Termékek doboz doboz dobozok (75)

Multifunction scales with fully stainless steel structure with degree of protection IP65, suitable for being used in humid environments. Equipped with waterproof keyboard immune to dust and splashes with diplay 18 mm LCD backlit 4-digit legible. The weighing plate measuring 210x210 mm and is easily washable. Power is supplied via external network power supply included or rechargeable batteries (not included). Weight about 3 kg. FUNCTIONS AVAILABLE: Tare M + weighted summation Total weighted MR Units External calibration AutoFF Signal Low Battery Example model:FPAGS6 Load :6 kg Standard division :0,2 g Division CE-M:2 g Dimensions :mm. 310x220x75h Autonomy:100 hours (80 with backlight)

Extendable roller conveyors with plastic wheels and galvanized steel pantograph structure for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase. Extendable roller :Plastic rollers with ball bearings Bearing structure :Galvanized steel Supports (STD) :Adjustable in height da mm. 650 a 900 Wheels :In rubber with diameter mm. 80 with brake Roller type :2 modules - minimum length 1000 - maximum length 3000 - 3 supports Roller type:3 modules - minimum length 1400 - maximum length 4500 - 4 supports Roller type:4 modules - minimum length 1800 - maximum length 6000 - 5 supports Roller type:5 modules - minimum length 2200 - maximum length 7500 - 6 supports Roller type:6 modules - minimum length 2600 - maximum length 9000 - 7 supports Orderable width (mm):500 - 650 - 800 Capacity (Kg/mt) :30

GEM F470 - F520 - F670 CARTON SEALERS WITH MANUAL ADJUSTMENT - AUTOMATIC FLAP CLOSER AND SIDE DRIVE BELTS Carton sealer with manual dimensioning and and automatic flap closer. It folds automatically the four upper flaps and seals with auto-adhesive tape the top and bottom of batches of uniform size, American-type boxes. The upper taping unit has a patented system which, by regulating a spring, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed. The boxes are fed by lateral conveyor belts, driven by a single motor thus optimising even sliding of the boxes and ensuring perfect alignment of the upper and lower flaps which in turn guarantees perfect sealing. Example model:GEM F470 Boxes width min:mm 100 Boxes width max:mm 520 Boxes lenght min:mm 150 Boxes lenght max:mm 600 Boxes eight min:mm 100 Boxes eight max:mm 670 Tape width:mm 50 (75 option) Operation speed:22 m/min Compressed air:6 Bar Air consumption:2,5 Nl

Lift height mm 1500/2000. Stainless steel version. Forklift with manual operation and battery-lifting, with aluminum upright to guarantee lightness and great maneuverability. The frame is made of AISI 304 stainless steel and the thermoformed ABS hood guarantees hygiene and safety in hazardous environments. Practical and handy it is very useful for lifting loads up to 100/200 kg to a height of mm. 1500 or 2000, depending on the model. Depending on the optional mounted, it can be used to lift boxes, moving coils or hook products with "GX hook". The low structure allows it to fit under standard pallets and reach reels or boxes positioned in the center of the pallet. It comes complete with two 12 V/40 Ah batteries. Example model:BIG 100/150 INOX Load:100 Kg Lifting height:1500 mm Riser height:1920 mm Batteries:2x12 V/ 40 Ah Dimensions:560x1000x1950 mm

Manual stapler, extremely compact and light, suitable for stitching cardboard boxes. Body with a special aluminum alloy and depth/dot shape adjustment. Each model can use two measures of 15 and 19 mm points by simply turning the adjusting device. Staples width:35 mm Charger capacity:100 staples Usable staples:35/15-35/19 mm Weight:Kg. 1,200

COMPLETELY AUTOMATIC STRAPPING MACHINE MOD. JN85-M Fully automatic strapping machine with high speed and reliability. The machine is equipped with motorized belts for insertion in packaging lines, aluminum arc with multiple flaps to facilitate the launch of the strap and the subsequent release and electrical system with Omron PLC. The electrical panel of the machine can manage the motorized loading and unloading belts (optional) and allows the use of the strapping machine in lines without operator. Strap width:mm. 9-12 Strap thickness:mm. 0,5-0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:307 Kg

Idler roller conveyors made of a sturdy structure in painted steel, supports with adjustable and height-adjustable feet, galvanized steel rollers with rotation on shielded ball bearings. In this position a convenient and economic box holder has been installed and allows the operator to lock and fill the box in comfort. Once the filling is complete, the operator can detach the box by simply pushing it forward. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1000 mm height:mm. 1000 working height:650 mm Weight:125 kg Belt Drive:left and right

