Termékek artex kabát (22)

In the Abalioglu Feed Factory project located in Burdur, we have performed warehouse steel processing. we used 78 tons of steel on an area of 2000 m2.

IRIS is an acrylic cement paint, for interior and exterior use based on acrylic resins. It is recommended for building surfaces such as concrete, plaster, bricks, etc. It has a highly whitening and covering effect and it is also protective against humidity, high temperature and heavy weather conditions.

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

Waterbased pigmented primer for all types of masonry substrates. Suitable even on fresh concrete and mortar. Features Excellent adhesion to concrete. Excellent alkali and efflorescence resistance. Excellent water resistance. Good UV resistance. Interior and exterior. Eco friendly. Solvents free. Ready for use, do not dilute.

Protects the outdoor insulation from U.V. and inclement weather. White paint:0.75 litre

Biological based concrete stain and cement remover for resistant paving and flooring of natural and concrete stone. Fast and reliable removal of concrete-, cement-, lime- and efflorescence stains.

Es verkauft automatische Tücher für die zuverlässige Reinigung von Autos und es funktioniert rund um die Uhr. Es funktioniert mit Münzen und gibt dem Benutzer das Produkt aus dem Produktreservoir von Auto-Trockentüchern gleichbleibender Qualität. Nennspannung:12 V/DC IP-Schutzklasse:IP67 Arbeitstemperatur:15 °C, +40 °C Länge x Breite x Tiefe:164 x 94 x 32 CM Art.-Nr.:0612092Y VE:1 Auto Range:Nein Digitale Sensorreduzierung:DNR L.A. Länge:20/40/80 Zahlungsmodul:Münze, Token

Redu-Kat ist eine 32,5%ige Harnstofflösung zur Nachbehandlung von Abgasen in Fahrzeugen Redu-Kat Harnstofflösung ist eine exakt 32,5 %-ige Harnstofflösung nach ISO 22241/DIN 70070 zur Nachbehandlung von Abgasen in dieselgetriebenen Fahrzeugen mit SCR Katalysator. Redu-Kat Harnstofflösung kann in allen Fahrzeugen, die mit SCR Katalysator ausgestattet sind, problemlos eingesetzt werden. Es wandelt im SCR Katalysator giftige Stickoxide (Nox) in Stickstoff und Wasserdampf um, kann eine Kraftstoffeinsparung bis zu 8 % bewirken und ist sehr gut umweltverträglich. Redu-Kat gibt es in Gebindegrößen von 1l - 1000 l.

Our yarns are used in weaving, knitting and knitwear as well as women's / men's clothing, military, safety and outdoor clothing, as well as lace, socks, seamless clothing, sportswear and technical textiles. Polyamide (nylon) yarns are also used in fabric production together with natural or other synthetic yarns. Denier :70 Filament :34 Yarn Type :FDY Yarn Type :Textured Yarn cross-section :round Color :half mat Color:Full mat Color:Dope Dyed

AFR-OMEGA LD x CD x L x e:160 x 40(52) x 24 x 1,5, 160 x 40(52) x 24 x 2,160 x 40(52) x 24 x 3 ACIER kg/m²:10,8, 14,4, 21,6 ALUMINIUM kg/m²:3,6, 4,8, 7,2 Formats maxi Panneaux mm:LD1000/1250/1500 x 3000 ou LD2000/2500 x 1600 maxi Epaisseur apparente (interne) mm:16 Vide frontal % Vide maxi:15 env.46

Garanti Edilen İçerik (%W/W) Organik Madde 15 Alginik Asit 0,5 Suda Çözünür Potasyum Oksit (K2O)3 pH 8-10 Ürün Özellikleri Karaca, toz formunda elden edilen deniz yosunu kaynaklı özel enzim, organik ve doğal içerikli mükemmel bir üründür. Giberellik, alginik asit ve sitokiler gibi doğal bitki enzimleri içerir. Toprağa verilen alginik asitler, besin elementlerinin alım etkinliğinin artırılması yanında, bitki bünyesine alınan besin elementlerinin meyve ve tane oluşumuna-dönüşümüne hizmet eder.

