Termékek acélunk (60)

Prova A) - arma, canna manometrica cal. 5,56 x 45, cartuccia, SMI munita di proiettile blindato tipo FJ/PB/ SCP1 da 4,0 gr (SS109); - V 7,5 media dei proiettili 950m/sec; - E 7,5 media dei proiettili 1.85 Joule; Prova B) - arma, canna manometrica cal. 7,62x 51; - V 7,5 media dei proiettili, 843 m/sec; - E 7,5 media proiettili, 3.372 Joule. Peso totale piatto:2,100 Kg

Connessione diretta alla centrale. Elettronica resinata. Segnalazione acustica e luminosa. DGLP X Policarbonato. DGLI X Acciaio Inox. DGLP (L x W x D): 103 x 81 x 23mm. DGLP FN (L x W x D): 139 x 41 x 23mm. DGLI (L x W x D): 97 x 76 x 20mm. DGLIF (L x W x D): 140 x 35 x 21.5mm. Tecnologia: 125 kHz. Lettore Multi Cards. Montaggio da applicare (ideale porte a vetro). Il DFP è un bi-adesivo per nascondere il retro del lettore quando viene usato su porte a vetro. In questo modo si può utilizzare lo stesso lettore sia in Entrata che in Uscita. Alimentazione:12V dc Assorbimento:100mA

TABLETOP VACUUM PACKAGING MACHINE DZ 400 2T WITH TWO SEALING BARS Tabletop vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420x70/130(H) Vacuum pump:20 m³/h Working cycle:about 30 sec

Filtro in acciaio inox per maturatori da 200 a 400 kg. Filtro utilizzato per togliere le impurità del miele, è composto da un corpo in acciaio inox AISI 304 corredato di sacco filtro in nylon agganciato tramite un tondino d'acciaio sul corpo del filtro. Il filtro si adatta perfettamente al maturatore di 200 kg e può essere utilizzato anche sui maturatori da 400 kg grazie al supporto di acciaio inox. CARATTERISTICHE: Diametro del filtro 42 cm Diametro massimo con supporto 70 cm Altezza 28 cm MARCHIO Giordania Codice Prodotto:801

This unit was designed and built for protection of workstations mobile or permanent on the battlefield or in defense of sen- sitive targets, air-transportable as it is of limited weight and size. Aimed at the protection of operators armed. Front tilted 30 degrees with 8 mm x 70 mm slots suitable for hooking the side panels. Side panels dimensions 1000 x 1000 mm base 900 mm hypotenuse 970mm. Certification: Banco Nazionale di Prova per le Armi da Fuoco Portatili e per le Missioni Commerciali: - Prot. N°22/BAL-AG/vp February 23, 2010. Bullet ballistic resistors 5.56 x 45 SS109 + 7.62x51 Nato. Weight :88,00 kg Hooks:SNAP A BAYONET Color painting: NATO green RAL 6020, - RAL 1002, - other colors on request

Equipment consisting of a container structure and an armor system dissociated using high materials technology. Designed and built by Panisari Arms S.r.l. Approval performed at BANCO NAZIONALE DI PROVA of Gardone Val Trompia (Bs) Italy. Composed by: - N. 4 wheels, 2 fixed and 2 swiveling with block of safety - N. 2 steel bars of 10 mm for attachment to vehicles and handling - N. 1 lid for inspection. On the front side there are two nozzles, which allow you to insert any light weapon supplied to the police and the armed forces Weight: total 53,00 kg Colors: - standard green“NATO” RAL 6020 - blue RAL 5013 - blue RAL 5015 - or at the customer’s request weight :53,00 kg ballistic material:IN THE SHOOTING ROOM SNAP CLOSURE:security clock

Équipement composé d'une structure de conteneur et d'un système d'armure dissocié d'un système d'armure dissocié à l'aide d'une technologie technologie. Conçu et construit par Panisari Arms S.r.l. Approbation effectuée par BANCO NAZIONALE Composé de : - N. 4 roues, 2 fixes et 2 pivotantes avec bloc de sécurité - N. 2 barres d'acier de 10 mm pour la fixation aux véhicules et la manutention - N. 1 couvercle pour l'inspection. Sur la face avant se trouvent deux embouts qui permettent d'insérer n'importe quelle arme légère fournie à la police police et aux forces armées Poids : total 53,00 kg Couleurs : - vert standard « OTAN » RAL 6020 - bleu RAL 5013 - bleu RAL 5015 - ou à la demande du client POIDS:53,00 KG MATÉRIAU :ACIER GALVANISÉ CONTRE CORROSION MATÉRIEL BALISTIQUE:DANS LA SALLE DE TIR

FLG SERIES AUGER DOSING SYSTEM FOR POWDERS Vertical augervolumetric dosingfor non-sliding powdersuch as flour, cocoa, sugar, ground spices, coffee, finely ground, chemicals, premixedbuilding,ice creamor sorbet, etc. Capacity from 100 to 5000 ml - Rugged stainless steel with basic overview - Product loading hopper in stainlesssteel AISI304 with inspection hatch - Start with electric-operated pedal - Electrical panelwith PLC Example model:FLG-2000A Power :1200 W Packing Capacity :200-2000 ml Capacity :6-8 bags/min

