Termékek csomagküldési szolgáltatások (359)

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left. Sealing width:mm. 10 Temperature set:0° - 250° Sealable materials:PP –PE – COUPLED Max product weight:Kg. 3

TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 370 Chamber dimensions:mm 400x370x120/180(H) Vacuum pump:20 m³/h Working cycle:about 30 sec

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt. Example model:FM 180 A Load (Kg):1800 Lift height (mm):100 Lifting plate (mm):600x60 Wheels (diameter):150

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction. seal length:mm 600 or 800 Seal width:mm 10 Weldable materials:PE-PP-AL/PE Max. film thickness:mm 0.20 (0.8 total with bellows) Height of Package:mm from 300 to 900

The MINIMA packaging machine designed for medium/small production realities (artisanal, commercial, etc.), makes versatility and minimum bulk its strengths. Absolute reliability and high efficiency, combined with high operating silence, low energy consumption and ease of use, unique in its kind, are qualities that make it a cutting-edge product. All the functions of the machine are displayed and controlled electronically thanks to the digital panel. The dimensions of the support surface are 350x240x140 mm h (height of the closed hood) The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. The choice of the machine must take into account that: the front opening of the "Minima" bell is 23 cm but laterally drops down to zero the dimensions of the box (height + depth) must not exceed the width of the reel 350 mm also considering that there must always be at least 50 mm of waste. Sealing bars dimensions:mm. 380 x 250 Chamber internal volume:mm. 350 x 240 x 140 h Max. coil size:diam. mm. 250 - width mm. 350 Power supply:220V Installed power:1 kw Actual consumption:kw 0.55 Machine dimensions:mm. 930 x 550 x 370 h. Package Dimensions:mm. 1040 x 650 x 570 Net/Gross Weight:Kg. 36/48

Buste ad alta resistenza per trasporto terriccio, concimi, nocciolino, pellet

CARTON SEALER MACHINE MOD. GEM 350 / GEM 360 / GEM 820 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Ideal for fixed format boxes close (with constant height and width). Structure of the machine body made of sheet steel bent, bolted and painted. The movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. Example model:GEM 52 minimum width:100 mm with 50 mm head/150 mm with 75 mm head maximum width:mm 500 minimum length:mm. 150 maximum length:unlimited minimum height:mm 100 maximum height:mm 500 Max tape width:mm 50 (75 optional) Operation speed:22 m/min.

La FB1000 è la linea base della famiglia di incappucciatrici a cappuccio elastico Bocedi, ed è una soluzione molto apprezzata sul mercato. Small, standard, large ed extralarge È una macchina leale al ciclo di imballaggio di fine linea, l’incappucciatrice FB1000 è disponibile in quattro versioni small, standard, large ed extralarge. Capace di incappucciare pallet di dimensioni 2600x1400mm, la FB1000 può essere accessoriata fino a tre bobine di film estendibile, con avanzamento e selezione automatica del film, per garantire flessibilità nell’imballare diverse taglie e tipologie di merce. Bassa manutenzione L’incappucciatrice richiede minima manutenzione. È costruita con componenti meccanici di alta qualità, semplici e consolidati nel tempo, per dare continuità al ciclo d’imballaggio e azzerare i tempi di fermo impianto. Facile da operare Lavorare con la FB1000 è così facile che il suo sistema di srotolamento film ha ottenuto un brevetto proprio per la sua semplicità. Capacità:70 pallet/ora Dimensioni minime pallet:600×600 mm Dimensioni massime pallet:2600×1400 mm FB1000 Small:950x800mm FB1000 Standard:1350x1150mm FB1000 XL:1800x1400mm FB1000 XXL:2600x1400mm

Ideale per la conservazione e l’imballaggio di alimenti quali carni, pesci, salumi e formaggi, prodotta da fibre vergini di cellulosa, esente da imbiancanti ottici, trattata per ottenere caratteristiche di umido e resistenza tali da renderla idonea all’imballaggio di alimenti umidi, idoneità totale al contatto alimentare. MATERIALE:CARTA VEGETALE

