Termékek acél bár (186)

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

GEDREHT ODER GESCHÄLT Rundstahlstäbe TOLERANZ Dicke:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE fein geschält, gedreht:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 835N/mm² (260HB max.) Farbcode:1.2767 BRAUN Erzielbare Härte:Hrc 54 - 58

An innovative technological process carried out on specialized machines allowed for the extension of the current offer with products exceeding the requirements of the applicable European standards. The innovative production of the bars allows cost reduction of further processing, thanks to the increased geometric accuracy and ready-to-use surface. Modern production and control methods allow achieving significantly higher product characteristics: Surface quality – up to class 4 Cross-sectional dimension of a bar within the assumed tolerance – along its entire length Roundness deviation – max level 0.0261 (IT / 3) Precise length – tolerance up to 5 mm Straightness of bars – up to 0.3 mm / m No surface decarburization

Wir bieten hochwertigen U-Baustahl S235JR, verzinkt, ideal für verschiedene Bau- und Konstruktionsanwendungen. Dieser Stahl überzeugt durch seine hervorragenden mechanischen Eigenschaften und Korrosionsbeständigkeit dank der Verzinkung. Eigenschaften: Material: S235JR (stumpfschweißbar, mittlere Festigkeit) Oberfläche: Verzinkt für optimalen Schutz gegen Rost und Witterungseinflüsse Anwendungsbereiche: Maschinenbau, Stahlbau, Konstruktionen im Außenbereich und mehr Maße: Individuelle Längen und Querschnitte auf Anfrage Der U-Baustahl eignet sich hervorragend für tragende Strukturen und ist in verschiedenen Längen erhältlich. Profitieren Sie von der Langlebigkeit und Robustheit unseres Produkts. Für weitere Informationen oder eine persönliche Beratung stehen wir Ihnen gerne zur Verfügung! Höhe:35 Breite:40 Länge:6

It is the quality with the best malleability feature among the austenitics. Its malleability capability is around 78% and it is named as the automat of stainless steel. Although the sulfur (S) addition improves its malleability, it also reduces corrosion resistance (lower than 304) and weakens its formability, it is especially not suitable for straight bending. Despite sulfur, its toughness degree is the same as 304.

200 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm. Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Wide range of forging ingots for the following markets: Oil & Gas: Flanges, Valve Bodies, Valve Balls, Shells, BOPs, Spool Bodies, Pipes and Wind Power Generation Available in the following grades: Case Hardening Steel, Heat Treatable Steel, Creep Resistant Steel, Martensitic Stainless Steel, Ball & Roller Bearing Steel, Tool Steel, Alloy Steel, Nitriding Steel.

Bar magnet AlNiCo, steel body - with threaded neck Article number:S6AGvM3x7 D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 Thread MxL:M3x7 Force* N:Weight g Weight g:4.5 Temperature °C:450

7191 STAINLESS STEEL DISABLE GRAB HANDLE 100CM - Handle Bars

These parts are used for printer accessories.

solidian REBARs are combining highstrength fibers with extremely resistant resins in the production process named pultrusion. Here carbon or glass fibers are oriented extremely straight, impregnated by resin and hardened. solidian REBARs are realizing unbelievable high and durable loadbearing capacities up to most extreme demands. This is the result of the combination of the straightness of the fibers and the selectable big diameters of the crosssection. As such solidian REBARs are accessible onsite. So they are the ideal noncorrosive substitution for metallic reinforcements for everybody who is interested in economical and ecological sustainability. corrosionresistant thinner concrete cover, longer service life, lower refurbishment costs reduced weight with higher tensile strength high tensile strength lower overall construction costs Material:Carbon Fiber width:dia 4mm

As Tampas Série Ligeira c/ Aba c/ Rebaixe de 50mm em Aço Inox são projetadas para oferecer durabilidade e resistência em ambientes exigentes. Fabricadas em chapa INOX AISI 304/316 com 2 mm de espessura, essas tampas garantem uma vedação hidráulica eficaz, evitando a passagem de odores indesejados. O design icônico facilita a abertura, enquanto a pega central permite um içamento seguro e prático. Ideal para zonas pedonais e silos de estacionamento, estas tampas são perfeitas para locais que requerem proteção contra corrosão e um acabamento estético em betão, ladrilho e calçada.

