Termékek acélunk (46)

Helix steel aisi Helical bar in AISI 304 stainless steel, cold drawn, with high mechanical performance, for the reinforced styling of joints and for connections, including through-holes, on masonry, reinforced concrete, arches and vaults. Suitable for the consolidation of structures in seismic areas; advantageous in combination with hydraulic binders (cement and hydraulic lime) and with resin matrix binders, it particularly facilitates the achievement of physical and mechanical performances in combination with Unisan mortar, with those of the REPAR, GROUT family and with the structural resins of the SYNTECH family. The optional accessory Connector Steel Aisi 304, supplied separately on request, allows the connection between the passing helical bar and the helical bar positioned deeply on the stripped joint. Helix Steel AISI 304 bars are available in a range of diameters: 6, 8, 10 or 12 mm, all characterised by their durability even in aggressive environments, their high tensile and shear strength, and excellent flexibility. Such characteristics make the use of these bars particularly advantageous in combination with hydraulic binders (cement, hydraulic lime), air binders (air lime) and resinous matrix binders. Flexibility, handling and versatility with various binder matrices, permit the realisation of rapid, non-invasive reinforcement operations, being easy to apply and with low installation costs. Very high mechanical physical benefits come when combined with our mortars of the REPAR, GROUT and Unisan lines and the structural resins of the SYNTECH line. Reinforcement operations on concrete and masonry structures. Reinforced pointing of joints. Structural one-sided connections or through-holes crossing the entire section. Helical morphology allows optimal gripping on bricks, mortars, stones and on old walls of historical and cultural interest generally. The durability against atmospheric and environmental conditioning makes the use of Helix Steel AISI 304 bars particularly advantageous in the structures affected by the presence of aggressive soluble salts (sulphates, nitrates, phosphates). Reinforced pointing of joints: Deep stripping of joints can ensure the placement of the bar at a depth of a few centimetres from the surface. To remove any loose and crumbly parts (stone, bricks, enticing mortar, etc.). Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Connections on masonry, concrete, arches and vaults: Make sure that there are no loose or crumbly parts on the substrate. Stripping of mortar joints. Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Reinforced pointing of joints: Reinforced pointing of masonry joints by filling part of the joint profile with an initial layer of Unisan fibre-reinforced composite mortar (see the data sheet), then on the mortar whilst still wet, inserting the Helix Steel AISI 304 bar before covering with a final layer of Unisan mortar. Press the mortar inside the joint, being sure to press well until totally full and flush with the wall. The temperature of the substrate must be between +5° and +35° C. Connections on masonry, concrete, arches and vaults: After carefully preparing the substrate and before applying the first layer of structural mortar (lime- or cement-based depending on the type of operation), wet with water at low pressure until complete saturation, bearing in mind that a lack of saturation may prevent adhesion and cause cracking in the mortar. If necessary, apply a rough coat of Untersana mortar. Proceed with creating holes of a suitable diameter and inclination (at 45° if the operation is undertaken only on one side of the structural element). Before they are bent in anticipation of the mesh, the connectors emerge from the substrate by at least 10–15 centimetres from flush with the wall. Apply an initial coat of Unisan fibre-reinforced composite mortar (see the technical data sheet) by hand (with stainless steel trowel or putty knife) or with a plastering machine to achieve a thickness of about 1.5 centimetres, leaving the surface sufficiently rough to facilitate the adhesion of the subsequent layer. Alternatively, depending on the structural requirements, mortars of the REPAR line can be used. Place the primed alkaline-resistant fibreglass mesh of the ARMAGLASS STUCTURA line (see the technical data sheet of the selected product), placing it on the still-fresh mortar by passing the Helix Steel AISI 304 connector between the bars of the mesh. After bending the connector, restraining the mesh, apply a second finishing layer of mortar (Unisan or REPAR) at a thickness of about 1.5 centimetres. Product to be purchased as needed. Packaging: Roll of 10 meters UM: €/kg

La « Living Table SPICA » de Iron Art Mozaic est une table faite à la main qui combine des carreaux de mosaïque et du fer forgé. Elle a un diamètre de 83 cm et une hauteur de 73 cm. Cette table est le fruit d'un travail artisanal complexe et d'un design unique, ce qui en fait un ajout élégant à tout espace de vie. La table est circulaire, ce qui complète le design rayonnant de la mosaïque. Cette forme ronde en fait une pièce centrale idéale dans un salon, offrant une esthétique équilibrée.

