Termékek csomagküldési szolgáltatás (358)

New lightweight and handy device with practical handle with additional controls for rapid gas and electronic ignition opening. The high power and ease of use of this device allows fast retraction of thermo plastic films of any thickness and the packaging of large products. FEATURES - Structure with double insulation for continuous use without overheating and without risk of burns; - Terminal with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db. Example model:RAFALE 65 Max power (kW):37-66 Supply:Propane Gas pression (bar):1.5-3.5 Gas consumption (Kg/h) :2.6–4.8 Ignition:Electronic

Valvola a sfera 2 vie flangiata PN16 [Valpres artt. 730008 da DN25 a DN65 - 730003 da DN80 a DN200] in ghisa, con sfera e asta inox AISI 304, passaggio totale, scartamento secondo norma EN558 basic series 14 (DN200 basic series 27), con attuatore elettrico serie 85.

Wrapping machine constituted by tubular structure on which it is possible to hang the garment already pre-packaged in the upper part. The machine is equipped with sealing bar air that allows the lower welding of the hanging clothing. Sealing width 80 cm. with pneumatic closure bar. Built-in pressure regulator. The sealing is made by pneumatic closing of the bar. You can also change the height of welding in a practical and fast by pneumatic control. In the standard version the adjustment ranges of about 50 cm. On request it is possible to change the height of the weld. Operation: The operator hangs the dress already bagged the top and insert the edges of the bags in the sealing bars. Through the dedicated command adjusts the height of the sealing bar and closes. Operand button welding makes the closure of the envelope. The sealing cycle is indicated by a warning light and can be adjusted up to about 1. Pressure:5,5 bar Dimensions:810 x800x2005 mm Envelopes can be used in standard:Min 1300 max 1800 mm Stroke height adjustment:50 cm about Stroke welding cylinder:20 cm about Base height:12 cm Alimentation:220 volt

Idler roller conveyors made of a sturdy structure in painted steel, supports with adjustable and height-adjustable feet, galvanized steel rollers with rotation on shielded ball bearings. In this position a convenient and economic box holder has been installed and allows the operator to lock and fill the box in comfort. Once the filling is complete, the operator can detach the box by simply pushing it forward. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1000 mm height:mm. 1000 working height:650 mm Weight:125 kg Belt Drive:left and right

Valvola a sfera 2 vie in 3 pezzi [Valpres Art. 710000 F/F - 711000 SW - 712000 BW], acciaio inox AISI 316, con attuatore elettrico.

Valvola a sfera 2 vie [Valpres art. 720000] flangiata PN16, tipo Wafer, acciaio inox AISI 304 CF8, passaggio totale.

Il dispositivo mettiangolare è disponibile per le reggiatrici verticali, orizzontali ed anche per le incappucciatrici a cappuccio elastico. L’accessorio applica profili rinforzati sugli angoli del carico, conferendo una maggior protezione alle estremità della merce e un punto di appoggio e presa per le regge. Il dispositivo mettiangolare è configurato per lavorare con tutte le taglie e altezze di pallet.

Impilatori automatici e magazzini di pallet vuoti, capaci di lavorare con varie tipologie e forme di pallet.

Bobine monostrato o accoppiate per confezionatrici automatiche assetto verticale/orizzontale Su richiesta, per clienti sprovvisti di confezionatrice si realizzano buste finite, esclusivamente da termosigillare..

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP). Number of sealing bars:2+2 front-rear Sealing width:mm 3x2 (two 3 mm parallel seals) Length of sealing bars:mm 820 Chamber dimensions:mm 910x800x225 Useful chamber dimensions:mm 820x650x180H pump:100 m³/h Working cycle:25- 30 seconds

I sistemi di ispezione a raggi x in grado di soddisfare tutte le vostre esigenze in fatto di sicurezza alimentare.

Bobine monostrato o accoppiate per confezionatrici automatiche assetto verticale/orizzontale Su richiesta, per clienti sprovvisti di confezionatrice si realizzano buste finite, esclusivamente da termosigillare.

Sacchi per frazione organica dei rifiuti.

