Termékek acélunk (87)

rechteckiges Mannloch 225 x 175 mm horizontal mit Zentralbügel - H05-175-H-82 - Catalogue / Horizontale Öffnung- Typ H05 Referenz:H05-175-H-82 Grösse:225 x 175 Edelstahl:1.4404 / 1.4301 Zul. Betriebsdruck:+ 0,6 Kragen:50 x 6 Dichtungs Profil:Halbrund-Dichtung Dichtungen:EPDM

Fraise Speciale

Foret Special Ø67

Fraise Herisson Usinage Acier Mecanique De Precision

Tete Km Usinage Acier Mecanique De Precision

Outil Special Acier Mecanique De Precision

Tetes Capto Pour Usinage Inconel Aeronautique

Cone Sa 50 Support Capto Pour Tour Vertical

Runde Domdeckel für sterile Anwendungen Drucklose Domdeckel Profildichtung - Mannlöcher und Domdeckel

Sicherheitsgitter für aseptische Umgebung Das Zweistufenöffnungssystem (SY.M.O 2). Dieses kann auch nach Einbau der Öffnung noch nachträglich installiert werden, und dies ohne Schweisarbeiten! Unsere Federöffnungshilfe A.RE.M® (Directive MAchine) Schaugläser, nach DIN oder SMS, NaConnect, mit oder ohne Leuchte,...

Recommended for dirty, charged or diphasic fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application. Standard:DIN VDI / VDE 2041 Fluid:liquid, gas, steam Diameter of pipes:from 100 to 350 mm Accuracy:1.2% of max flow Repeatability of the measurement:0.1% Pressure taps:in the corners or at the flange Reynolds number in pipework:104 ≤ ReD ≤ 106 Pipe interior diameter:50 mm ≤ D ≤ 500 mm Orifice height:h ≥ 12,5 mm d/D:0.316 ≤ β ≤ 0.707 Upstream face roughness:Ra <10⁴.h Orifice thickness:0,005.D ≤ e ≤ 0,02.D Plate thickness:e ≤ E ≤ 0.05 D Downstream bevel angle if necessary:α = 45 ° ± 15 ° Flatness tolerance:t < 0,005.(D - h)/2

Pour Usinage Titane Creuzet Aero

Domdeckel DN220 mm Druck bis + 07 bar - H02-114-80 - Drucklose Domdeckel Referenz:H02-114-80 NW:220 Edelstahl:1.4404 / 1.4301 Zul. Betriebsdruck:- 0,8 / + 0,7 Kragen:60 x 8 Dichtungs profil:Halbrund-Dichtung Dichtungen:EPDM

Se référant à la norme ASTM A967, la passivation se produit habituellement naturellement sur les surfaces en acier inoxydable, mais il est nécessaire de soutenir le procédé avec des traitements chimiques. Dans le cadre d’une altération de la matière par action mécanique, marquage laser etc., la qualité et l’épaisseur de la couche passive se développent rapidement et sont optimisées pendant les traitements de passivation à l’acide. Aupus 967 A Passivant pour inox austénitiques Référentiel : ASTM A967 / RCCM F6000 Aupus 967 M Passivant pour inox martensitiques Référentiel : ASTM A967M Aupus 86 T Passivant pour les titanes Référentiel : ASTM F86 Ces produits répondent aux normes des secteurs suivants : industriel, médical, nucléaire.

Runde Domdeckel für sterile Anwendungen H01-S - H01-S - Runde Domdeckel für sterile Anwendungen

rechteckiges Mannloch 245 x 310 mm Vertikal mit Zentralbügel - H05-245-V-82 - Vertikale Öffnung - Typ H05 Referenz:H05-5245-V-82 Grösse:245 x 310 Edelstahl:1.4404 / 1.4301 Zul. Betriebsdruck:+ 0,4 Kragen:50 x 6 Dichtungs profil:Halbrund-Dichtung Dichtungen:EPDM

Ovale Mannlöcher Horizontale Öffnung - H04-407-80 - Mannlöcher und Domdeckel Referenz:H04-407-80 Grösse: 310x 445 Edelstahl:1.4404 / 1.4301 Zugl. Betriebsdruck:+ 0,1 kragenstärke:60 x 8 profil-Dichtungen:Halbrund-Dichtung Dichtungen:EPDM

Kragen in verscheiedenen Höhen lieferbar Kragen auf Tankradius angepasst Sicherheitsrost / Sicherheitskreuz

The venturi tube has a convergent inlet, a throat and a divergent outlet. It is a differential pressure flow meter well known to create a low permanent pressure drop; thus, it is suitable for measuring, for example, a low pressure flow rate. More over, it requires short upstream and downstream straight lengths. There are different types of venturi tubes : the machined venturi made from a solid round for small size parts, the rolled welded venturi made from sheet metal for larger pieces up to 1200 mm diameter and the venturi "as cast" allowing a better accuracy up to 800 mm diameter.

