Termékek acélunk (16847)

Das Rohrleitungssystem NiroTherm® besteht aus hochwertigen NiroTherm®-Edelstahl-Pressfittings mit einer schwarzen Formteildichtung aus EPDM (Ethylen-Propylen-Dien-Kautschuk) und NiroTherm®-Edelstahlrohren. Das System - Edelstahl-Pressfittings wie Rohre - wird aus dem Werkstoff-Nr. 1.4301 gefertigt. NiroTherm® bietet Verarbeitern somit eine echte Alternative zu geschlossenen Systemen aus herkömmlichen Werkstoffen, beispielsweise C-Stahl, mit der sich oftmals hohe Arbeitskosten für eine aufwendige Isolierung gegen Feuchte einsparen lassen. NiroTherm® Edelstahl-Pressfittings sind außen zusätzlich zur Systembezeichnung durch einen roten Punkt gekennzeichnet und lassen sich so auch auf der Baustelle gut von anderen Fittings unterscheiden. Hochwertige Edelstahl-Pressfittings und Edelstahlrohre 1.4301 (AISI 304), EPDM

WE MANUFACTURE ALL KINDS OF IRON STRUCTURES, FROM DRAWING TO DESIGN

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost Equipment:Schuko, RJ45 double Design:rectangular Ground:wall Protection:IP44 Material:Aluminum, Stainless steel Color:Aluminum Surface:anodized

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):35 x 35 x 0,8

Scie radiale à lame de 565 mm Spécifications, Diamètre et alésage de la lame,565 mm (bore 30 mm)Hauteur de coupe,200 mm @ 90°, 135 mm @ 45° Largeur de coupe max @ hauteur de 20 mm,570 mm Largeur de coupe max @ hauteur de 125 mm,400 mm Longueur maximale de la pièce,illimitée Largeur maximale en coupe parallèle,action non permise en version CE Vitesse de rotation de la lame,2800 RPM Dimensions de la table de travail,1870 x 1108 mm Dimensions et poids, emballée,1500 x 1000 x 1750 mm, 326 kg 14-RZ700S,RZ 700S, Moteur 400 V /5,5 kW (7,5 cv) (S6),€ 7.890

Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material. material:steel, alloy steel, copper, aluminum weight:from 10g to 10 tons surface treatment:custom

La cimentación es un proceso de tratamiento termoquímico austenítico que se aplica a las piezas de acero, incluso aquellas que son prácticamente hierro. Durante este proceso se enriquece la capa exterior con Carbono o con Carbono y Nitrógeno para mejorar sus propiedades. El objetivo del tratamiento térmico de la cementación es endurecer la superficie de una pieza aportándole una alta dureza, pero sin llegar a modificar la composición del casco, creando así una pieza tenaz y resistente a la fatiga y al desgaste provocado por el trabajo de roce. Es uno de los procesos que más se utiliza para piñones, levas, poleas, casquillos… Son piezas que trabajarán en frío y con bastante fricción, por lo que al haberles aportado una capa (de hasta 1,4 mm. ) de dureza, evitaremos su desgaste. Además, también cabe destacar que los materiales adecuados para la cimentación son los aceros aleados y no aliados con un bajo contenido en carbono, como el ST-52, F-154, F-155

The Pegas Horse Wings Signet Ring is a breathtaking piece of jewelry. Made from Sterling Silver 925, it embodies both grace and power. Crafted in Turkey, this ring features an oxidized finish that highlights its intricate design. Our ring is made from 100% recycled sterling silver. This sustainable approach adds a unique charm to each piece. Weighing 25 grams, the ring provides a comfortable yet substantial feel. If you value both style and environmental responsibility, then this ring is perfect for you. The Pegas Horse Wings Signet Ring features detailed designs inspired by the mythical Pegasus. This symbolizes freedom and strength. Additionally, the oxidized finish gives it a vintage appeal, making it suitable for various occasions. Wear it to showcase your unique style. Each Pegas Horse Wings Signet Ring is meticulously crafted in Turkey. Our artisans use traditional techniques to ensure high quality. As a result, every ring is durable and exquisitely detailed. A meaningful gift, its symbolic design and elegant craftsmanship make it a treasured present. Give this ring to someone you care about, and they will cherish it forever.

machine constructions

Hafif Raf Sistemlerinin üzerine konulan ürünlerin özelliğine göre metal üstlü, ahşap üstlü ve seperatör bölmeli olarak üretilebilmektedir. Raf yüksekliği yüksek depolarda bu sistem asma kat (katlı platform) sistemlerine dönüştürülebilmektedir.