PRATIKA 55 SMART: AUTOMATIC THERMORETRAIBLE PACKAGING MACHINE WITH INCORPORATED TUNNEL The new model of automatic shrink-wrapping machine Pratika 55 Smart comes from a careful attention to the needs, with the aim of offering a technologically advanced but flexible and extremely compact product. The included tunnel, revolutionary in the world of automatic machines, responds to the needs of space, but above all to reduce the labor costs to a minimum, thanks to the patented "come back" option to a single operator. Enhanced by a strong mechanical and electronic technological content, the new Pratika 55 Smart represents a perfect synthesis of reliability, versatility and safety, which once again evolves the way to conceive the compact automatic operation shrinkwrappers. Power supply:400 V 3 ph + N Max installed power (including tunnel):7.5 kW Hourly production:0-1200 pz/h Max. product size:mm. 400x420x120h Max. reel size:300 mm (diameter) Max. reel band size:600 mm (width) Worktable height:870 mm (h. infeed conveyor) machine size :2390x1190x1680h. Mm Usable films Polyolefins:9-38 microns machine weight:677 / 813 kg

Busta in materiale idoneo al contatto con alimenti. MATERIALE:BOPP

Valvola a sfera 2 vie in tre pezzi, passaggio totale [Valpres artt. 713000 F/F - 714000 SW - 715000 BW] acciaio al carbonio LCB con sfera e asta in inox AISI 304

AUTOMATIC CASE ERECTORS Semi-automatic carton erector for closing the bottom flaps of the box Max. sixe mm. 520x520x700 or mm 670x670x800. The Pack Point is a case erector that, assisted by an operator, automatically folds the four bottom flaps of an American box. In few seconds the carton is ready for the operator to fill: while holding the case, Pack Point allows the operator to use both hands for placing the product into the carton. When the carton is filled, the operator presses a button and the PP automatically transfers the carton into a case sealer for top and bottom sealing. The Pack Point can be linked to a Gem 520/670 (bottom taper) so that boxes can be easily sent to filling lines by motorized conveyors. The machine is equipped with 4 wheels with brakes. Example model:PACKPOINT 520 Box size:Length from 150 to 700 mm Width from 110 to 520 mm Height from 120 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:4 bar Air consumption:13 nl/min Work surface height:650 mm

Valvola a sfera 2 vie [Valpres art. 721000] flangiata PN16, tipo Wafer, acciaio inox AISI 316 CF8M, passaggio totale.

New packaging system that creates air cushions on the spot. Fast, cheap and sile - The cushioning machine AIR BAG FP 600 G is compact and silent and allows you to create air cushions for packaging. It is suitable for use in the food, pharmaceutical, farm and wine industries and wherever it is necessary to pack fragile products such as glass jars, bottles and fragile products. Speed:0-20 m/min Cushions width:mm. 200-400 Film thickness:20 micron Sealing temperature:90-150°C Absorption:450W

Skinpack packing machine at semiautomatic cycle to package objects of either small, medium or large size, between cardboard and transparent plastic film. The skinpack package allow immediate display of the product, possibility of both advertising in colour on the cardboard surfaces, practicality of the packaging, which can be hung in showcases. Safety protection with sensors. The cardboard support can be replaced with a sheet of bubble wrap (bubble polyethylene). CE-approved machine with low voltage controls, electrical panel with Siemens PLC, safety module (Pilz), safety protection on the work area with safety sensor (the movement of the frame descent only occurs with closed protection, the movement of ascent is driven by a dual control). The packaging machine mod. FP-390 has a limited energy consumption as the resistors are activated only at the time of packaging (on the other Skinpacks the resistances are always on) and there is no risk of overheating. Working surface sizes:mm. 540 x 390 Max. package height:mm. 140 Film roll width:mm. 450 Power max:Kw 6 Power supply:380 V 3PH machine size :mm.1500 x 600 xh1350

Pneumatic strapping tool with seal for flat and round packages. Suitable for strapping round packages and goods with small contact surfaces. Rugged, lightweight, compact, it is suitable for medium/light applications. Available in three versions: 1500N - 3000N - 4500N. Works with glossy or blue strap from mm. 13 to mm. 19 with max. thickness of 0.6 mm. The strap held depends on the type of material to be strapped and the strapping choice. Model:MOD. ST 13-16-19 Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Seal overlap - length mm. 24 Weight:Kg 4,5

Shoppers 100% biodegradabile e compostabile conforme alla norma uni en 13432 certificazione TUV Austria, certificato vincotte s556

