Termékek acélunk (269)

The pressure transmitter type DMP 333 has been especially designed for use in hydraulic applications with high static and dynamic pressure. The transmitter is characterized by an excellent long term stability, also under fast changing pressure as well as positive and negative pressure peaks. The modular concept of the device allows to combine different stainless steel sensors and electronic modules with a variety of electrical and mechanical versions.Thus a diversity of variations is created, meeting almost all requirements in hydraulic applications. Features: — nominal pressure: 0 ... 100 bar up to 0 ... 600 bar — accuracy:0.35 % (opt. 0.25 % / 0,1%) FSO — excellent long term stability, also with high dynamic pressure loads — insensitive to pressure peaks — high overpressure capability Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — SIL 2 version according to IEC 61508 / IEC 61511

SPIROL specializes in the custom manufacturing of tightly toleranced Precision Shims, Specialty Washers and Thin Spacers. SPIROL produces Shims custom-made to customer specifications in thicknesses ranging from 0.02mm up to 9.5mm (.001" up to .375") using a variety of stamping methods, machining processes and laser technology to meet your specific lead time and total cost considerations. Whether a project is for prototype, short run or long-term requirements, SPIROL has a solution to minimize costs by controlling - or even eliminating - tooling costs. In addition to having flexibility in our primary operations, SPIROL also performs most secondary processes in-house including heat treating, grinding, lapping, high speed polishing deburring, finishing and passivation.

The electronic pressure switch DS 210 is the successful combination of — intelligent pressure switch — digital display and has been specially designed for measuring of very small overpressure and for vacuum applications. Permissible media are gases, pressurized air and thin non aggressive media. As standard the DS 210 offers a PNP-contact and a rotable display module. Additional features like e.g. an intrinsically safe version, max. 4 contacts and an analogue output complete the profile. Features: — nominal pressure: 0 ... 10 mbar up to 0 ... 1 bar and vacuum -1 ... 0 bar — accuracy: 0.25 % / 0.35 % FSO — indication of measured values on a 4-digit LED display — rotatable and configurable display module — 1, 2 or 4 independent PNP contacts, freely configurable Optional Features: — IS-Version Ex ia = intrinsically safe for gases — customer specific versions

Vanne à trois voies à commande pneumatique en acier inoxydable pour fluides neutres et agressifs et pour des capacité de commutations élevée. Versions Fonctions de régulation différentes comme la fonction distributrice et mélangeuse Version basse température Version sans huile, graisse silicone ou PTFE Taille::DN 15 - DN 50 Pression::PN 40 Matériau::Acier inox 1.4408 Température::-30 °C - 200°C Raccords::Taraudage whitworth; Taraudage NPT; Raccordement extrémité; Raccordement tri-clamp; Formes spéciales Accessoires::Interrupteur de fin de course; Electro-vanne de pilotage; Commande manuelle en cas d'urgence Autres modèles de commande::Actionneur à piston en : Laiton (chromé), Inox, Plastique; Actionneur à diaphragme en acier inox Application::Gaz, vapeurs, liquides

This exceptionally versatile tool is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The Model PM Manual Pin Inserter easily accommodates quick change-overs. The part holding device (fixture) is simply replaced from the base of the machine. The pin diameter is easily changed, positive pin depth easily adjusted, and part size variation easily accommodated. The use of high-tech shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model PM Manual Pin Inserter installs pins ranging in diameter from 0.8mm-4mm (.031”-.156”) with a maximum insertion force of 0.9 kN (200 lbs).

Disc Springs are conically-shaped precision components designed to be axially loaded. Disc Springs are often incorrectly referred to as belleville disc springs, belleville springs, belleville washers or simply conical washers. SPIROL offers the full range of DIN EN 16983 (formerly DIN 2093) Group 1 and 2 Disc Springs in Series A, B, and C. In addition to the DIN specified sizes, SPIROL stocks its own standard sizes with outside diameters ranging from Ø8mm to Ø200mm. SPIROL Standard Disc Springs were designed around the standardized calculations of DIN EN 16984 (formerly DIN 2092), and meet all material, dimensional tolerance, and quality specifications as laid out in DIN EN 16983 (formerly DIN 2093) yet offer an expansion in the diameter and thickness combinations that are not included in the DIN standard. Standard materials include carbon steel and alloy steel, both finished with a protective coating of zinc phosphate and oil.