Sicherheitsgitter für aseptische Umgebung Das Zweistufenöffnungssystem (SY.M.O 2). Dieses kann auch nach Einbau der Öffnung noch nachträglich installiert werden, und dies ohne Schweisarbeiten! Unsere Federöffnungshilfe A.RE.M® (Directive MAchine) Schaugläser, nach DIN oder SMS, NaConnect, mit oder ohne Leuchte,...

rechteckiges Mannloch Vertikal mit zwei Bügel - H05-111-80 und H05-112-80 - Vertikale Öffnung - Typ H05

For a better precisionSolder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application. Standards:ISO 5167-1 & 4, ASME MFC-3M Fluid:liquid, gas, steam Accuracy:0.7% of max flow Repeatability of the measurement:0.1% d/D:0.30 ≤ β ≤ 0.75 Roughness at the throat:Ra ≤ 10⁴.d Roughness input and convergent cylinder:Ra ≤ 10⁴.D Minimum inlet cylinder length:l = D or (0.25.D + 250mm) Convergent input length:l' = 2,7.(D - d) Convergent angle of entry:α = 21 ° ± 1 ° Throat length:lc = d ± 0,03.d (minimum value = d/3) Diverging angle of exit:7° ≤ φ ≤ 15°

Recommended for low flow rates and / or viscous fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application. Standard:ISO / TR 15377 Fluid:liquid, gas, steam Diameter of pipes:from 25 to 500 mm Accuracy:2% of max flow Repeatability of the measurement:0.1% Pressure taps:in the corners Reynolds number in pipework:80 ≤ ReD ≤ 6.104 Pipe interior diameter:25 mm ≤ D < 500 mm Orifice diameter:d > 6 mm d/D:0.1 ≤ β ≤ 0.316 Upstream face roughness:Ra <10⁴.d Conical entry thickness:e1 = 0.084.d ± 0.003.d Cylindrical part thickness:e = 0,021.d ± 0,003.d Plate thickness:E ≤ 0.1.D Upstream bevel angle:α = 45 ° ± 15 ° Flatness tolerance:t < 0,005.(D - d - 2.e1)/2

Outil A Gorges Frontales

Oval 340 x 440 mm konischer Kragen - H03-340-80 - Ovale Mannlöcher- Typ H03 Referenz:H03-340-80 Grösse:340 x 440 Edelstahl:1.4404 / 1.4301 Zul. Betriebsdruck:+ 2 Kragen:100 x 3 Dichtungs profil:Profildichtung Dichtungen:EPDM

Fraise 3 Tailles Ø450 R10 Pour Usinage Titane

Orifices: dimensioned according to the fluid, the pressure drop or the flow to be achieved going through the restriction. Plate thickness: calculated taking into account the pressure drop generated by the plate and the diameter of the pipework in order to avoid a deformation of the plate. For more details, see our Frequently Asked Questions. Noise: the number of orifices is determined according to the level of noise not to be exceeded. The maximum noise level depends on the operating conditions: limited to 85 dB(A) by the regulatory body for an average daily exposure in continuous operation. Intermittent or emergency operation - acceptable upper values ​​(see corresponding regulations). If the noise level is still too high, it is possible to switch to a multi-stage restriction orifice. Cavitation: the cavitation level is checked for each plate and the orifices are calculated to avoid cavitation. For more information on cavitation, see our Frequently Asked Questions. Fluid:liquid, gas, steam Diameter of pipes:all sizes

Suitable for large steam flowsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation or solder connection (BW) Material: Standard: carbon steel, stainless steel, others according to your application. Standards:ISO 5167-1 & 3, ASME MFC-3M Fluid:liquid, gas, steam Accuracy:2% of max flow Repeatability of the measurement:0.1% Pressure points:D - D / 2 Diameter of pipes:from 50 to 500 mm Reynolds number in pipework:104 ≤ ReD ≤ 107 Pipe interior diameter:50 mm ≤ D ≤ 630 mm Upstream face and throat roughness:Ra <10⁴.d Length of the cylindrical throat:b n = 0.6.d Thickness:3 mm ≤ H ≤ 0,15.D

Economical solution thanks to the reduction of upstream and downstream straight lengthsStandard: Element designed on the basis of ISO 5167-1 & ISO 5167-2 or ASME FC-3M. Mounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application Fluid:liquid, gas, steam Diameter of pipes:from 25 to 1000 mm Accuracy:0.5% of max flow Repeatability of the measurement:0.1% Pressure taps:in the corners, at the flange Reynolds number in pipework:5 000 ≤ ReD ≤ 108 Inner diameter of pipe:25 mm ≤ D ≤ 1 000 mm Orifice height:d ≥ 6 mm d/D:0.2 ≤ β ≤ 0.65 Upstream face roughness:Ra <10⁴.d Sharp edge radius:r < 0,000 4.d Sharp edge orifice thickness:0,005.D ≤ e ≤ 0,02.D Plate thickness:e ≤ E ≤ 0.05 D Downstream bevel angle if needed:α = 45 ° ± 15 ° Flatness tolerance:t < 0,005.(D - d)/2

Runde Domdeckel für sterile Anwendungen Drucklose Domdeckel Profildichtung - Mannlöcher und Domdeckel