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420 Chamber height (tank + cover):mm70/130 Vacuum pump:20 m3/h Work cycle:about 30 sec Sealing bars:2 lateral

PACK POINT 08 - CASE ERECTOR Semiautomatic carton erector. It forms the bottom of uniform size batches of American type boxes, with operator. Operation is simple , just insert the open box in the case erector. The four bottom flaps are folded and the box is automatically locked in position for filling. A pneumatic pusher makes the expulsion of the box to a taping machine . The PACK POINT 08 when combined with a taping machine is a compact and productive semi-automatic packaging line. The machine is equipped with 4 wheels with brakes. Box Size:Length from 180 to 650 mm Box Size:Width from 140 to 520 mm Box Size:Height from 100 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:5 bar Consumption per cycle:7,5 nl Work surface height:650 mm

Packaging machine with automatic cycle Skinpack, for wrapping objects of small, medium or large dimensions, between cardboard and transparent plastic film. The extreme usability and the use of unskilled workers encourage the use of this machine. The package Skinpack allows you to see the product immediately, it gives you the opportunity to advertise in color and include information on the carton, convenience of packaging that can be hung in the exhibitors. Given the high power of the machine is possible to use unperforated cartons. Example model:MASTER SKIN 5035 Working surface sizes :mm. 500 x 350 Max. package height:mm. 200 Max. film roll width :mm. 390 Usable film:PVC - SURLYN e PE Pneumatic supply:4-6 bar

BAG OPENER - BAGS OPENING DEVICE The Bag Opener is an opening device characterized by a regular and silent motorized fan and is designed to quickly pack and fill the bags. It consists of a stainless steel body suitable for contact with food and easy to clean. The bags with a hole for hooking are very easy to change and the constant air flow opens them easily one after the other. Fan with two-speed motor and on/off switch. Adjustable guides to facilitate filling. Attention: the collection of the bags takes place by tearing (naturally a small piece of bag will remain torn off). Airflow:550 l/min Power :50W Usable bag width :Max. 400 mm - Min. 160 mm Usable bag lenght :Max. 600 mm - Min. 200 mm Maximum recommended thickness :50 micron (0.05mm) Dimensions (mm) :400x675x150

BSL 5045 SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Angular packaging machines with manual or automatic closing of the sealing bar and motorized product unloading belt. They can be combined with a retraction tunnel. FEATURES: - Sealing blade in NI-CR with non-stick coating - Control of the welding time to avoid overheating - Conveyor belt adjustable in height by handwheel - Double magnet for high closing force - Reel holder sliding on ball bearing guides, useful width mm. 550 - Return of the sealing bar controlled by a gas spring (for the 5045 L manual version) - Pneumatic device (compressed air) for closing and opening the sealing bar (for the BSL 5045 LA semi-automatic version) The BSL 5045 LA model is equipped with a maintained action dual control (the two buttons must be held down until the bars are completely closed). Example model:BSL 5045 LA Max. Sealing Size (L×H)(mm):500x450 Support plan size (L×W) (mm):450x400 H max. product (mm):250 Compressed air (bar):5-6 Maximal reel width (mm):550 Maximal hourly production (pz.):900

Combining the erector to a line (taping base, filling floor and taping machine) it is possible to create the boxes as they need, without engaging spaces for accumulation. The trainer will automatically form boxes, taking them from the side stock and by bending the four bottom flaps. The settings relating to boxes, speed size etc .. are all adjustable by a convenient front panel. The operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F2000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box. Productivity max:840 pieces/hour Charger capacity:110/120 boxes Compressed air supply:6 Bar, 13 Nl per cycle Working plan height:mm. 650 + 30

Semi-automatic line consisting of taping machine FP9036 with side straps (or FP9037 with straps above and below) for closing the upper and lower flap of the box and special plan for loading products. To facilitate the packaging operation of the products, an idle conveyor roller with boxes-stopper plan has been positioned before the taping machine. In this way it is possible to block and fill securely, quickly and easily the box not yet taped simply taking the products from a plan or from an adjacent container. Then, with a simple push, the operator will move the box in the taping machine. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1080 mm (1880 with rollers) height:1470 mm (with taping head) working height:580-780 mm Weight:113 kg Belt Drive:left and right

Busta con cerniera a pressione