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products Table top diameter:mm. 800-1000-1200-1400 Variable speed:from 4 to 9 rpm/min Installed power:Kw. 0,18 Power supply:380V three-phase Standard height of the top with adjustable feet :mm. 810 (+/- 40 mm)

STANDARD MODELS WITH FREE ROLLER DIAM. MM 50 - PITCH MM. 75 FOR MEDIUM AND LARGE PACKAGES Roller conveyors consist of a sturdy structure profiled in painted steel, with supports legs fixable to the floor and adjustable in height, rollers in galvanized steel with rotation on shielded ball bearings. The roller conveyors are built according to the capacity and size of the boxes to be handled. Orderable length (mm) :500 - 1000 - 1500 - 2000 Main structure :heavy duty metal frames Rollers :galvanized steel with ball bearings Rollers diameter (mm) :48 Orderable width (mm) :500 - 650 - 800 - 1000 Load capacity (Kg/m) :70 - 55 - 50 - 70 Adjustable supports :2 (650-850 mm)

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:200 Kg

MOTORIZED STANDARD CONVEYOR TAPES WITH VARIABLE SPEED Motorized conveyor tapes are made of a structure in steel section with adjustable height supports and a smooth pvc carpet and a smooth pvc carpet moving on a sheet plane. They are used for the transport of boxes and packages in industrial and productive setting. They can be combined with weighing systems, counting, inkjet markers and used as transport systems and sorting boxes. If properly designed can also transport up/down hills Complete with motors of adequate power, electrical system and start/stop switch. The geared motor unit is installed inside of the supporting structure to limit the overall dimensions. The PVC carpet is full of guides and has the metal junction to make easier the disassembly, the cleaning to and the maintenance. The speed of tape is adjustable from 4 to 16 m/min by the convenient potentiometer. Tape :Green PVC smooth tape guided driven on the entire length and metal junction Width (mm) :300 - 500 - 650 - 800 Length (mm) :500-1000-1500-2000-3000-4000-5000-6000-7000-8000-9000-10000 Speed :Variable (from 4 to 16 m/min) Load :35 Kg/m Power supply :220V-1 ph

Rotating table for handling or storage of boxes, with large plan diameter 1500 o 2000 mm and capacity 200 kg. Robust. ROTATING ACCUMULATION TABLE - DIAMETER 1500 mm or 2000 mm The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packaging machines, facilitating the sampling operations by the operator. The table can be equipped with containing side rails and, on request, reinforced to carry heavy weights. OPTIONAL The plan may be made with customized table diameter and a different rotational speed.

Box weighing system to be integrated in manual idle lines When the box is positioned on the weighing station, the operator can read and check the weight of the products inserted in the box before placing it on the pallet and thus avoid errors or returns of the goods. In this way the operator can view the result of the weighing on the weight indicator without having to lift the packages to weigh them. The weight indicator is usually installed on a vertical post clamped to the structure of the roller conveyor. In this way the indicator remains positioned vertically and it is very easy for the operator to read the weight. The standard version foresees the installation of the basic DFWL indicator. On request it is possible to install the 7-key indicator also with DFWKPXP printer. The rollers used for the roller conveyors have a diameter of 50 mm and a pitch of 75 mm WE6x6:useful roller width 500 mm x roller conveyor length 600 mm - capacity 50 kg division 20 grams WE6x6T:roller useful width 500 mm x roller conveyor length 600 mm - capacity 50 kg division 10 grams WE8x8:useful roller width 650 mm x roller conveyor length 800 mm - capacity 150 kg division 100 grams WE7x7T:roller useful width 650 mm x roller conveyor length 700 mm - capacity 140 kg division 20 grams

PLANS BEARING DIAMETER 12 mm Suited to the handling of products with rigid bottom, allow to move with a push packages in any direction. Are normally used in semi-automatic lines where there are several discharge conveyors and the operator has to choose the direction that must take a specific product / package. The standard plans are made with ball diameters of 12 mm, wheelbase 37.5 in staggered rows. Structure:Painted sheet metal profile Galvanized support surface with seats for the spheres Adjustable supports:2 - Height from 650 to 850 mm 2 - Height from 650 to 850 mm:12 Orderable width (mm):500 - 650 - 800 Orderable length (mm):500 - 1000 - 1500 - 2000 Total lenght (mm):525 - 975 - 1500 - 1950 Load capacity (Kg):100 per module

ELECTRICAL ELEVATOR WITH FRONT TIPPING BY 85° FPLTM10E The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. Equipped with sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors. OPERATION: After braking the wheels, for lifting it is sufficient to press the button on the rudder which regulates the ascent and descent of the forks. The tilting is done by pressing the buttonhole located on the rudder, the UP button tilts the load to the operator, while the DOWN button will lower it again. Capacity:Kg. 1000 Max forks height (H):mm. 950 Min forks height (h1):mm. 85 Forks width (b):mm. 560 Forks lenght (l):mm. 800 Barycenter (C1):mm. 400 Frontal inclination:85° (at the rudder) Rudder height (L1):mm. 1138 Overall dimensions (BxLxL1):mm. 638 x 1325 x 1138 h.