Readymesh MM-150 Fibres, obtained by the cutting of steel wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of Readymesh MM-150 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour. Readymesh MM-150 are particularly recommended for increasing ductility, toughness and thermal conductivity in concrete coatings for floor heating systems. General preparation of screeds, cements and fibre-reinforced concrete. Particularly recommended for compact prefabrications, thin concrete floorings and radiant floor heating systems. "Readymesh MM-150 fibres must be added to the concrete during mixing. It is recommended to pour the fibres directly onto the loading belt of the concrete mixer during the loading of the aggregates. Alternatively, it is possible to add them directly into the mixer after loading the concrete or into the onsite mixer. In this case, extend the mixing time by at least one minute (after a minimum of 3 minutes) for every m³ of packaged concrete in order to achieve optimal distribution. If using a 200-litre onsite mixer, add the fibres immediately after loading part of the aggregates and before adding the remaining parts. The typical dosage of Readymesh MM-150 fibres varies from 15 to 30kg/m³. Conglomerates with Readymesh MM-150 can be easily transported and used with pumps, joiners, vibratory finishing machines, roadway extruders (e.g. slipform paver), etc. These fibres are typically used in conglomerates that have an aggregate diameter not exceeding 10-15mm." Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag UM: €/kg

Readymesh MF-500 "Carbon steel fibres, obtained by the cutting of metal wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of Readymesh MF-500 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour." General preparation of fibre-reinforced concrete and structural sprayed concrete (e.g. shotcrete). Particularly suitable for high strength industrial flooring and prefabrication. "Readymesh MF-500 fibres must be added to the concrete during mixing. It is recommended to pour the fibres directly onto the loading belt of the concrete mixer during the loading of the aggregates. Alternatively, it is possible to add them directly into the mixer after loading the concrete. In this case, add the fibres a little at a time so that they are well-distributed in the cement mix and extend the mixing time by at least one minute for every 20 kg of fibres added in order to achieve optimal distribution. Conglomerates with Readymesh MF-500 can be easily transported and used with pumps, joiners, vibratory finishing machines, roadway extruders (e.g. slipform paver), etc.". Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag Unit of Measure: €/kg

Readymesh MS-350 Carbon steel fibres, with a profile for improved adherence to the dimensional reinforcing, structural, of concretes in general. The addition of Readymesh MS-350 allows for considerably increasing the mechanical performance of the product in relation to tenacity, ductility and resistance to fatigue, the resistances to the dynamic stresses, the mechanical tensile and bending behaviour, even post-crack, and resistance to impact and wear. Production of grouts and fibre-reinforced concretes in general, sprayed structural concretes (shotcrete). In addition, due to their contained length, the fibres Readymesh MS-350 are particularly suitable for the production of pre-cast blocks. The Readymesh MS-350 fibres will be added to the project concrete, during the mixing of the same. It is advisable to apply the fibres directly on the load tape in the concrete mixing plant, during the loading phase of the aggregates. Alternatively, you can insert them directly into the truck mixer at the end of the loading of the concrete. In this case, mixing should be extended for at least one minute for each m³ of packaged concrete in order to achieve optimum dispersion of the fibres themselves. The dosage of steel fibres may vary depending on the final use from a minimum of 15 kg/m³ to a maximum of 75 kg/m³. Conglomerates with Readymesh MS-350 can be easily transported and placed on site using pumps, shotcrete machines, pavers, road extruders (type "slip form paver") etc. ; the carbon steel fibres Readymesh MS-350 can be added to the mixture during both the packaging phase and when the mixture is ready. Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag Unit: €/kg

Le cintre métallique CLASSIC d'IronArt Mozaic est un accessoire élégant et pratique conçu pour ajouter une touche d'élégance à n'importe quel espace. Ce cintre présente une construction métallique élégante qui dégage un attrait classique intemporel. Sa finition comprend souvent des surfaces métalliques polies ou mates, qui offrent à la fois durabilité et aspect raffiné. Le cintre CLASSIC présente généralement un design simple et épuré avec des lignes épurées, ce qui le rend suffisamment polyvalent pour compléter une variété de styles d'intérieur. Il est conçu pour être fonctionnel, offrant une solution robuste et fiable pour suspendre des vêtements ou des accessoires. Dans l'ensemble, le cintre métallique CLASSIC allie forme et fonction avec une finition métallique sophistiquée, ce qui en fait un choix idéal pour améliorer l'organisation et l'esthétique des placards, des entrées ou des dressings. Matériaux : mosaïque, fer forgé:Technique : fait à la main

Naša nerotirajoča rezilna orodja izdelujemo z uporabo najmodernejše tehnologije, podprte z dolgoletnimi razvojnimi izkušnjami. Za naše naročnike lahko izdelamo orodje iz različnih materialov, s katerimi dosežemo daljšo življenjsko dobo ter visoko natančnost pri uporabi.

