Termékek artex kabát (14)

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

IRIS is an acrylic cement paint, for interior and exterior use based on acrylic resins. It is recommended for building surfaces such as concrete, plaster, bricks, etc. It has a highly whitening and covering effect and it is also protective against humidity, high temperature and heavy weather conditions.

At Koelstra you can buy products and collections from the categories: Baby products Buggies Travel beds. Visit our showroom in Trademart.

Waterbased pigmented primer for all types of masonry substrates. Suitable even on fresh concrete and mortar. Features Excellent adhesion to concrete. Excellent alkali and efflorescence resistance. Excellent water resistance. Good UV resistance. Interior and exterior. Eco friendly. Solvents free. Ready for use, do not dilute.

Biological based concrete stain and cement remover for resistant paving and flooring of natural and concrete stone. Fast and reliable removal of concrete-, cement-, lime- and efflorescence stains.

Nettoyant dégraissant industriel polyvalent en solution aqueuse à haut pouvoir émulsifiant. Hyper polyvalent – Concentré – Économique – Ininflammable – Biodégradable – Contient un inhibiteur de corrosion Le dégraissant professionnel le plus polyvalent et le plus adapté pour tout nettoyer et dégraisser. Composé d’une solution riche en produits actifs naturels et synthétiques non polluants. Permet un nettoyage subtil, rapide et efficace. Concentré économique et pratique. N’altère pas le plastique, le caoutchouc, le plexi, le tissu, le verre… S’utilise pur ou dilué. Ne laisse pas de film gras. Ne pollue pas le milieu naturel. Contient un inhibiteur de corrosion. Ininflammable, biodégradable, sans solvants chlorés, sans hydro carbure, sans ammoniaque, sans butyl glycol. Réf:i505 Conditionnement:Bidon de 1 L avec Vapo – Carton de 20 Métiers:Métalliers Ex:CETEXALT ORIGINAL

ECOCLIX DESIGN ist ein weit ausgebautes, variables Informations- und Leitsystem mit sehr attraktiver Optik. Über eine Funktionsleiste, die in allen Farben und nahezu allen Oberflächen lieferbar ist. Dabei überzeugt ECOCLIX DESIGN vor allem in Bürobauten und bei öffentlichen Auftraggebern nicht zuletzt aufgrund seiner komfortablen Textwechselmöglichkeiten und der vermittelten Wertigkeit. Der Textwechsel erfolgt mittels Folie über einen praktischen Klemm-Mechanismus. ECOCLIX DESIGN besticht durch eine attraktive 8 mm starke Acrylglasscheibe in Echtglasoptik, gehalten von einem Aluminium- C-Profil. Die Montage erfolgt direkt ohne Abstand an Wandflächen, Glaswänden, Decken oder frei aufgestellt als Stelen.

Round drill heads

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

EUROCOAT of COSMOCHROME is a high quality rust primer produced with excellent european materials. It is an ideal primer undercoat for the protection of all metallic surfaces from rust.It is suitable for interior and exterior use. It can be applicated with brush or spray gun. Thinning 10% with white spirit or turpentine for use with brush and 20% for use with spray gun. PACKAGE:0,375 LT, 0,75 LT, 10 LT, 2,5 LT, 20 LT COLOR:Black, Cypress Green

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions PACKAGE:0,17 LT, 0,375 LT, 0,75 LT, 10 LT, 3 LT COLOR:Black, Blue

ΜETAL PRIMER of COSMOCHROME is a high quality undercoat for enamel paints for use on metallic surfaces. It is also suitable for yellowing surfaces. It has very good working properties, with strong adhesion and great covering power. PACKAGE:0,375 LT, 0,75 LT, 10 LT, 2,5 LT, 20 LT COLOR:Brown, Grey, White

Gel microbilles sans solvant, salissures fortes Excellentes performances nettoyantes – Parfum orange frais et tonique – Testé sous contrôle dermatologique Pour graisses, lubrifiants, cambouis, hydrocarbures, goudron, poussières freins, peintures fraîches. La texture adhérente du savon gel microbilles AEXALT Orange n’agresse pas la peau et se rince facilement. Le gel laisse un touché doux sur l’épiderme et une discrète odeur citronnée. Idéal dans les ateliers, sur les chantiers, les services de maintenance, en imprimerie, etc. NB : les gels microbilles AEXALT sont formulés avec des abrasifs d’origine naturelle. Réf:SA671 Conditionnement:Pot de 5 L, Seau de 15 L, Seau de 25L Parfum:Orange Ex:AEXALT ORANGE

Débloque et lubrifie les pièces grippées avec une grande efficacité. Compatible avec tous les métaux. Produit particulièrement mouillant. Il pénètre rapidement entre les surfaces oxydées, disperse la rouille, les salissures et les dépôts divers pour libérer les mécanismes corrodés ou coincés. Laisse un film gras très mince formant une barrière protectrice contre l’eau et l’oxygène. Diminue le frottement entre les pièces mécaniques et les plastiques. Une action prolongée permet d’éliminer les traces de rouille, cambouis, goudron, colle, adhésif, résine ou calamine même brûlée. Protège les métaux sans agressivité vis-à-vis des peintures et caoutchoucs. Chasse l’humidité et assure des contacts électriques parfaits. Appliqué au montage, il assure une protection de longue durée en s’opposant à l’accrochage de la rouille sur le métal. Compatible avec tous les métaux et la plupart des plastiques, peintures, etc. Réf:AO773 Conditionnement:Bidon de 5 L – Carton de 4, Fût de 220 L