is shaped elliptically and can be placed vertically or horizontally. This individual elliptical shape not only allows that the less beneficial effects of solar light are avoided but also works as a decorative architectonical element.

"" Solution complémentaire conçue pour être placée à l'extérieur des fenêtres au moyen de fixations cachées. " Elle permet d'ouvrir les fenêtres et les portes en toute sécurité et de bénéficier d'une vue dégagée.", "" Vitrage Ce système de garde-corps offre 8 possibilités de vitrage : double vitrage feuilleté de 8 ou 6 mm relié à un maximum de 4 butyrals de polyvinyle de 0,38 mm. L'utilisation de verre trempé est conseillée. Composition 8 - 1.52 - 8 8 - 1.14 - 8 8 - 0.76 - 8 8 - 0.38 - 8 6 - 1.52 - 6 6 - 1.14 - 6 6 - 0.76 - 6 6 - 0.38 - 6 Largeur maximale 1 800 mm " Finitions Peinture poudre couleur / Anodisé" Traduit avec www.DeepL.com/Translator (version gratuite)

Our STYLEWALK mannequin emphasizes grace and femininity. Every movement exudes elegance. The perfect choice to showcase your clothing in a serene manner. 7 different poses available in every color.

ERIC is the plus-size model that finally helps you showcase clothing that fits perfectly for a larger size. Eric is the model representing the clothing of a tall man.

It is a carrier carcass system on which ceramic material can be mounted. It is advantageous in terms of stock costs because it consists of a small number of profiles and accessories. These systems are generally described as ventilated facade cladding, and the substructures to be used in these systems must be resistant to corrosion. For this reason, the carrier system and its accessories, consisting entirely of aluminum profile and stainless steel, make the SS 54 system advantageous.

It presents the option of using sheets with rounded or straight aesthetics, leaving the opportunity for a special personalization. Thus, each installation is unique, each project is a different kind of experience. Heel depth 60, 65, 67 and 80 mm | 106 and 126 mm with three tracks Sash depth 33 and 37 mm Profile thickness 1.5 mm Polyamide bar length 14.6 - 20 mm Maximum sash width (L) 2200 mm Maximum sash height (H) 2600 mm Maximum glazing depth 26 mm The maximum weight of the sash 100 Kg perimeter sheet | sheet per head 200 kg Opening possibilities Slide of 2, 3, 4 and 6 sheets Version with 3 tracks Galandage version with 1 and 2 running ways of 1, 2 and 4 sheets

The space-saving feature of sliding in the interior and the high performance feature of the window are combined. The high air, wind and water impermeability values ​​brought by the Smart Slide system allow the sliding system to be easily applied even in high-rise buildings. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. Sliding system with the best performance value in the industry, with a water impermeability value of E1500 / 1500 Pa in EN standards, as determined by tests carried out in accredited test centers. The system allows multi-point locking. The system allows the use of glass up to 44 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. In the system with a case depth of 144 mm, the wing depth is 51 mm. System Depth (Case):155 mm System Depth (Sash):71.5 mm System Height (Case):71.5 mm System Height (Sash):104.5 mm System Height (Case + Wing):152 mm System Visible width (Stamp):117.5 mm Applicable Glass Thickness:32 mm Air Impermeability:A4 – 600 Pa / EN 12207 Water Tightness:E1500 – 1500 Pa / EN 12208 Wind Load Resistance:C5-B5 – 2000 Pa / EN 12210 Thermal Insulation:(Uf) < 1.4 W/m²K

It is an innovative facade system that is especially preferred in high-rise buildings, is manufactured entirely in a workshop environment and allows rapid assembly without scaffolding. USG 80 panel facade system, which has high performance values, is applied with a special design for the project. The system, in which all panel manufacturing, including glass, can be done in a workshop environment with high workmanship quality, is formed by hanging the produced panel modules on the facade, one by one, without installing scaffolding, especially in tower type buildings. The 3-row wick structure between the modules provides the system with a tolerance gap in seismic movements such as earthquakes and provides high performance. The covered, silicone and semi-covered appearance offered in standard facade systems is also offered in panel facade systems. All openings such as reverse transom, parallel and standard wing openings on the facade can be made with this system. System Visible Width:80 mm System Depth:85 – 155 mm Applicable Glass Thickness:6 – 34 mm Air Impermeability:A4 – 600 Pa / EN12152 Water Tightness:RE1500 – 1500 Pa / EN12154 Wind Load Resistance:2400 Pa / EN13116 Thermal Insulation:Ucw < 1.6 W/m2K

This device comprising of two pieces located in the window ironmongery, allows a tiny opening (6 to 8 mm) that ensures a slow and gradual air entry whilst maintaining the window in the closed position. It can be applied to all types of openings: practicables, turn/tilts and sliders. The microventilation's mechanism for practicable and turn/tilt Windows can be regulated allowing variations in the ventilation flow.

Standard: Profilo profondità (telaio e apertura) 70 mm apertura di 120 o 105 mm Soglia da 20 mm Aperto a: dentro al di fuori Riempire il pannello coibentato o i pannelli di vetro spessore: 24 ÷ 36 mm

Looking for a touch of lightness? Choose the elegant and playful mannequins from the Stylecats collection. The movement of the hips, shoulders, and hands will immerse your display in an atmosphere of frivolity. 3 different poses including 1 seated position. Available in all colors.

It will provide good solutions to realize your designs with its perfect carrier and mechanics in creating natural stone-looking facades.