We are passionate about innovation, universality and creating comfortable innovative products. We add to this passion the craftsmanship in its DNA and the agility in the design and production process to offer the aesthetic forms of dreams to the needs. This process is motivated by the goal of creating products that appeal to different tastes and synthesize comfort, aesthetics and ergonomics. Buen has been producing high quality mobile furniture for the projects of chain and boutique brands in the hospitality sector for many years with its attention to detail in design and production. In addition to more than a thousand product types, Buen prepares project-specific design products together with designers in many countries. Who Are We: Steeling.Net carries out partner marketing activities in the Turkish metal industry. Our partner manufacturers are companies that specialize in sheet and steel processing and have a wide product range.

Konstruktionsbauteile aus CFC Platten, Stäbe, Schrauben, Muttern, M5 bis M30 aus kohlenfaserverstärkten Kohlenstoff

FSA-Qualität: Unsere Edelstahlmagnetventile mit Viton Dichtung eignen sich ideal für Pools, Salzwasser und Schiffsbau. Vielseitig einsetzbar wie Messing oder Kunststoff. Anschluss: Im Lieferumfang ist eine ausführliche Anleitung enthalten. Weitere Informationen zum Anschluss sind im unteren Abschnitt verfügbar. Funktion: Elektromagnetisches Feld bewegt den Hubanker je nach Wicklung des Magnetkopfes. Vorteil Magnetventil: Hohe Schaltzyklen (bis zu 500.000), schnelles Schalten (10 ms) und platzsparende Bauweise. Bitte Beachten: Das Magnetventil wird sehr Heiß im Einsatz bis zu 80°C. 100% Einschaltdauer ist möglich. Technische Daten:E-1-230-O Temperatur:-30° bis 150° C Gewinde:G-Gewinde Druck:8,0 bar Kv-Wert / Cv-Wert:10,28 / 12,00 Leistung der Spule:40 W Gewicht:1.454 g Öffnungsquerschnitt:25,0 mm Schutzklasse:IP65 Dichtung:Viton Schaltzyklen:500.000