Le poussoir latéral doit être emmanché dans l’alésage D1 au minimum de la cote L3. Il sert à positionner et à serrer de petites pièces dans des éléments de montage. Si la pièce doit subir une opération d’usinage, un serrage d’appoint par des éléments de serrage supplémentaires peut s’avérer nécessaire. Lors du stockage des sous-ensembles intégrant le poussoir latéral, veillez à ce que le ressort en plastique ne soit pas sous contrainte. Il s'agit pour la force du ressort d'une valeur moyenne statique. Indication de dessin : 1) Surface moletée 2) Emmanchement Référence:03340 Corps:acier de décolletage Bille:acier ou Inox traité ou POM Ressort:Inox ou plastique Corps:bruni Bille:poli

El pavonato es un tratamiento térmico muy utilizado para reducir los efectos de la corrosión o como elemento decorativo, dejando la superficie del acero en color negro brillante. Consiste en aplicar una oxidación protectora para evitar la corrosión. Es un proceso sencillo que no supone riesgos para la pieza y es aplicable a casi todos los tipos de acero, excepto los inoxidables o aceros como el F-521/1.2379/K-110.

Rinfor Grout Col is a special cementitious formulation, being fibre-reinforced with READYMESH technology, enriched with reactive microsilicates with very high pozzolanic activity and special crystalliser additives that increase the end result and the durability. Mixed with water, it is able to forge micro-concretes with pourable rheology. Once hardened, the product offers exceptional physical-mechanical and ductility values. Ideal for the reinforcement and seismic adaptation of flooring in reinforced concrete, brick-concrete or corrugated sheeting or wood, by constructing a thin extradoxal structural screed along with beams, pillars, structural crosspoints and walls, by means of suitable liners. The rheological and physical-mechanical characteristics of the Rinfor Grout Col product render it extraordinarily effective in reinforcing structural elements in reinforced concrete and masonry. Adhered to the inside of caissons, confined within cavities or spread out over the extrados of foundations and lofts, Rinfor Grout Col allows for low thickness structural reinforcing, substantially devoid of additional metallic reinforcement. Rinfor Grout Col belongs to the HPFRC (High Performance Fibre Reinforced Concrete) family, permitting the structural designer to make use of the following characteristics: - Exceptional resistance and traction as well as exceptional values of shear stress adhesion on various supports which have been suitably roughened; - advantages in structural calculations prescribed for fracture mechanics, resistance to traction and of the ultimate material deformation; - minimum thicknesses applied with reinforcing effects which have been distinctly improved as against interventions with traditional reinforced concrete; - highly notable reduction of mass and minimizing of additional loads applied for structural reinforcing as against interventions with traditional reinforced concrete (practically nil additional loads in the case of the thickness of the coating corresponding with the depth of sacrificed surface); - anti-carbonatation barrier (practically zero penetration of CO2) and anti-oxidant barrier; - auto-healing of any micro-fissures exposed to contact with fluids, thanks to the particular crystallising additives; - increment of durability of the structures repaired with Rinfor Grout Col, thanks to the migration effect of the crystallising additives; - very high resistance to fire; - eco-sustainability - made up of 100% mineral and metallic materials, totally recyclable at end of life. From the environmental point of view, the Rinfor Grout Col product is characterised by the following advantages: - Ecological packaging (card-cardboard) - product based on hydraulic binders, selected aggregates and mineral additives with content of organic raw materials < 1% - practically nil VOC emissions during installation; once hardened, nil VOC emissions. - containing a fraction > 5% of sub-products from the production industry 100% recyclable at end of life. For seismic adaptation with absorption and transfer of pressure or traction during events with elevated dynamic forces (seismic, impacts, deflagration); - for structural reinforcing and seismic upgrading through coating of beams, pillars structural ties, walls; - for reinforcing and seismic upgrading with external, low thickness, structural screed for lofts in reinforced concrete, concrete masonry, corrugated sheeting, wood;
 - for fabrication of light, thin section, structural elements
; - for the repair of flooring with need for resistance against elevated static and dynamic stresses, together with exceptional values of resilience and resistance to impacts; - for reinforcing and precision anchoring of heavy and highly stressed machinery: E.g. wind turbines, turbines, precision machinery, etc. The support must be in good condition, clean, sufficiently coarse, without crumbling parts or dust, pressure washed and saturated with water before application. With concrete, the abrasiveness of the support must be > 3mm; to obtain this level of coarseness, techniques of hydro-scarifying, bush-hammering, mechanical chiselling, sand blasting with large grain may be considered. With the case of surfaces in strongly absorbent brick-work (lofts in brick cement with surfacing of parts in brick) or in the case in which it is impossible to saturate the support with water, contact our technical services to evaluate suitable adhesion primers, such as Syntech Pavisheer or Syntech RGS. Above all, when used as a surface covering of lofts in concrete, or as a repair to industrial flooring, providing anchoring roots by drilling the support is particularly useful for increasing resistance to cuts and adhesion to the support (diameter 18-20 mm, depth 20 mm), and accurately cleaning the surfaces of the holes before spreading the Rinfor Grout Col.