001. Busta manico a fagiolo per Farmacie e Sanitarie - NO FOOD

Veline farmacia

MODULAR LINE SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Semi-automatic, angular machines offer maximum packaging flexibility, and a quality product at a competitive price. MODULAR 50S and MODULAR 70, which have recently been updated and revised, can be used to package products using any material, producing highly attractive results. MODULAR LINE uses an electronically controlled sealing system and the very latest safety devices. The lines can be used in automatic or semi-automatic mode, and the operating programs can be customised in order to simplify the packaging process and maximise productivity. MODULAR 50S and MODULAR 70 can also be used with the TUNNEL. Example model:MODULAR 50 Power supply (V):380/415 Phase (ph):3 Power max (kW):2,3 Max output (p/h (pph)):0-900 Useful sealing bars dimensions (mm):540x400 Max film roll dimensions (diameter) (mm):250 Max film roll dimensions (width) (mm):600 Working plate height (mm):930 Machine dimensions with closed hood (mm):1590x750x1100

001. Busta manico a fagiolo - NO FOOD

COMPLETELY AUTOMATIC STRAPPING MACHINE MOD. JN85-M Fully automatic strapping machine with high speed and reliability. The machine is equipped with motorized belts for insertion in packaging lines, aluminum arc with multiple flaps to facilitate the launch of the strap and the subsequent release and electrical system with Omron PLC. The electrical panel of the machine can manage the motorized loading and unloading belts (optional) and allows the use of the strapping machine in lines without operator. Strap width:mm. 9-12 Strap thickness:mm. 0,5-0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:307 Kg

TABLETOP VACUUM PACKAGING MACHINE DZ 260 T Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. This machine, with compact size, low consumption and a very short cycle time, is suitable for both the alimentary than for technical articles. The tank of modest size and the vacuum pump with a capacity of 8 m3/h. ensure high productivity. Sealing bars length:mm 260 Chamber dimensions:mm 385x282x100(H) Vacuum pump:8 m³/h Working cycle:about 30 sec

MANUAL LEVER SEALER WITH CONSTANT TEMPERATURE Thermosealing machine that works with sealing bars at a constant temperature for the closure of polypropylene bags and coupled/aluminum laminate, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and controller for controlling the temperature from 30 °C to 200 °C. The closing of the bars is through a quick manual lever that guarantees a high sealing pressure and allows the sealing of envelopes high thickness with or without side gusset. Attention: it is necessary to preheat for about 5 minutes. The sealer is available in two models: ME 300 CFH BZ with checkered knurled bars ME 300 CFH BL with longitudinally knurled bars Seal length:mm. 300 Seal width:mm. 15 Welding temperature:30°-200°C Thermosealing materials:PE-PP-AL/PE

The PANDYNO FPPD vertical inserters allow to an operator to fill and seal the packs avoiding the use of preformed bags. The operator must in fact insert the product to be packaged in the magazine tube, on which a few meters of tubular film have been previously loaded. The product goes down into the tubular film up to the support surface. The operator manually closes the sealing bar by applying a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times it is also possible to pre-load different magazine tubes so that they can be quickly replaced once the film is finished. The standard model can be placed on a bench and comes with a charger of your choice. Sealing bars length:mm 400 Welding width:mm 2 x 2,5 Polyethylene thickness:Max. 60 µm Chargers dimensions (on choice):cm 8-10-12-15-20 (film width) Welding type:Impulse Bars closure:Manual with magnet

Busta in materiale accoppiato con film barrierato, idoneo al contatto con alimenti.

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:200 Kg

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing. Sealing width:mm. 5-10 Temperature:constant - maximum 200 °C Max sealing thickness:300 my (2x0,15 mm)

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside. Example model:140 Twist Cable Working:pneumatic Air consumption:50 Lt. / min Air pressure:6 bar Machine cycles:30 pcs. / min. Autonomy:About 5000 sealings Type of seal:Twisted lace Reels lenght:600-800 mt.