1 frontal seal bar 400 mm, vacuum pump 20 m³/h. Also available with MAP - VACUUM PACKAGING MACHINE IN STAINLESS STEEL WITH TROLLEY Vacuum packaging machine with front sealing bar and stand on wheels, made of stainless steel (AISI 304), with digital panel and volumetric electronic sensor for the steady control of vacuum. Tank increased with concave bottom and convex cover for a working height of 230 mm in the central part. Vacuum pump 20 m³/h. It ensures a high productivity. Vacuum machines can be equipped with gas inlet system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of sealing bar:1 front Sealing bars length:mm 400 Vacuum pump:20 m³/h Work cycle:about 30 seconds Useful lenght:mm 420 Useful width:mm 500 Useful height (chamber + lid):mm 100/230

The series of mesh containers with tight mesh are suitable for the transport of products in supermarkets, department stores, laundries, hotels, etc. The mesh of the walls with dimensions mm. 50 x 50 prevents leakage of the product. Equipped with three or four walls bolted to the base and fixed to each other with clamps. STEEL BASE: Base wire and steel pipe complete with wheels polypropylene (2 fixed and 2 swivel) mm. 106x 40 mounted on bearings with roller cages (flow x wheel Kg. 150) Mesh of shoulder mm: 50x50 h Mesh of base mm: 56x107Soldering at 360 ° on the wires Tubes reinforced in the shoulders Thick materials more 'solicited 5 holes for drainage ROLL CONTAINER MESH 50x50 with 3 or 4 WALLS AVAILABLE IN: CP 04.A0 base 500 x 800 height 1800 mm CP 04.A6 base 600 x 600 height 1800 mm CP 04.A1 base 600 x 800 height 1800 mm CP 04.A2 base 700 x 800 height 1800 mm CP 04.A4 base 600x1200 height 1800 mm CP 04.A3 base 800x1200 height 1800 mm Example model:CP 04.A0 Capacity:Kg 600 Base:500x800 mm Shoulder mesh:mm. 50x50h Wheel type:Polypropylene 2 fixed and 2 swivel External dimensions:500x790x1785h mm Finish:Bright zinc chrome plating

Manual strapping tool for flat surfaces (sealless), easy and reliable to use in heavy industrial duty applications. Version equipped by steel made tension lever and rear feedwheel protection. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thickness up to 0.70 mm. The tightness of the seal depends on the material type and the strapping choice. Model:ST IMA G (13-16-19 mm) Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 7,0 Joint type:Sealless Weight:Kg 4,5

Leva in acciaio inox con sperone. Questo tipo di leva ha quattro funzioni: - Scalpello su un'estremità. - Gancio stacca favi sull'altra. - Sperone. - Foro per estrarre i chiodi. Codice Prodotto:211

Filtro estensibile in acciaio inox con pre-filtro a tutto diametro a maglia grossa. Ideale per secchielli da 25 kg e 40 kg. CARATTERISTICHE: Acciaio inox. Supporto estendibile fino a 42 cm. Diametro 24 cm. Altezza 10 cm. Codice Prodotto:818

Filtro in acciaio inox per maturatori da 50 a 200 kg. Filtro utilizzato per togliere le impurità del miele, è composto da un corpo in acciaio inox AISI 304 corredato di sacco filtro in nylon agganciato tramite un tondino d'acciaio sul corpo del filtro. Il filtro si adatta comodamente al maturatore di 50 kg e può essere utilizzato anche sui maturatori da 100 e 200 kg grazie al supporto di acciaio inox. CARATTERISTICHE: Diametro del filtro 30.5 cm Diametro massimo con supporto 39.5 cm Altezza 23 cm MARCA Giordan Codice Prodotto:802

Filo in acciaio inox 500 g adatto all'armatura dei telai da nido e da melario. Codice Prodotto:506

Costruito interamente in acciaio inox AISI 304, completo di manico, coperchio con pomello e rubinetto a taglio in plastica da 1' 1/2. Dimensioni interne: diametro 31 cm, altezza 28,5 cm. Codice Prodotto:418

Costruito interamente in acciaio inox AISI 304, completo di manico, coperchio con pomello. Senza foro per rubinetto. Posizione adatta sotto lo smielatore. Dimensioni interne: diametro 31 cm, altezza 28,5 cm. Codice Prodotto:417

Filo in acciaio inox 1 kg adatto all'armatura dei telai da nido e da melario. Codice Prodotto:526

Leva in acciaio inox con doppio scalpello, gancio e foro per estrarre il chiodo. Codice Prodotto:210

Coglilarva in acciaio inox con due punte di precisione di qualità professionale con una maniglia zigrinata per raccogliere in modo accurato e confortevole le larve delle api e 2 punte diverse. Codice Prodotto:902