In addition to SPIROL Standard Metric Slotted Spring Pins, SPIROL offers a line of ISO 8752 Slotted Pins to meet market demand for these pins. SPIROL offers Slotted Spring Pins manufactured to the ISO 8752 specification in diameters ranging from 2mm to 12mm in both high carbon steel and austenitic stainless steel in plain finish. ISO 8752 Slotted Pins are not available with supplemental coatings such as zinc plating or passivation due to their propensity to interlock during the finishing process.

Pneumatic right angle valve for high cycle applications and compact installations. In stainless steel suitable for neutral and aggressive media but also for a wide range of temperature applications. Whitworth pipe thread NPT thread Limit switch Pilot valve Manual override . . . Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Degreased version, Silicon or PTFEfree version … Size:DN 15 - DN 50 Pressure:PN 40 Material:Stainless steel 1.4408 Media temperature:-30°C to +200°C Application:Gases, vapours, fluids

SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!

SPIROL's Series LP500 Latch Pins for Plastics are designed with a barb located under the head with a barb length equal to the width of the outermost section of the assembly. The remaining length of the LP500 Latch Pin is smooth without any other retention features. This allows the LP500 Latch Pin for Plastic to easily align and freely install through all of the holes with a plastic assembly until the barb makes contact with the final hole to securely lock the pin in place. Once fully installed, the handle will pivot freely around the non-barbed end of the stationary pin. The head prevents the LP500 Latch Pin from being over-installed, and enables the pin to be mechanically oriented for automatic installation. Manufactured from lightweight, lead free aluminium, SPIROL's LP500 Latch Pins for Plastics are available in three standard diameters: 3mm, 4mm and 5mm. Standard Material:Lead Free Aluminium Standard Diameters:3mm, 4mm, & 5mm

SPIROL’s GD100 Ground Hollow Dowels are designed to be direct replacements for Ground Solid Dowels manufactured per ISO 8734 when used in alignment applications. This innovative product is manufactured from strip steel, and then OD ground to achieve extremely tight diameter tolerances that enable critical alignment up to 20µm. The main advantage of the GD100 Ground Hollow Dowel is its ability to achieve the same alignment as the Ground Solid Dowel with a significant reduction in cost due to its hollow construction. In most scenarios, the Ground Hollow Dowel is approximately 50% lighter and at least 30% less expensive than the solid equivalent. If installation equipment is required, SPIROL also offers a standard comprehensive line of Installation Equipment from manual to fully automatic modules, with or without out fixturing, to support your assembly requirements.

Designed to install virtually any type of Heat / Ultrasonic Style Insert. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HM Manual Insert Driver has been designed to eliminate the dependency on the operator to control these factors. The result is nearly perfect flow of the plastic for optimal retention and performance. The Model HM Manual Insert Driver is simple to operate and easily adjustable. The Model HM installs Inserts ranging in size from M2 - M6 metric threads and #2 - 1/4 unified threads, and the simple up-down adjustment of the machine makes it easy to accommodate various sized plastic components.

SPIROL offers Disc Springs pre-stacked in custom configurations (greased or ungreased) packaged in shrink wrap with a perforated tab for ease of insertion into the assembly. The Pre-Stacked Disc Springs are delivered intact which saves time, mistake-proofs the assembly process, and eliminates the mess associated with greasing the stack. Have an existing Pre-Stacked Disc Springs Application? If you have an existing Disc Spring Stack that you would like quoted, please Request a Quote. We are here to help!

SPIROL's Barbed Pins were created specifically for use in flexible plastics where optimum resistance to axial force is desired. The raised barbs are angled backwards, opposite the direction of insertion. After installation, the plastic will backfill into the area around the barbs resulting in maximum retention. Barbed Pins are ideal for applications requiring high pull-out (tensile) strength, and to prevent disassembly (i.e. tamperproof ). Barbs are not appropriate for brittle plastics or those containing high percentages of fillers. As barbs are a radial feature, they do not resist rotation of two components relative to one another. For this requirement, a straight or helical knurl should be used. All Barbed Pins are provided with a generous pilot to facilitate alignment with the hole and ease installation.

