Termékek acélunk (16861)

Für lufttechnische Anlagen nach EN 12220 werden aus dem Werkstoff S235JRG2 (St37 2) in roher und feuerverzinkter Ausführung als auch in den Werkstoffen 1.4301, 1.4541 und 1.4571 Lagermäßig geführt. Ausführungen aus anderen Werkstoffen werden auf Bestellung gefertigt.

Weight: 0,64 kg Height: 85 cm Width: 6,7 cm Material: 24 mm 19990:Ornament Sheet

The impact elements consist of three components that are connected to one another by hot vulcanization A special rubber compound with a hardness of 62 ° Shore A, which absorbs the falling energy A top layer made of high sliding UHMWPE and a thickness of 10 mm A vulcanized aluminum profile for easy installation of the beams Special bolts with M16x40 also available in M12

Kompakter OEM-Druckmessumformer Heavy Duty Anwendungen: ► Mobilhydraulik, Pressen ► allgemeiner Maschinenbau Merkmale: ► Edelstahl-Sensor, verschweißt ► Genauigkeit nach IEC 60770: 0,5 % FSO ► Nenndruckbereiche von 0 … 16 bar bis 0 … 600 bar

Automatic CNC turning brass pin with surface chrome plated - Automatic CNC Turning Material:Brass Processing Type:CNC turning Surface treatment:Chrome plating Tolerances:+0.02 mm/-0.02 mm, according to ISO 2768-m

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

Hochwertiges Säulentischgestell für Stehtische: - Stahl, pulverbeschichtet oder Edelstahl - Variante eckig: 2 Säulen quadratisch 70 x 70 mm (Edelstahl: 60 x 60 mm), Bodenplatte: rechteckig 40 x 80 cm - Variante rund: 2 Säulen rund Ø 76 mm, Bodenplatte: rechteckig 40 x 80 cm - 2 Tischplatten-Auflageflächen: 25 x 25 cm - abriebfeste Kunststoffbodengleiter inkl. Niveauausgleich bis zu 10 mm - passende Schrauben Zur Auswahl: - Farbe der Säulen - Farbe der Bodenplatte - Form der Säulen Wir bieten Ihnen folgende Mengenrabatte an: ab 20 Stück 3% | ab 40 Stück 5% | ab 99 Stück 7% Bei größeren Mengen fragen Sie uns bitte nach einem Sonderrabatt! Gestellfarben:Aluminium, Schwarz, Edelstahl, Blau, Gelb, Grün, Rot Für Tischplattengrößen:110 x 70 cm bis 120 x 80 cm Gewicht:41,1 kg | 41,9 kg Herkunft:Europa Höhe:109,6 cm Material:Stahl Versandkostenfrei:ab 250 € netto Warenwert

We offer also high precision laser engraving services on steel, stainless steel, aluminum, or copper. We can custom engrave any type of sign, drawing, or letters on metals.

Xian Huan-tai Technology and Development Corp., Ltd Specializes in manufacturing and exporting investment castings and sand casting. Our company founded in1995 Covering 30000 square meters, with the annual output capacity of 1200 tons. The company has production capabilities of tool making, investment casting with all silica sol process, machining and heat treatment. Huan-tai has become a leading metal parts manufacturer in south of China, Relying on the integrated superiority in advanced equipments and professional team. The company offers OEM service of investment castings& sand casting and other metal parts. The castings are exported to USA, Germany, France, Canada, Italy, Spain and many other countries. Customers at home and abroad are warmly welcome to hold business talks with us. APPLICATION FIELDS: Crusher equipment, Machinery parts and components, Mobile parts, Pipe couplings, Tools hardware, Kitchen hardware, Shower hardware，Lamps hardware, Marine hardware, Building hardware,

Here is the range of the stainless steel winches which we have in our programme. Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. 

The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches (hoisting) TL = spur gear winches (hoisting) TC = spur gear winches (pulling) Version coding: FS = provided with cable drum free spool device SS = stainless steel...