Prefiltro in acciaio inox per maturatori da 50 a 200 kg. Da abbinare al filtro Giordan 50/200 kg per effettuare una doppia filtrazione del miele. E' costruito interamente in acciaio inox AISI 304 e ha una rete a maglia filtrante più larga in acciaio inox. CARATTERISTICHE: Diametro 35 cm Altezza 15 cm Codice Prodotto:808

Lettore di Prossimità Antivandalo in Acciaio per centraline DG502 e DGPROX. Progettati e costruiti per essere installati all’esterno e interno. Tutta l’elettronica è completamente resinata per garantire in qualunque condizioni atmosferica la sua funzionalità e affidabilità. La sua interfaccia permette di comunicare solo con i prodotti CDVI. DIGIPROX copyright è un marchio registrato a livello internazionale dalla società CDVI. DIGIPROX racchiude tutti i lettori di prossimità 125Khz e MIFARE progettati e prodotti dalla CDVI. Tutti i nostri prodotti sono garantiti per un periodo pari a 10 anni, questo rappresenta la massima qualità dei componenti e materiali utilizzati in produzione. Lettori e Tastiere Antivandalo in Acciaio Inox. Lettore di Prossimità, Tastiere antivandalo, Lettore Biometrico, Radio Ricevitore, Lettore a Lunga distanza Long Range, MIFARE. Alimentazione:12V dc Assorbimento:100mA

GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin. Capacity:12 cylinders Dimensions (LxPxH):mm. 1030x860x960 Finish:Hot-dip galvanizing

Manual steel strapping tool, lightweight and sturdy, with sealless joint. Suitable for medium/heavy duty packages with flat surface for supporting the tool. It can be also used on packages with irregular shape, however a flat surface with a minimum length 150 mm is needed. Works with glossy or blue strap mm. 13-16-19 with thickness max. 0.6 mm. The holding capacity of strap dipends on material type to strap and on strap choice Model:TP-SL 200 (13-16-19 mm) Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Sealless Weight:Kg 3,45

VOLUMETRIC DOSERS KFG SERIES with adjustable cups for powder and granular products Dispenser made entirely of AISI 304 stainless steel, suitable for packaging powder and granular products in preformed bags with volume from 125 to 2000 ml. (depending on the model) The cups are adjustable and indicatively the volume can be reduced to 50% of the maximum capacity. Main features: - sturdy support structure in stainless steel - 25 liter capacity loading hopper - adjustable cups - product discharge cone - start pedal for product unloading Example model:KFG-1000 Power (W):400 Capacity in volume (ml):500-1000 Speed (bags/min):8-12

Semi-automatic sealless steel strapping tool, with pneumatic tensioning and manual sealing of the strap. It requires a flat support surface with a minimum length of 200 mm. For use with glossy or blue strap from mm. 13 to mm. 19 with a maximum thickness of 0.60 mm. The holding capacity of strap dipends on material type to strap and on strap choice. Model:ST IMA DP Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,4 - 0,6 Joint type:Sealless Weight:Kg 5,3

Multifunction scales with fully stainless steel structure with degree of protection IP65, suitable for being used in humid environments. Equipped with waterproof keyboard immune to dust and splashes with diplay 18 mm LCD backlit 4-digit legible. The weighing plate measuring 210x210 mm and is easily washable. Power is supplied via external network power supply included or rechargeable batteries (not included). Weight about 3 kg. FUNCTIONS AVAILABLE: Tare M + weighted summation Total weighted MR Units External calibration AutoFF Signal Low Battery Example model:FPAGS6 Load :6 kg Standard division :0,2 g Division CE-M:2 g Dimensions :mm. 310x220x75h Autonomy:100 hours (80 with backlight)

PNEUMATIC SEALER SM 40 P - PLASTIC BAND Pneumatic sealer Mod. MINI SM 40 P, robust and safe, built entirely in painted steel suitable for closing polythene bags with clipband (plastic with double metal core). Also available with engraved date or ink date. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. Power supply machine:Pneumatic Air consumption:50 liters/minute Working pressure:6 bar Maximum speed of closing:30 pz./min Size flat clipband:Width 8 mm Thickness 0,6 - 0,8 mm Length 500 - 600 mt

The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with compressed air ensures a perfect seal on any type of material also very thick. The intake system with nozzles allows the use of any type of smooth or embossed envelope (NO BELLOW). The closure of the bars is through a dual button command (dual control security). When you have to pack flours or products that could make some dust, it is absolutely recommended to install the dust filter to avoid damaging the vacuum pump (main part of the machine) Similarly, we recommend installing the filter for liquids when you need to vacuum-pack products such as sauces or tomato purée. seal length:mm 800 Seal width:mm10 Max. film thickness:mm 0,20 Vacuum pump:20 m³/h Air compressed supply:6 bar Weldable materials:PE-PP-AL/PE

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake Description:Tiltable bucket 1000 liters Dimensions (mm) LxWxH:1190x1650x1080 Load:Kg. 800 Capacity:1000 Lt.