To fasten components to profiles, brakes the anodized coat of the profile - thus ensuring a safe, electrically conductive connection Material: — Steel — Stainless steel — Plastic PA Measures: Thread: M4 - M8 length hammer screw: 16-60 mm many different versions in lengths and widths in the delivery assortment individual designs on request extras: Rotation aid: polyamide spot coating on request surface: with dry sliding film, zinc-nickel or zinc-flake coating on request Note: Matching flange nut available Models:Slot 8 / Slot 10

SPIROL offers a line of light duty and heavy duty Pin Driving Chucks designed to be used in SPIROL’s Manual Pin Inserters (Model PM, Model PMH or Model PMX). A Pin Driving Chuck may also be used in a drill press or arbor press with an adaptor. All Pin Driving Chucks are designed with spring tension at the tip to hold the pin securely in place prior to and during installation. The exposed end of the pin is then placed into the hole and the tool is advanced to complete the installation. The tools are supplied with a flush, above-flush or below-flush setting, depending on the application requirements.

SPIROL manufactures several different styles of Post Mould Installed Compression Limiters for installation into the plastic component after the molding process is complete. Installing Compression Limiters after the plastic has cooled typically results in the lowest total installed cost since there is no added cycle time associated with placing the Compression Limiters over core pins during the moulding process. Post mould installed Compression Limiters also eliminate any concern with damaging the mould due to improperly positioned components. SPIROL Standard Post Mould Compression Limiters include: The Series CL220 Split Seam, Series CL200 Split Seam - Slim Profile, Series CL350 Split Seam - Heavy Wall, Series CL400 Split Seam - Oval, Series CL6000, CL6100 & CL620 Aluminium and Series CL8000 & CL8100 Brass.

The digital pressure gauge DL01 is a precision device fulfilling highest demands. It was conceived especially for leak testing or pipeline monitoring. The advantage of the DL01 is that it consists of two devices - the digital display and the pressure transmitter -which can be combined without any tools. Outstanding measuring qualities, an intuitive operation, as well as an integrated data logger characterize the DL01. In addition, the graphic display provides the handling and the clear presentation of the measuring procedure. Features: — nominal pressure: 0 …100 mbar up to 0 ... 400 bar — modular sensor concept — data logger — graphics-capable display — stainless steel housing d = 100 mm — communication interface USB 2.0 Optional Features: — data logger interval 1s ... 99 days or fixed time — default values for time / test duration — zero point calibration

QuellTech Solution For this purpose, QuellTech offers a perfectly tailored seam tracking solution, which is based on a QuellTech 2D-Laserline Sensor of the Q4 family. The method consists in measurement of the real position and width immediately ahead of the welding process. The laser sensor captures the real dimension of the weld bead, and the software used for this process simultaneously sends the nominal position to the robot. The robot performs a correction movement in X or Z position according to this measurement. This way not only the deviation caused by tolerances, but also the warping effect can be compensated – and the weldment takes place exactly at the required position. The QuellTech 2D-Laserline Sensor is specially prepared to the highly disturbing ambient light from the weld process. It can be cooled and protected from weld spatter, so this model proves to be particularly adequate for operation in the harsh environment of the welding process. Country of origin:Germany X-Measuring Range from 4,5 to 650 mm:Z-Measuring range (Height) from 5,9 to 1000 mm Integration benefit:compact housing shape

Pneumatisch betätigtes Dreiwegeventil in Edelstahlausführung für neutrale und aggressive Medien und hohe Schaltleistungen. Antriebsvarianten: Kolbenantrieb aus- Messing (verchromt)- Edelstahl- KunststoffEdelstahl-Membranantrieb Ausführungen: Unterschiedliche Steuerfunktion z.B.: Aufteil- und Mischfunktion; TieftemperaturausführungÖl-, Fett-, Silikon- oder PTFE-freie Ausführungen… Nennweite:DN 15 - DN 50 Nenndruck:PN 40 Werkstoffe:Edelstahl 1.4408 Temperatur:-100°C bis +220°C Anschlüsse:"Whitworth-Rohrgewinde; NPT-Gewinde" Zubehör:Endlagenschalter; Pilotventil; Handnotbetätigung; . . . Anwendung:Gase, Dämpfe, Flüssigkeiten

SPIROL offers a line of austenitic stainless steel Disc Springs in diameters ranging from Ø8mm to Ø71mm. Austenitic stainless steel is typically used for static and low cycle applications that require a heightened level of corrosion resistance. It withstands fresh water and atmospheric marine conditions very well, and is suitable for many other industrial conditions including acidic environments. This material will continue to work harden with use so cycle life is limited, but creep resistance is good. SPIROL supplies both single Disc Springs as well as Pre-Stacked Disc Springs in custom configurations, packaged in shrink wrap with a perforated tab for easy of assembly.

