Termékek acélunk (60)

Lift height mm 1500/2000. Stainless steel version. Forklift with manual operation and battery-lifting, with aluminum upright to guarantee lightness and great maneuverability. The frame is made of AISI 304 stainless steel and the thermoformed ABS hood guarantees hygiene and safety in hazardous environments. Practical and handy it is very useful for lifting loads up to 100/200 kg to a height of mm. 1500 or 2000, depending on the model. Depending on the optional mounted, it can be used to lift boxes, moving coils or hook products with "GX hook". The low structure allows it to fit under standard pallets and reach reels or boxes positioned in the center of the pallet. It comes complete with two 12 V/40 Ah batteries. Example model:BIG 100/150 INOX Load:100 Kg Lifting height:1500 mm Riser height:1920 mm Batteries:2x12 V/ 40 Ah Dimensions:560x1000x1950 mm

TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 370 Chamber dimensions:mm 400x370x120/180(H) Vacuum pump:20 m³/h Working cycle:about 30 sec

Bucket in painted sheet with forkable base to sweep the snow. On request it is possible to apply a ballast box. FIXED model width 1400 mm: B315 - width 1400 mm, (dimensions 1415x1330x740 mm, weight 121 kg) fixed with double life interchangeable steel wiper ADJUSTABLE models width 1500-2300 mm: snow plow rotation RH and LH to 5 positions of degrees 5 ° - 15 ° - 30 ° B315ORG - width 1500 mm, (dimensions 1515x1360x740 mm, weight 195 kg) adjustable in double life interchangeable polyurethane rubber B315LORG - width 2300 mm, (dimensions 2315x1800x740 mm, weight 350 kg) adjustable with double-life interchangeable polyurethane rubber wiper

Ideal for safely storing gas tanks. Welding system certified UNI EN ISO 3834-2. The tank is equipped with: Hinged door with anti-intrusion closure Galvanised roof Tanks inner hooking in chequer plate steel Modular structure Ramp access in sheet metal Safety labelling Dimensions:mm 1120x945x2120h Capacity:9-12 cylinders Load:190 Kg

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products Table top diameter:mm. 800-1000-1200-1400 Variable speed:from 4 to 9 rpm/min Installed power:Kw. 0,18 Power supply:380V three-phase Standard height of the top with adjustable feet :mm. 810 (+/- 40 mm)

TABLETOP VACUUM PACKAGING MACHINE DZ 260 T Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. This machine, with compact size, low consumption and a very short cycle time, is suitable for both the alimentary than for technical articles. The tank of modest size and the vacuum pump with a capacity of 8 m3/h. ensure high productivity. Sealing bars length:mm 260 Chamber dimensions:mm 385x282x100(H) Vacuum pump:8 m³/h Working cycle:about 30 sec

ME 300 SI SHOP SEALER IN STAINLESS STEEL , sealing up to 5 mm This unique stainless steel portable impulse sealer makes it possible to seal bags rapidly while holding the bag with two hands. To activate the sealer the user just needs to depress the work table. This versatile sealer allows the user to package more products efficiently and quickly, they can be used on table top or wall mounted to do vertical sealing. Makes a strong 2,5mm wide seal (wire changeable) on material up to 0,15 mm. x 2. Rust-proof stainless steel body. Seal lenght:mm. 300 Seal width:mm. 2,5-5 Material sealable:PE-PP

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data. Sealing bars length:mm 450 Chamber size:mm 466x405x117H Nr. gas nozzles for bar (only in the version with gas):2 Vacuum pump:20 m³/h Cycle time :24 seconds Air re-entry time:8 seconds

Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with width of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm. The load varies mainly depending on the width of the plan.