Properties: ALDOVET SAN is a special surface disinfectant concentrate on an excellent bactericidal, fungicidal, and virucidal effect. ALDOVET SAN is very well suited for the disinfection of surfaces and equipment in livestock barns, as well as for working surfaces, sanitary facilities, and animal transport vehicles. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses (e.g. ALDOVET TENS). After the surfaces are cleaned and dried the proper use-solution of ALDOVET SAN is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.

Le produit MAX PROTECT FLEX est une peinture de ravalement de façade particulièrement élastique qui a été conçue pour permettre l'imperméabilisation de supports faïencés ou micro-fissurés. Cette peinture élastoplastique de très haute qualité a été formulée pour faire face à des conditions climatiques défavorables (façades du littoral) et pour répondre aux demandes des professionnels les plus exigeants. MAX PROTECT FLEX est une peinture en phase aqueuse.

Acrylic copolymer is an emulsion-based, silicone-folded, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

Axeb liquid chelates are complex micronutrient formulations containing organic agents to guarantee a high level of metal stability (Zn, Fe and Mn, among others). Axeb solid chelates are a family of products suitable for preventing and correcting iron chlorosis in crops, in the form of granules or pellets.

SOLVENT PAINT of COSMOCHROME is a high quality undercoat for concrete surfaces (concrete columns, concrete floors, walls, ceramic tile roofs etc). It is highly durable against extreme weather conditions and atmosphere pollution. It has strong adhesion, great covering power and extreme hardness PACKAGE:0,75 LT, 10 LT, 2,5 LT COLOR:Black, Cypress Green

EUROCOAT of COSMOCHROME is a high quality rust primer produced with excellent european materials. It is an ideal primer undercoat for the protection of all metallic surfaces from rust.It is suitable for interior and exterior use. It can be applicated with brush or spray gun. Thinning 10% with white spirit or turpentine for use with brush and 20% for use with spray gun. PACKAGE:0,375 LT, 0,75 LT, 10 LT, 2,5 LT, 20 LT COLOR:Black, Cypress Green

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions PACKAGE:0,17 LT, 0,375 LT, 0,75 LT, 10 LT, 3 LT COLOR:Black, Blue

ΜETAL PRIMER of COSMOCHROME is a high quality undercoat for enamel paints for use on metallic surfaces. It is also suitable for yellowing surfaces. It has very good working properties, with strong adhesion and great covering power. PACKAGE:0,375 LT, 0,75 LT, 10 LT, 2,5 LT, 20 LT COLOR:Brown, Grey, White

Our yarns are used in weaving, knitting and knitwear as well as women's / men's clothing, military, safety and outdoor clothing, as well as lace, socks, seamless clothing, sportswear and technical textiles. Polyamide (nylon) yarns are also used in fabric production together with natural or other synthetic yarns. Denier : 90- 100 Filament :48 Yarn Type :FDY Yarn Type :Textured Yarn cross-section :round Color :half mat Color:Full mat Color:Dope Dyed

AFR-URBAN LD x CD x L x e:R100 x 30 x 13 x 1,5, R100 x 30 x 13 x 2 ACIER kg/m²:10,4, 13,4 ALUMINIUM kg/m²:3,55, 4,7 Formats maxi Panneaux mm:LD1000/1250/1500, CD > 3000 Epaisseur apparente (interne) mm:13 Vide frontal % Vide maxi:17 env.

AFR-EXA05 LD x CD x L x e:E50 x 23 x 8 x 1,5, E50 x 23 x 8 x 2 ACIER kg/m²:8,2, 10,95 ALUMINIUM kg/m²:2,85, 3,75 Formats maxi Panneaux mm:LD1000/1250/1500, CD > 3000 Epaisseur apparente (interne) mm:10 Vide frontal % Vide maxi:43 env.