Metal ventilation grilles are a durable and stylish solution for ensuring proper air circulation in your home or office. These grilles are crafted from high-quality metals such as stainless steel or galvanized iron, offering exceptional strength and resistance to corrosion. Their robust construction makes them ideal for both indoor and outdoor use, providing reliable performance in a variety of environments. With their sleek design and metallic finish, metal ventilation grilles can also enhance the aesthetic appeal of any space, adding a touch of modern elegance to your decor. In addition to their visual appeal, metal ventilation grilles are designed to optimize airflow, ensuring efficient ventilation throughout your property. Available in a range of sizes and styles, these grilles can be customized to fit any opening, providing a seamless integration with your existing ventilation system. Whether you're looking to improve air quality or simply update the look of your space, metal ventilation grilles offer a practical and attractive solution that combines form and function.

Lame de fraise scie acier toutes dimensions disponibles pour le débit et la coupe de tube inox ou acier

Szlifowanie profili w każdym rozmiarze do wymaganego Ra

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):45 x 45 x 0,9 Pollici:1 ¾

Metal injection moulding (MIM)

OGGO Tech operates in steel constructions and parts. We are a third-generation family company. We provide reliable and competitively priced products with quality. Over 90% of OGGO Tech projects are directly exported to companies in EU countries. Certification: ISO 9001 ISO 3834-2 EN 1090-2 EX3 WPS, PQR, WPQ In house capabilities: Laser Cutting Sheet Metals up to 35mms Laser Profile Cutting Bending Sheet Metal, Profiles, Pipes Professional Welding Hot Dip Galvanize Electrostatic Coating

Seamless Steel Pipe begins as a solid cylindrical hunk of steel called a billet. While still hot, billets are pierced through the center with a mandrel. The next step is rolling and stretching the hollow billet.

Les dimensions sont sur notre fiche technique à télécharger.

We turn your ideas into reality! For example as clean steam - boiler steam converters for connection to saturated steam units for sterilization and disinfection in hospitals. Stainless steel design Do you have specific ideas or requirements which will have to be fulfilled? We will gladly face the challenge. We manufacture according to your specifications! Our products are made of steel and stainless steel, custom-made for our clients. Tanks and other reservoirs made of steel and stainless steel, e.g. as clean steam - boiler steam converter Stair railings and staircase design Steel and stainless steel tube and sheet metal constructions Wrought iron garden fences and entrance gates Gate systems (also with operator) Garden fences Banisters for balconies and terraces Product displays Covers and hoods Sign holders Tanks and pressure vessels for leisure boats, caravans and other applications Dock constructions, fixtures and other accessories for aquatic sports DINO Anlage- und...