Roller conveyors extensible with metal rollers for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase. Extendable roller :Galvanized steel wheels with ball bearings Bearing structure :Galvanized steel Supports (STD) :Adjustable in height da mm. 650 a 900 Wheels :In rubber with diameter mm. 80 with brake Roller type :2 modules - minimum length 1000 - maximum length 3000 - 3 supports Roller type :3 modules - minimum length 1400 - maximum length 4500 - 4 supports Roller type :4 modules - minimum length 1800 - maximum length 6000 - 5 supports Roller type :5 modules - minimum length 2200 - maximum length 7500 - 6 supports Roller type :6 modules - minimum length 2600 - maximum length 9000 - 7 supports Orderable width (mm):500 - 650 - 800 Capacity (Kg/mt) :30

STAINLESS STEEL VAC SERIES New series of professional external vacuum packing machine external for counter. Very robust as made entirely of stainless steel. Operation with embossed envelopes or three layered. Perfect for use in restaurants, catering or domestic environment are supplied with CE certificate and manual of use and maintenance. Main features: Working cycle fully automatic, space-saving, self-lubricating pump. Sealing bar dimensions:mm 330 or 430 or 530 Air suction:l/min 10 or 20

SHELVES WITH TANKS LIQUID WASTE SERIES FPB801/802 Modular system consists of a structure in tubular steel, a collection tank and a floor grid support. The tubular structure is available in versions for single or double barrel and it is stackable, making it possible to safely store up to 4 drums. Containers of liquid pollutants must be stored safely, in particular to prevent any contamination of aquifers. The collection tanks are watertight, coated with epoxy powders and the support surface is grilled galvanized. Warning: prices are valid for the individual modules to be combined. Example model:FPB801 ARTICLE:Single shelf SIZE LxPxH mm.:880x785x910 FINISH:Painted CAPACITY:300 Kg.

2 side sealing bars lenght 600 mm, vacuum pump 40 m3/h. Also available with MAP - Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. Sealing bars length:mm 600 Number of bars:2 laterals Vacuum pumps:40 mc/h Work cycle:about 30 sec Useful width:mm 530 Useful lenght:mm 620 Useful heigth (chamber + lid):mm 160/250

IGHT INDUSTRIAL BROOMS WITH STEEL BRISTLES FOR FORKLIFT TRUCKS Light industrial brooms with painted steel structure and metal brushes. Suitable for sweeping squares, car parks and industrial work areas from dirt, waste, aggregates and scraps. They can also be used to remove sludge from courtyards but only if equipped with the appropriate adjustable metal blade. The brooms can be forklifted with a forklift in the appropriate seats. Red color.

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP). Number of sealing bars:2+2 front-rear Sealing width:mm 3x2 (two 3 mm parallel seals) Length of sealing bars:mm 820 Chamber dimensions:mm 910x800x225 Useful chamber dimensions:mm 820x650x180H pump:100 m³/h Working cycle:25- 30 seconds

Powerful stapler made of high quality steel for staples with length of up to 14 mm. Suitable for intensive use on fabrics, heavy fabrics, leather, etc. power regulation equipped in 3 levels which allows to simply and rapidly increase power when required. Specially designed to reduce the effort of the arm and the fatigue even after several hours of work. This model is compatible with staples series 13 with lenght of 6-8-10-14 mm, total width of 10,65 mm, section 0,50x0,75 mm. Used staples:steel staples serie 13 Staples lenght:from mm 6 to mm 14

INDUSTRIAL BROOMS FOR FORKLIFTERS Industrial brooms with painted steel structure and flexible polypropylene brushes. The structure can be fitted with a normal forklift and the brushes do not damage the floor Also available in the version with magnetic plate for the collection of small metal pieces.