A light curtain walling system with thermal insulation. With a seen internal section of only 18 mm, both in the mullion as well as the transom, this new façade system presents a minimalist style and slenderness allowing a total entry of light to the interior of the building. The mullion and transom profiles equalize its depth giving rise to a flush assembly that provides uniformity to the internal style of the façade. The glazing is achieved by fixing the glass using aluminium pressure covers, both in vertical as in horizontal, in such a way that the external view is 52 mm and internally is only 18 mm.

Die Schaufensterpuppe Mann Sport ist auf Rennen positioniert. Die männliche Schaufensterfigur Sprinter ist schwarz lackiert und hat einen Sockel. Die Herren Schaufensterfiguren Sport sind auf Lager und werden sofort nach Ihrer Bestellung geliefert. Die Herren Schaufensterfigur Sport mit abstraktem Kopf in mattschwarzer Farbe ist ideal, um Ihre neuesten Lauf- oder Sportoutfits zu präsentieren. Die Sprinter Sport Schaufensterfiguren sind muskulös und kräftig. Unsere Sport-Schaufensterfiguren sind leicht aufzustellen und in Ihren Geschäften und Sportstudios zu warten. Zögern Sie nicht, sich von unserem Team beraten zu lassen, wenn Sie Fragen zu unseren sportlichen Schaufensterfiguren haben.

Heel depth 80/70 mm Sash depth 80/70 mm Profile thickness 2 mm Polyamide bar length 32/24 mm Door Maximum sash width (L) 1800 mm Maximum sash height (H) 3000 mm Door with hidden hinges Maximum sash width (L) 1500 mm Maximum sash height (H) 2700 mm Maximum depth of glazing 54 mm Maximum sash weight Door 220 Kg Door with hidden hinges 120 Kg

S560 is the optimal sliding system for large spaces, offers maximum safety and facilitates natural light. Heel depth 136 mm Sash depth 56 mm Profile thickness 2 mm Polyamide bar length 24 mm heel Sash 16-24 mm Maximum glazing depth 43 mm The maximum weight of the sash 300 kg Opening possibilities Slide of 2, 3, 4 and 6 sheets System with 2 or 3 tracks Possibility of a single running path (sheet + fixed) Double glazing with fixed side panels

Profilé à géométrie spéciale qui évite le coincement accidentel lors de la fermeture de la porte. Le panneau, élément essentiel dans la fabrication des portes sectionnelles, a été sélectionné en tenant compte des caractéristiques de sécurité, de robustesse, d'isolation, de couleur, de texture et d'esthétique les plus élevées. Réalisé en double tôle d'acier galvanisé avec un intérieur en polyuréthane expansé de 40 mm d'épaisseur, qui, avec le joint lui-même, assure une isolation thermique et acoustique maximale et une bonne étanchéité à l'air, garantissant ainsi un grand confort dans l'habitation.- CE Certification européenne ; Fonctionnement silencieux ; Matériaux à haute durabilité et longévité ; Sécurité contre l'écrasement des doigts ; Panneau laqué de 40 mm d'épaisseur ; Ressorts galvanisés avec une durabilité de 20 000 cycles ; Etanchéité et isolation thermique et acoustique ; Entretien facile et réduit ; Gouttières galvanisées de 2 mm.

Büsten von Stoffpuppen ohne Köpfe und mit beweglichen Holzarmen sind ideal, um Ihr Image und Ihre trendigsten Kleidungsstücke zu bewerben. Auch ohne Kleidung eignet sich diese Büste perfekt, um Ihre Accessoires wie Handtaschen, Schmuck oder Schals zu präsentieren. Unsere genähten Büsten lassen sich leicht in die Gestaltung Ihres Geschäfts integrieren. Verschiedene Stoffe und Designs sind für diese maßgeschneiderte Büste erhältlich, mit der Sie Ihre neuesten Kollektionen in Ihren Geschäften, Showrooms und Schaufenstern präsentieren können.

Palace ALUFACE

Profilo sistema porta con isolamento termico profilo a 3 camere profondità degli elementi: telaio 60 mm, anta 60 mm soglia in HPVC e guarnizioni EPDM garantiscono un buon isolamento termico delle ante e la penetrazione di acqua e aria basso valore del coefficiente di scambio termico grazie all'utilizzo di separatori termici e guarnizioni possibilità di piegatura dei profili tagli termici profilati a forma di omega da 14mm la forma dei distanziatori aumenta la rigidità dei profili e facilita il drenaggio delle sezioni

In glass railing solutions, it holds the glass on the ground from multiple points with its reliable and healthy connections made of aluminum profile and offers decorative alternatives at the record level. It can be applied in glass thicknesses of 17.5 mm, 21.5 mm and 16 mm.

The ADD ON system, which allows the carrier profiles to be made of steel at points where the openings allowed by the aluminum horizontal and vertical carrier profiles in the facade systems are not sufficient for the projects, can offer more transparent surfaces to designers. It is a system that can be used in projects made with steel construction, which has more load-bearing properties, instead of deep aluminum profiles, in large spaces where large openings must be crossed at once, such as airports and auto showrooms. The system, where the system depth is shaped by steel and glass combinations used in the standard FS 50 system can also be used, is preferred by designers due to its high inertia values. The system consists of aluminum profiles with a wall thickness between 1.8 mm and 2.0 mm combined with steel profiles selected for the facade. System Visible Width:50 mm System Depth:Shaped by the steel to be used Applicable Glass Thickness:6 – 52 mm