LSJ Engineering provides architectural balustrades and privacy screens, as seen in our work at Merton St, Wimbledon, London. Read more about it on our blog!

Wir ferigen komplexe Bauteile aus Aluminum auf unseren automatisierten 5-Achen Fräsmaschien. Durch unseren modernen Maschinenpark sind wir in der Lage, Aluminiumbauteile von Prototypen bis zu Serien in höchster Qualität flexibel zu fertigen. Die Dimensionen erstrecken sich von Bauteilen mit einer Abmessung von 20 x 20 x 20mm bis zu einem Störkreis von Ø 1400mm

Les billes de précision inox sont essentiellement utilisées sur des roulements à billes ou vis à billes. Elles sont notamment caractérisées par une excellente tenue à la corrosion. On retrouve tous types d’inox avec ou sans traitement thermique. La matière est approvisionnée suivant l’AMS 5618 et le traitement thermique des billes est certifié NADCAP pour être en accord avec les exigences aéronautiques. Nous sommes également capables de fournir des billes industrielles pour des guidages linéaires, des pompes (cosmétique), des billes de broyage ou autres applications (Nous consulter). Niveau de précision : bille Grade 3, bille Grade 5, bille Grade 10, bille Grade 100 ** Demander un devis **

As a sector; We serve General Machinery Manufacturing, Valve and Pump Manufacturing, Iron and Steel Rolling Mills, Railway Sector, Mining and Crushing, Energy Sector and Shipbuilding Sectors. As production; We produce castings in Unalloyed Carbon Steels, High and Low Alloy Steels, High Manganese Steels, Stainless Steels, Gray Cast Irons, Spheroidal Graphite (Sphero) Cast Irons, and Ni-Hard Casting Heads. Product Code:GS-52

Previous12Next Unser 1500 kVA ContainerDieselleihgenerator kann Sie bei Ihren geplanten oder Notstromerzeugungsanforderungen unterstützen. Ideal für groß angelegte Hoch und Niederspannungsanwendungen ein 1500 kVA Generator bietet flexiblen, portablen Strom. Die Daten basieren auf 50 Hz. Für weitere Informationen fordern Sie bitte ein Datenblatt zu unserem 1500 kVA Dieselgenerator an. Der dargestellte Generator ist nicht unbedingt repräsentativ für die zu diesem Zeitpunkt verfügbare Ausrüstung. 1500 kVA Generatoren sind in maßgeschneiderten ISO 20' oder 40' Stahlbehältern eingeschlossen. Modulares Design für optimale Flexibilität des Projektdesigns. Super flüsterleise Schalldämpfungsniveaus ohne Beeinträchtigung der Leistung. Sortiment an Transformatoren sowie unterstützende Hoch und Niederspannungsausrüstung verfügbar. KRAFTSTOFFTYP:Diesel KRAFTSTOFFKAPAZITÄT (L):1431 NENNLEISTUNG KW (KVA):1120 (1400) KRAFTSTOFFVERBRAUCH:275 GEWICHT (KG) BETANKT:20370 BREITE (M):2,44 LÄNGE (M):6,06 HÖHE (M):2,60

Deckel Maho - PRODUCTION PROCESSES Model:DMC 63V Size:X630 Y510 Z460

NAIDEKA, UAB is a client-oriented metal processing company.

Le joint orientable à rotule assure un contrôle précis de la direction de la pulvérisation. Il permet une régulation flexible de la buse. Il s'applique également à des machines et des installations. Il offre une plage angulaire de 40° à 50° et un réglage complet en 360° sans interférer avec la tuyauterie. Il suffit d'installer la buse dans le joint et ajuster son orientation. Il y a un larges passages internes pour minimiser les risques d'obstruction. Cet accessoire existe en inox comme en laiton.