Spring for extra light loads Material:Steel Temp. Max:250 ° C

1.20X1.80 - Ref. 20220303

China Oil Screw Plugs Supplier, Custom Stainless & Carbon Steel Oil Screw Caps sales@mxmparts.com

HASSPIPE produces a high quality range of PVC-U well casings and screens strictly in accordance with the Standard TS 11794 and ISO standarts, class I, II and III. The standard TS 11794 and ISO applies as well for raw materials and workmanship of pipes used in the manufacture of the casing and screen. There are three basic ranges - a standard range for shallow, medium well depth and a heavy duty, thick walled range for greater well depths. The casing and screens are made from 100% virgin unplasticized poly vinyl chloride compound and are coloured grey. They are supplied with a male pipe thread at the spigot end and a female pipe thread at the socket end. No re-worked material is used. The pipe is produced under ISO 9001:9002 Quality Management System. Screens can be supplied with either a plain or filtered surface. Slots are arranged vertically to improve the mechanical strenght of the screens and are designed to give open areas ranging Materials:PVC-U Slot Sizes:Available slot width 2.0 mm

Kamień 4

ABES Poller 011 ist ein Absperrpfosten aus Aluminiumguss mit ovaler Grundform und einem schneckenförmigen Kopf sowie einer überlappenden vertikalen Naht. Befestigung Zum Herausnehmen mit 3p-Technologie, bestehend aus einer Bodenhülse, einem Verbindungsstück mit Sollbruchstelle, zwei Spannkegeln und einer 6-Kantschraube. Alternative: Version zum Einbetonieren. Ausführung – Pulverbeschichtung in Standard-RAL-Farben oder DB 703. Die Grundausstattung für ABES Poller 011 mit 3p-Technologie umfasst: – Poller, Aluminiumguss, pulverbeschichtet nach RAL oder DB 703 Eisenglimmer – Abmessungen (H über Grund x Ø in mm): 860 x 120×96/108 – Bodenhülse 300 mm (000.001), verzinkt – Verbindungsstück (000.008), verzinkt – Spannkegel-Paar 6-Kant (N1+N2+6-Kantschraube), Edelstahl 1.4301 (000.004) Typ:für öffentliche Bereiche, für Schulen, für öffentliche Einrichtungen, für Kindergarten, Parkplätze Material:Aluminiumguss Eigenschaft:ortsfest, herausnehmbar mit 3p-Technologie

The control units AQ1 and AQ3 are equipped with 1 and 3 motor connections respectively and are designed for all Assfalg handpiece electric grinders. The control units support infinitely variable speed control and store the set maximum speeds for each connection individually. The intelligent control electronics enable applications that previously required a large number of control units. At the same time, the peak power of up to 300 watts allows the most demanding materials to be processed. AQ 1:75369 AQ 3:73801

Solar Energy Systems Profiles SLR-09 Ref:SLR-09

Componenti meccanici torniti a disegno del settore medicale e farmaceutico - Particolari e minuterie a disegno conto terzi realizzati da materiali ferrosi e non ferrosi, mediante lavorazioni meccaniche di precisione di tornitura e fresatura su macchine utensili CNC torni automatici, centri di lavoro e frese Realizzazione conto terzi di minuteria a disegno conto terzi da 2 mm a 40 mm, particolari lavorati da barra fino a 80 mm e particolari torniti di ripresa fino a 300 mm di diametro ricavati da spezzoni o fusioni. Applicazione: componenti metallici e plastici a disegno per il settore dell'industria medicale e farmaceutica

Mounting steel profile system is an important part of developing and constructing the process of each photovoltaic system. Universal slot pattern helps to apply appropriate steel profile and swift mounting of the whole system. As a result of using high resistance materials during the production process, mounting profiles offered by MFO have high stiffness and moreover, they have appropriate anti-rust zinc protection based on hot-dip galvanized process (according to norm PN-EN ISO 1461:2011). Product application: - solar farms - Mounting of photovoltaic panels on flat and sloping roofs - building and mounting of small photovoltaic systems

Pressacavi WADI one in acciaio inox - una soluzione perfetta per fare passare cavi per varie applicazioni industriali. Caratteristiche: — serraggio delicato sul cavo a causa della grande area di tenuta — scarico della trazione integrato — amplio campo di serragio — per cavi da 3 a 53 mm — montaggio facile — temperatura: -40 °C / +100 °C (dinamica) — grado di protezione IP66 / IP68 fino a 15 bar (30 min.) / IP69 — con filetto metrico M12 - M63 Materie:Ottone nichelato Grado di protezione:IP66 / IP68 - 15 bar (30 min.) / IP69 Per cavi con diametri:3 - 53 mm