The series of containers with wide mesh are suitable for the transport and display of products in supermarkets and warehouses. Are easily removable for quick storage. STEEL BASE: Base wire and steel pipe complete with wheels polypropylene (2 fixed and 2 swivel) mm. 106x 40 mounted on bearings with roller cages (load x wheel Kg. 150) Shoulder Mesh mm: 110x405 h Base mesh mm: 45x130 Soldering at 360 ° on the wires Tubes reinforced shoulders Thick materials more 'solicited 5 holes for drainage Roll container with wide mesh, base 700x800 mm height 1600/1800 mm available in: CP04.01.2 standard 2 walls CP04.01.3 standard 3 walls CP04.01.4 standard 4 walls Roll container with wide mesh, base 600x1200 mm available in: CP04.06.2 2 walls, height 1800 mm CP04.06.3 3 walls, height 1800 mm CP04.06.4 4 walls, height 1800 mm Roll container with wide mesh, base 800x1200 mm available in: CP04.03.2 2 walls, height 1800 mm CP04.03.3 3 walls, height 1800 mm CP04.03.4 4 walls, height 1800 mm Example model:700x800 h1600/1800 Capacity:Kg 600 Base:700x800mm Shoulder mesh:mm. 110x405h Wheel type:Polypropylene 2 fixed and 2 swivel External dimensions:715x805x1600/1800h mm Finish:Zinc electroplating brilliant

Practical, handy and very robust scale. Ideal for weighing food and technicians and for sale to third parties. The APPROVED scale is required when you have to sell products and to be able to demonstrate (in addition to being 100% sure) that the weight shown is the real goods. The scale ACS-M is characterized by the ABS structure with mechanical waterproof membrane. Thescale of compact size and an extremely practical in its use, is also equipped with a splashguard case that allows it to operate in condition of high humidity or in presence of dust. It's equipped with two large RED LED displays, one front by 30 mm and 5 digits, then one back from 20 mm to 5 digits. The weighing plate is mm. 220 x 290. Fed thanks to the autonomy of the rechargeable battery 50 hours or from external power. The main functions of the ACS-M are: 1- Tare Function 2- Function measurement units 3- Check High-Low 4- External calibration 5- Programmable Autoff Scale model:ACS 6M (load max 6 Kg) Capacity and Division (homologated):up to 3 Kg division 1 gr . from 3 Kg to 6 Kg division 2 gr.

Pneumatic strapping tool with seal for flat and round packages. Suitable for strapping round packages and goods with small contact surfaces. Rugged, lightweight, compact, it is suitable for medium/light applications. Available in three versions: 1500N - 3000N - 4500N. Works with glossy or blue strap from mm. 13 to mm. 19 with max. thickness of 0.6 mm. The strap held depends on the type of material to be strapped and the strapping choice. Model:MOD. ST 13-16-19 Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Seal overlap - length mm. 24 Weight:Kg 4,5

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

WEIGHING BARS FPPMB SERIES - INDICATOR EXCLUDED Pair of weighing bars suitable for weighing boxes or pallets such as hoppers, conveyor belts, roller conveyors, tanks, crates, etc. They can be applied in packaging lines for weighing boxes and pallets pre-filled with material. CE-M verifiable standard version for sale to third parties. TECHNICAL FEATURES - Functioning with 4 shear-beam approved IP68 stainless steel load cells (PMBL) and with 2 approved off-center aluminum load cells (PMBS-PMBM-PMBX), according to OIML R60 standards with protection against dust and humidity according to IP65 standards (350 Ohm input resistance). The price indicated refers only to weighing bars. The photos are purely indicative and show the various applications of the bars (*) CE-M divisions obtainable only with the relative options, combined with our indicators. Example model:PMBSI150 Dimensions (LxPxH) mm.:400x80x105 Load max kg:150 Standard division g:20 CE-M divisione g (*):50

TIPPING BUCKET FOR MOVING SAND OR SNOW New bucket made with sturdy steel structure and high load capacity which makes it suitable for handling materials such as rubble, earth, sand, gravel, snow, fertilizers, grains etc., using a forklift. The automatic tipping is practical and safe, in fact, without getting off the elevator, the operator can operate the spring release system using a practical rope. TECHNICAL FEATURES: - Thick blade, welded on the bottom - Sturdy shovels for forking by forklift or vehicles equipped with forks - Two spring clips to cushion strong blows during unloading - Two-component acrylic water-based painting Red Ral 3000 FEATURES:MODEL 310 Capacity:500 liters Max load:Kg. 900 Dimensions (L x P2 x P1 x H):mm. 1200x950x1450x700 Tare:Kg. 170 Full load weight:Kg. 1070