Ideale per avvolgere panini, focacce, pizza, hamburger, fritti e qualsiasi cibo caldo o freddo. La carta alimentare antigrasso è resistente all’unto e alla temperatura calda dei cibi. In colore avana naturale è ecologica e biodegradabile. Indispensabile per lo street food e il take away; si adatta ai contenitori per asporto, cestelli e vassoi o anche solo per consegnare le preparazioni a mano. Idoneità totale al contatto alimentare. MATERIALE:CARTA ANTIGRASSO

Wrapping machine with turntable FP ECO ROLL for wrapping carriages (roll container), with hooking / manual cutting of the film and buttons for ascent/descent of the reel, guide carriages, foot operated mechanical lock, loading ramp for pallet trucks, progressive starting device. (Machine CE). Maximum load:Kg. 2000 Rotaring table speed:4 - 7 rpm Maximum dimensions trolley:mm. 800 x 1200 (600 x 1400) Max trolley height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V - 50Hz Installed electric power:Kw 0,4 Machine dimensions:mm. 1500 x 2050 x 2450 h Weight:Kg. 35

Rotating table for handling or storage of boxes, with large plan diameter 1500 o 2000 mm and capacity 200 kg. Robust. ROTATING ACCUMULATION TABLE - DIAMETER 1500 mm or 2000 mm The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packaging machines, facilitating the sampling operations by the operator. The table can be equipped with containing side rails and, on request, reinforced to carry heavy weights. OPTIONAL The plan may be made with customized table diameter and a different rotational speed.

Film in accoppiato monomateriale 100% riciclabile per termosigillatrici, confezionatrici (assetto verticale/orizzontale)

The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller Sealing bars size:mm. 550x420 Support plan size:mm. 500x380 Max pack height:mm.200 Tunnel entrance size:mm. 440 x 240 h. Power supply:380V Installed power:5,7 kw Max reel width:mm.600 Hourly production:900 pcs machine size :mm.2330 x 730 x 1380 h Package Size :mm. 900 x 2400 x 1550 h Net/gross machine weight:287 /343 Kg

SEALING MACHINE/BAGGING MACHINE MOD. SUPER - FOR MASSIVE PRODUCTS Machine consists of a loading tube on which a tubular film with a width of 50 cm is fitted. and a manually operated sealing bar. The loading tube is slightly inclined and facilitates the sliding of the product inside the film, without causing sudden falls. By lowering the sealing bar a perfectly sealed bag is obtained and at the same time the bottom of the next bag is created, a hot cutting system separates the two packages. The SUPER bagging machine can be positioned at the entrance barriers of hypermarkets, supermarkets, shopping centers, to reduce theft, small objects but it is also widely used for packaging technical items, clothing, linen, etc. Length of sealing bars:mm 520 Sealing width:mm 2 Loader capacity:30 m film HDPE Max. thickness LDPE polyethylene:60 µ Max. thickness HDPE polyethylene:30 µ Tube size:about cm 30 x 15 Type of sealing :impulse

ME 300 SI SHOP SEALER IN STAINLESS STEEL , sealing up to 5 mm This unique stainless steel portable impulse sealer makes it possible to seal bags rapidly while holding the bag with two hands. To activate the sealer the user just needs to depress the work table. This versatile sealer allows the user to package more products efficiently and quickly, they can be used on table top or wall mounted to do vertical sealing. Makes a strong 2,5mm wide seal (wire changeable) on material up to 0,15 mm. x 2. Rust-proof stainless steel body. Seal lenght:mm. 300 Seal width:mm. 2,5-5 Material sealable:PE-PP

Pneumatic clipping machine suitable for closing bags with twistband (plastic band with one metal core), max. diameter of binding mm. 11-28-38. Bag sealer mod. MINI TWIST working with twistband wire (plastic wire with metal core). Robust and secure machine, entirely made of painted steel suitable for closing packs with easily opened plasticised wire. The parts in contact are entirely made of aluminum. Available in 3 models. Example model:TWIST 100 Working:pneumatic Air consumption:50 Lt. / min. Air pressure:6 bar Machine cycles:40 pcs./min Autonomy:about 6000 clips Type of seal:Twisted lace Length reel:600-800 mt.

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data. Sealing bars length:mm 450 Chamber size:mm 466x405x117H Nr. gas nozzles for bar (only in the version with gas):2 Vacuum pump:20 m³/h Cycle time :24 seconds Air re-entry time:8 seconds