Aluminium (Each kinds), Iron (GGG15, 20, 25, 40, 50), Çelik (X20Cr13, WCB, alloyed), Stainless Steel (SS304, SS304L, SS316, SS316L, SS321, duplex, super duplex) materails CNS machinings Maximum weight:10 tons

Wrapped composite sliding bearing Stainless steel / PTFE coated | Maintenance-free dry sliding bearing | Corrosion resistance | Chemical resistance | DIN 1494 / ISO 3547 NOX-MET® is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, high load capacity, shock resistant, chemically resistant against acids and bases (ph-value 0-14), corrosion resistant. For technical details, please visit the product page on our website! Support material/Carrier material:1.4301 (1.4401 on request) Intermediate layer:Sintered bronze Sliding layer:PTFE Static load:≤ 250 [N/mm2] Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2.0 [m/s] Friction value:0,02 to 0,18 Temperature strain:–200 to +280°C Max. PV-value:1,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

Galvanized Railing - SCALE

PRÄZISIONSFLACHSTAHL MIT BEARBEITUNGSAUFMASS 1005 - 1030mm TOLERANZ Dicke:+ 0,2 / 0 mm TOLERANZ Breite:+ 0,4 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE vorgeschliffen, feingefräst:N8 Ra 3,2 OBERFLÄCHE vorgeschliffen, feingefräst:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 775N/mm² (230HB max.) Farbcode:1.2510 GRÜN Erzielbare Härte:Hrc 61-63

Pregiati utensili immancabili in ogni cucina, forme e dimensioni studiate per rispettare le esigenze di camerieri e personale ma anche dei clienti che li utilizzano nei self-service e buffet.

INOTECH MACHINING offers CNC machining of aluminum parts with a precision of up to 0,01 mm. We have the capabilities to process all types of aluminum alloys. Aluminum is an easy-to-process metal with unique peculiarities. Because aluminum is a lightweight metal with an increased resistance to corrosion it is preferred by many industries. We pride ourselves on having the capabilities and expertise to produce flawless aluminum milled parts for the aeronautics industry, the pharma industry, and the food sector. Machines for CNC milling: - 3-axis, 4 axis, and 5-axis machines. - From 10 x 10 x 10mm to 2000 x 10000 x 1500mm.

Längsdrähte und Querdrähte werden an jedem Kreuzungspunkt mittels elektrischem Widerstandsschweißverfahren zu Schweißgitter materialschlüssig verbunden....Es entsteht ein stabiler Maschenverbund, der durch die Wahl der Materialien, der Drahtdurchmesser und –geometrien in Kombination mit der Maschengestaltung sowohl leicht, flexibel und offen, als auch fest, starr und sicher sein kann.Unser moderner Maschinenpark ermöglicht große Maschengenauigkeit. DDD Schweißgitter finden Anwendung in High Tech Industrien, im Bauwesen und in der Landwirtschaft. leichte Edelstahldrahtgitter ab 0,40 mm (Drahtnetze)aus blankem Draht oder Edelstahl werden als Lüftungsgitter, Einlagegitter, Filtermaterial, medizinischer Drahtkorb, Tierkäfig oder in der Architektur eingesetzt. Schwerer geschweißte Drahtgitter bis zu 16,0 mm Drahtstärke dienen als Sicherheitsgitter, als Drahtsieb für Steine, Bewehrungsgitter, Schutzgitter, Absperrgitter oder als Traggitter.

Structure-Line offers the perfect synthetic sheets for seamless edge finishing of furniture components. The smooth reverse face means that the sheets can be bonded onto derived timber products completely free of cavities. The edges can be finished via bevelling or ABS application. All the sheets of the Structure-Line can be obtained in a width of 1550mm and in an infinite length.

Edelstahl Kerzenfiltergehäuse zur Aufnahme von Filterkerzen der Länge 5" bis 30" mit allen gängigen Adaptern Die Filtergehäuse der Serie 1FU sind Kerzenfiltergehäuse zur Aufnahme einer DOE-Filterkerze oder Adapterfilterkerze (Code 8). Diese Gehäuse sind so konzipiert, dass alle gängigen Filterkerzenlängen aufgenommen werden können. Die Anschlüsse N3 und N4 erlauben die Anbringung einer Differenzdruckanzeige. Montagewinkel und Öffnungsschlüssel sind optional erhältlich. Zulassung: DGRL2014/68/EU Regelwerk: AD-2000 ATEX: optional