PPF SERIES: PNEUMATIC FILLERS FOR CREAMS AND SAUCES STAINLESS STEEL AISI 304 - easy washable Volumetric dosing with pneumatic operation series PPF for the dosing of sauces and creams. Stainless steel AISI 304 construction with column for floor installation and adjustable support. Easy use and cleaning idael for small workshops and frequent variations in production. Designed for dispensing food products, chemicals, cosmetics, pharmaceuticals, etc. Available in five models with capacity max. 250 ml. - 500 ml. - 1000 ml. - 2000 ml - 5000 ml. The internal volume of the hopper is approximately 25-30 liters depending on the model. The dispenser is equipped with an adjustable work surface with a maximum height of mm. 500. To obtain a suitable working height to maintain a correct position during the dosage it is advisable to purchase the stainless steel support with feet. Example model:PPF-500 Pressure:0.4-0.6 Mpa Capacity:100-500 ml Speed:5-10 cycles/min Precision:≤1%

STAINLESS STEEL MANUAL PALLET TRUCK MOD. FPGS25-I - CAPACITY 2500 Kg. The FPGS25-I hand pallet truck is built with an electropolished AISI 304 stainless steel structure and is therefore suitable for use in the food, pharmaceutical or chemical industry or in humid or saline environments. The internal pump is made of brass with excellent resistance to humidity and oxidation. It is a robust and versatile model that is suitable for handling pallets and pallets even with heavy weight. This model is characterized by: - Structure in AISI 304 stainless steel sheet - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm mounted on ball bearings. Load :Kg. 2500 Forks length (l):mm. 1150 Forks width (b5):mm. 525 Single fork width (e):mm. 150 Max. fork height (h3):mm. 115 Min. fork height (h13):Min. fork height (h13) Total lenght (l1):mm. 1550 Rudder height (h14):mm. 1160 Front wheels material:in nylon Rear rollers material:nylon/stainless steel

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine. Sealing bar length:mm 400 Sealing width:mm 10 Chamber size:mm 400 x 85/180 x 350H Maximal product height:mm 300 Vacuum pump:20 m³/h Cycle Time:about 25 sec.

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420 Chamber height (tank + cover):mm70/130 Vacuum pump:20 m3/h Work cycle:about 30 sec Sealing bars:2 lateral

Tastiera autonoma antivandalo in acciaio inox. Oltre 100 articoli e design presenti nel nostro listino. DIGICODE e un marchio CDVI Group registrato a livello internazionale. Il marchio DIGICODE racchiude tutta la famiglia di tastiere antivandalo in acciaio inox, Zamak, Alluminio e policarbonato. Tastiere per il Controllo Accessi. Le tastiere antivandalo della CDVI sono conosciute nel mondo e si distinguono dalle altre per la sua forma e costruzione affidabili e resistenti a qualunque tipo di atto vandalico. Progettate per qualunque ambiente interno ed esterno e a qualunque condizione atmosferico. Nella produzione CDVI esistono oltre 100 articoli diversi di questa famiglia e ognuna è stata progetta per rispondere alle necessità ed esigenze di ogni ogni singolo paese nel mondo. Tutti i nostri prodotti CDVI sono garantiti per un periodo pari a 10 anni. Dimensioni (L x W x D):165 x 43 x 27mm Assorbimento:da 30 a 100mA

Suitable for kitchens and food laboratories. Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY - WITH UNDERCOUNTER Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The lower floor is reinforced and soundproofed at high capacity. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with widths of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm.

VACUUM PACKAGING MACHINES DZ 500 T - BIG CHAMBER Bench vacuum packaging machine with front sealing bar, made ​​of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that assures a steady control of vacuum. The bigger chamber with rounded lid allows the packaging of products with max. eight of mm. 180 and the vacuum pump from 20 m3 / h. ensures high productivity. Also available DZQ with gas inlet valve (modified atmosphere). Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 470 Chamber width:mm 500 Chamber length:mm 460 Chamber eight :mm 120/180 Vacuum pump:20 m³/h Working cycle:ca. 30 sec