Cortec VPCI® 414 es un limpiador desengrasante biodegradable a base de agua que también elimina revestimientos temporales como Cosmoline ™, Cortec VPCI 368, VPCI 388, VPCI 389, así como sustancias de cera sin silicona de superficies metálicas y pintadas. Caracteristicas Removedor temporal de revestimientos para trabajo pesado Eficaz como desengrasante ligero Eficaz como removedor de aceite ligero No es inflamable Puede utilizarse eficazmente a temperatura ambiente. Esto reduce la necesidad de aparatos de calefacción que consuman energía. VPCI 414 se puede utilizar en un baño caliente para la eliminación de hidrocarburos pesados ​​y revestimientos residuales. Líquido viscoso que se adhiere bien a techos y superficies verticales. Formulación lista para usar Efectivo cuando se usa a bajas concentraciones Continúa trabajando y proporcionando protección contra la corrosión incluso después de limpiar las piezas

Dry Erase Lacquered Magnetic Boards are a versatile and practical solution for both personal and professional use. These boards feature a smooth, lacquered surface that is easy to write on and erase, making them perfect for brainstorming sessions, meetings, and educational purposes. The magnetic properties allow users to attach documents and notes, keeping important information visible and organized. Available in a variety of sizes, these boards can be customized to fit any space, from small home offices to large conference rooms. The durable construction ensures long-lasting performance, while the sleek design adds a touch of sophistication to any setting. Whether you're planning a project or teaching a class, these boards provide a reliable platform for communication and collaboration.

Frameless Magnetic Boards offer a modern and minimalist design that complements any contemporary space. The absence of a frame allows for seamless integration into any environment, creating a clean and unobtrusive look. These boards are perfect for creating large, continuous writing surfaces by combining multiple panels, making them ideal for collaborative workspaces and creative environments. The magnetic surface is easy to write on and erase, providing a versatile platform for brainstorming, planning, and presenting ideas. Available in various sizes and customizable options, Frameless Magnetic Boards can be tailored to fit any space and design preference. Their sleek appearance and functional design make them a popular choice for offices, schools, and homes looking to enhance their communication and organization capabilities.

Enamelled Magnetic Boards are designed for those who require a durable and long-lasting writing surface. The enamel coating provides excellent resistance to scratches and stains, ensuring the board maintains its pristine appearance even after extensive use. These boards are ideal for high-traffic areas such as classrooms, offices, and conference rooms, where they can withstand frequent writing and erasing. The magnetic surface allows for easy attachment of notes and documents, making these boards a practical tool for organizing and displaying information. Available in various sizes and configurations, Enamelled Magnetic Boards can be tailored to meet the specific needs of any environment. Their robust construction and elegant design make them a valuable addition to any space, enhancing both functionality and aesthetics.

Magnetic Flipchart Boards are a versatile and mobile solution for presentations and meetings. These boards feature a magnetic surface that is easy to write on and erase, making them perfect for brainstorming sessions and interactive discussions. The flipchart holder allows for the attachment of paper pads, providing additional space for writing and drawing. Equipped with wheels for easy mobility, these boards can be moved effortlessly between rooms and locations. The adjustable height and sturdy construction ensure comfortable use and long-lasting performance. Whether you're conducting a training session or leading a team meeting, Magnetic Flipchart Boards offer a practical and efficient way to present and share information.

Hydraulic pull-in device for mounting bearings max. pulling force 100 kN, stroke up to 200 mm, horizontal design Application The bearing press is suitable for the simple mounting of bearings, plain bearings or sleeves/bushings by hydraulically pulling them into the bearing seat. Main areas of application - Industrial assembly workstations - Mounting bearings in housings - Maintenance work - Bearing assembly on large/heavy components Description The bearing press is designed for the hydraulic insertion of bearings into housing components and is available in a horizontal design. Guided on a knuckle boom crane with a balancer (not included in the delivery), the bearing press can be used ergonomically anywhere and can also be mounted on a trolley. The pullin cylinder can be used either from the right or left by converting the hydraulic cylinder. The device is operated by means of a twohand control. Adjustable force range:100 kN Max. stroke:200 mm Retraction travel speed:22 mm/s Extension travel speed:13 mm/s Electrical connection:M12 connector Hydraulic connection:G1/4 Weight:20 kg

Ø32x6 mm 24.5 kN, with body 500 bar, see page B1.480

Tuyauteries et autres éléments de raccordements (acier, inox…)

Magnetic Glass Boards offer a modern and stylish solution for displaying information and enhancing interior decor. These boards feature a magnetic surface that allows for the use of neodymium magnets, making them ideal for organizing and displaying notes, memos, and other important documents. The glass surface is also writable with liquid chalk or glass markers, providing a versatile platform for communication and creativity. Available in various sizes and customizable with any print, these boards are perfect for offices, homes, and educational settings. The high-quality tempered glass used in these boards ensures durability and resistance to scratches and high temperatures, making them suitable for a wide range of environments. Whether used as a decorative piece in a living room or a functional tool in an office, these boards offer both practicality and aesthetic appeal. Their customizable nature allows for personalization to match the decor and needs of any space, making them a versatile and valuable addition to any setting.