Rinfor Grout Col is a special cementitious formulation, being fibre-reinforced with READYMESH technology, enriched with reactive microsilicates with very high pozzolanic activity and special crystalliser additives that increase the end result and the durability. Mixed with water, it is able to forge micro-concretes with pourable rheology. Once hardened, the product offers exceptional physical-mechanical and ductility values. Ideal for the reinforcement and seismic adaptation of flooring in reinforced concrete, brick-concrete or corrugated sheeting or wood, by constructing a thin extradoxal structural screed along with beams, pillars, structural crosspoints and walls, by means of suitable liners. The rheological and physical-mechanical characteristics of the Rinfor Grout Col product render it extraordinarily effective in reinforcing structural elements in reinforced concrete and masonry. Adhered to the inside of caissons, confined within cavities or spread out over the extrados of foundations and lofts, Rinfor Grout Col allows for low thickness structural reinforcing, substantially devoid of additional metallic reinforcement. Rinfor Grout Col belongs to the HPFRC (High Performance Fibre Reinforced Concrete) family, permitting the structural designer to make use of the following characteristics: - Exceptional resistance and traction as well as exceptional values of shear stress adhesion on various supports which have been suitably roughened; - advantages in structural calculations prescribed for fracture mechanics, resistance to traction and of the ultimate material deformation; - minimum thicknesses applied with reinforcing effects which have been distinctly improved as against interventions with traditional reinforced concrete; - highly notable reduction of mass and minimizing of additional loads applied for structural reinforcing as against interventions with traditional reinforced concrete (practically nil additional loads in the case of the thickness of the coating corresponding with the depth of sacrificed surface); - anti-carbonatation barrier (practically zero penetration of CO2) and anti-oxidant barrier; - auto-healing of any micro-fissures exposed to contact with fluids, thanks to the particular crystallising additives; - increment of durability of the structures repaired with Rinfor Grout Col, thanks to the migration effect of the crystallising additives; - very high resistance to fire; - eco-sustainability - made up of 100% mineral and metallic materials, totally recyclable at end of life. From the environmental point of view, the Rinfor Grout Col product is characterised by the following advantages: - Ecological packaging (card-cardboard) - product based on hydraulic binders, selected aggregates and mineral additives with content of organic raw materials < 1% - practically nil VOC emissions during installation; once hardened, nil VOC emissions. - containing a fraction > 5% of sub-products from the production industry 100% recyclable at end of life. For seismic adaptation with absorption and transfer of pressure or traction during events with elevated dynamic forces (seismic, impacts, deflagration); - for structural reinforcing and seismic upgrading through coating of beams, pillars structural ties, walls; - for reinforcing and seismic upgrading with external, low thickness, structural screed for lofts in reinforced concrete, concrete masonry, corrugated sheeting, wood;
 - for fabrication of light, thin section, structural elements
; - for the repair of flooring with need for resistance against elevated static and dynamic stresses, together with exceptional values of resilience and resistance to impacts; - for reinforcing and precision anchoring of heavy and highly stressed machinery: E.g. wind turbines, turbines, precision machinery, etc. The support must be in good condition, clean, sufficiently coarse, without crumbling parts or dust, pressure washed and saturated with water before application. With concrete, the abrasiveness of the support must be > 3mm; to obtain this level of coarseness, techniques of hydro-scarifying, bush-hammering, mechanical chiselling, sand blasting with large grain may be considered. With the case of surfaces in strongly absorbent brick-work (lofts in brick cement with surfacing of parts in brick) or in the case in which it is impossible to saturate the support with water, contact our technical services to evaluate suitable adhesion primers, such as Syntech Pavisheer or Syntech RGS. Above all, when used as a surface covering of lofts in concrete, or as a repair to industrial flooring, providing anchoring roots by drilling the support is particularly useful for increasing resistance to cuts and adhesion to the support (diameter 18-20 mm, depth 20 mm), and accurately cleaning the surfaces of the holes before spreading the Rinfor Grout Col.

Ming Xiao Manufacturing Co., Ltd engaged in Small Turning Parts manufacuring more than 20years, we have old lathe turning machines, automatic turning machines, and High precision CNC turning machines, Turning & Milling Compound Machines. We can optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use CNC turning machine, and low toleracne requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce. As a professional small turning parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turned parts,Copper & Brass turned parts,Aluminum Turned Parts & Machined parts, such as tube coupling, hose coupling, shaft, pipe joint parts, hose connectors & transition connectors, copper machined tube, flange,bushing, knighthead, pedestal, Piston Rod, insert long pin, Dowel Pin, Drive Pin & Rod,ball head bolt, long rod machined parts, long thread tube parts

Seamless stainless steel pipes and hollow bars are designed for applications requiring high strength and durability. These products are available in various steel grades, including TP304, TP316, and TP321, ensuring compatibility with different environmental conditions and performance requirements. The seamless construction ensures a smooth surface finish, reducing the risk of contamination and ensuring efficient fluid flow. These pipes and hollow bars are ideal for use in industries such as oil and gas, chemical processing, and construction, where strength and reliability are paramount. Their corrosion-resistant properties make them suitable for use in harsh conditions, reducing maintenance costs and downtime. With a range of sizes and thicknesses available, seamless stainless steel pipes and hollow bars can be customized to meet the specific needs of any project, ensuring superior performance and longevity.