SPIROL ofrece una línea de Resortes de Platillo de acero inoxidable austenítico en diámetros que van desde Ø8 mm hasta Ø71 mm. El acero inoxidable austenítico se utiliza normalmente para aplicaciones estáticas y de bajo ciclo que requieren un mayor nivel de resistencia a la corrosión. Soporta muy bien el agua dulce y las condiciones atmosféricas marinas, y es adecuado para muchas otras condiciones industriales, incluidos los entornos ácidos. Este material seguirá templándose con el uso, por lo que la vida útil es limitada, pero la resistencia a la fluencia es buena. SPIROL suministra tanto Resortes de Platillo individuales como Resortes de Platillo preapilados en configuraciones personalizadas, empaquetados en papel retráctil con una pestaña perforada para facilitar el ensamble.

The industrial pressure transmitter DMP 334 has been especially designed for use in hydraulic systems up to 2200 bar. The base element of DMP 334 is a thinfilm sensor, that is welded with the pressure port and meets high demands of foolproofness and reliability. All of characteristics and the excellent mesurement data of DMP 334 as well as distinguished offset stability offer a pressure transmiter with easy handling, reliability and robustness for hydraulic user. The DMP 334 is deliverable with pressure ports of extrem pressure technics. Features: — nominal pressure: 0 ... 600 bar up to 0 ... 2.200 bar — accuracy: 0.35 % FSO — pressure sensor welded — extremly robust and excellent longterm stability Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — pressure port M20 x 1.5 oder 9/16 UNF — adjustability of span and offset — different kinds of electrical connections

The SPIROL Model HP Pneumatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HP Pneumatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HP Pneumatic Heat Insert Driver installs Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads.

A fuel injection systems manufacturer used two steel brackets to clamp the fuel rail to the top of the engine. The customer was looking at changing these brackets to plastic to reduce costs. In order to prevent deformation of the plastic bracket during the tightening of the bolt, a Compression Limiter was required. The customer originally investigated the use of a machined Compression Limiter, but the savings from changing the metal bracket to plastic would have been lost considering the high price of the machined Limiter. The customer approached SPIROL to help provide a lower cost solution for the Compression Limiter. SPIROL recommended the use of a standard CL200 Compression Limiter based on the rated proof load of the bolt used in the assembly. This roll-formed Compression Limiter is a fraction of the cost of a machined Compression Limiter. In addition, the flexibility of the roll formed Limiter enabled the customer to widen their hole tolerances further reducing assembly costs.

Robust stainless steel check valve with high flow capacity for aggressive media and high operating temperatures. Size:DN 10 - DN 80 Pressure:PN 40 Body:Stainless steel 1.4408 Interior parts:Stainless steel 1.4571 / 1.4310 Media temperature:-30 °C up to +200 °C Application:Gases, vapours, fluids Versions:Cracking/lifting pressure 0,2 bar, optionally 0,1 bar Perm. differential pressure:40 bar Opening pressure:0,2 bar

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & AlSn20Cu | Low-maintenance | DIN 1494 / ISO 3547 For high sliding speeds, optimum sliding behaviour with good lubricant supply. BIV-MET®/A is a composite sliding bearing requiring maintenance; oil or grease lubrication is needed. For technical details, please visit the product page on our website! Support material/Carrier material:steel tin plated (1.0330) Sliding layer:AlSn20Cu Static load:≤ 100 N/mm² Dynamic load:≤ 700 N/mm² Sliding speed:≤ 25 m/s Friction value:0,08 up to 0,17 µ Temperature strain:-10 up to +200 °C Max. PV-value:6,0 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

DD11 - DD13, pickled - greased, EN 10029 S235JRG2, pickled - greased, EN 10025 S355MC, pickled - greased corrugated plates, S235 JRG2 bulb plates, S235 JRG2

• INP • UNP • IPE • HEA • HEB • HEM

Nahtlos EN 10255 Geschweißt EN 10255