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

- Einbauspülbecken, genormt, Maße: 250x95 mm - Portionierer Dusche - ohne Wandaufhängung - inkl. Wannenbodenverstärkung Portioniererspüle, Einbaumodell bestehend aus - Einbauspülbecken, genormt - Ausschnittmaß 250 x 95 mm - Portionierer Dusche, regelbar - Überlaufrohr - exkl. Lochblecheinsatz - hochwertiger Edelstahl - Abklopfleiste, orange - Einbaumodell - inkl. Wannenbodenverstärkung Technische Daten: - benötigter Wasserdruck: 1-4 bar - Wasseranschluss aufschraubbar 3/8 Zoll - Maße: 270 x 110 x 115 mm Gewicht:2,3 kg Herkunftsland:Deutschland Hersteller:Geppetto Eis

Measurement - PRODUCTION PROCESSES

complex geometry turning parts high accuracy

GEDREHT ODER GESCHÄLT Rundstahlstäbe TOLERANZ Dicke:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE fein geschält, gedreht:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 745N/mm² (220HB max.) Farbcode:1.2162 BLAU Erzielbare Härte:Hrc 62

GEDREHT ODER GESCHÄLT Rundstahlstäbe TOLERANZ Dicke:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE fein geschält, gedreht:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 840N/mm² (260HB max.) Farbcode:1.3343 SILBER-BLAU Erzielbare Härte:Hrc 64 - 65

PRÄZISIONSGESCHLIFFEN Rundstahlstäbe TOLERANZ Dicke:h8 TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE geschliffen:N7 Ra 1.6 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 840N/mm² (260HB max.) Farbcode:1.3343 SILBER-BLAU Erzielbare Härte:Hrc 64 - 65

GEDREHT ODER GESCHÄLT Rundstahlstäbe TOLERANZ Dicke:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE fein geschält, gedreht:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 790N/mm² (235HB max.) Farbcode:1.2343 SCHWARZ Erzielbare Härte:Hrc 52- 54

GEDREHT ODER GESCHÄLT Rundstahlstäbe TOLERANZ Dicke:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE fein geschält, gedreht:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 9000N/mm² (265HB max.) Farbcode:1.4112ROSA Erzielbare Härte:Hrc 59

GEDREHT ODER GESCHÄLT Rundstahlstäbe TOLERANZ Dicke:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE fein geschält, gedreht:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 640N/mm² (190HB max.) Farbcode:1.1730 ROT Erzielbare Härte:Hrc 56-57

Der QUADDRATROHR 2S35 JRH VERZINKT ist ein hochwertiges Vierkantrohr aus Stahl, das durch ein spezielles Verzinkungsverfahren besonders korrosionsbeständig gemacht wurde. Mit seiner robusten Bauweise eignet sich das Rohr ideal für Anwendungen im Außenbereich, wo es extremen Witterungsbedingungen standhalten muss. Es vereint hohe Festigkeit und Langlebigkeit und ist somit eine zuverlässige Wahl für Bau- und Konstruktionsprojekte. In diesem Produkt stellen wir zur Verfügung Länge:6 Höhe:20 Breite:20

Das Stahlbauhohlprofil Quadrastrisch HN 6M ist ein hochleistungsfähiges Profil, das sich durch seine quadratische Form und außergewöhnliche Stabilität auszeichnet. Mit einer Länge von 6 Metern eignet es sich hervorragend für anspruchsvolle Bau- und Konstruktionsprojekte. Durch die präzise Verarbeitung und hohe Materialqualität bietet es eine ausgezeichnete Tragfähigkeit und Haltbarkeit. Das Hohlprofil ist ideal für Anwendungen, bei denen eine starke und gleichzeitig leichte Struktur gefordert ist, und wird häufig im Stahlbau, Maschinenbau und in der Industrie eingesetzt. In diesem Produkt stellen wir zur Verfügung Länge:3 Höhe:80 Breite:80