CARTON SEALER MACHINE MOD. FP 9037 - UPPER AND LOWER BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake. Dimensions of the boxes to be taped (WxLxH):Min 200 x 150 x 100 mm Max 500 x unlimited x 500 mm Tape width:50 mm (75 optional) Type tape:Polipropilene - PVC Operation speed:20 m/min Belt drive:Upper/Lower

Cod. GELD 170 U/M Pz 170 grammi Descrizione Gelées doppia assortita in scatola regalo da 170 grammi.

BASE CARTON SEALER B52/B670/B820 Base for the closure of only the funds of boxes by means self-adhesive tape. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. The taping bases can be used both in semi-automatic lines with operator and in automatic lines or with box formers. The GEM B52 model is available in the version without guards for semi-automatic use or with side guards for insertion in the line. On the other hand, the B670F and B820F versions are only available with side protections for use in automatic lines or in combination with an automatic box former. The GEM B52 models can also be made of stainless steel. Example model:GEM B52 Boxes width min.:100 mm with 50 mm head/150 mm with 75 mm head Boxes width miax.:500 mm Boxes length:Min. 150 mm - max. unlimited Boxes height:Min. 100 mm - max. 500 mm Tape width:50 mm (75 optional)

The containters constructed in galvanized mesh, can transform the pallets in containers and resolved in a practical waytransport problems during processing and storage of finished products. They are also used as containers / exhibitors in stores. Are stackable, foldable and provided of frontal door for the removal of the content.Reported for transport by truck, in supermarkets and industry in general. Unified pallets EUR size mm. 800x1200 (mod. P8). The model P8 is in stock. Attention: the P8 and P10 containers are made of a metal structure and are equipped with a hook for fixing on wooden pallets. The wooden pallet is not included in the price. On order, for a minimum order of 100 pieces it is possible to have models P6 (800x1200x750h) and P10 (1000x1200x1000h). Example model:MOD. P8 (available) Load capacity:Kg. 800 Number of bottles stored horizontally:n. 432 Static stackability:3+1 Mesh:mm. 60x100 Finishing:Electrolytic bright zinc

The strapping machine with side head is recommended in all sectors in which, with traditional machines, processing residues such as grease, liquids, etc., cause operating problems. The SP92-E is suitable for products with minimum dimensions of 10x50x100 mm; uses strap with a width of 12 mm and a maximum thickness of 0.65 mm. Equipped with worktop with adjustable height and device for automatic shutdown, after 60 sec. of inactivity. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:140 Kg

Il nostro tamponamento in lamiera TLPE10 è adatto ad installazioni esterne ed è applicabile ai nostri castelletti R2 ed R4. La soluzione prevede una chiusura da esterno con pannellature cieche in acciaio zincato verniciato, con copertura totale delle traverse con i montanti a vista.

MODEL RG - FREE ROLLER-COATED DIAMETER 32 MM - PITCH 40 MM FOR SMALL AND FRAGILE PACKAGES Free rollers conveyors that consist of sturdy painted steel 2 mm thick, 50x25 mm tubular support, legs fixable on floor and adjustable in height, 32 mm diameter steel rollers coated with rubber, rotating on ball bearings (8mm axle). The versions with a width of 1000 mm consist of a 2-roller axis with central support. This solution allows to have a greater flow rate that reaches up to 90 Kg/m. Features:Free rubber-coated conveyors D30 P40 Orderable length (mm) :500 - 1000 - 1500 - 2000 Main structure :heavy duty metal frames Rollers :ball bearing steel, rubber coated Rollers diameter (mm) :32 Rollers pitch (mm) :37,5 Orderable width (mm) :500 - 650 - 800 - 1000 Load capacity (Kg/m) :75 - 60 - 45 - 90 Adjustable supports :2 (650-850 mm)

Automatic strapping machine mod. JN85-R with reduced welding plate (width mm. 27 instead of the standard mm. 60) for the automatic strapping of products with small size. Special machine designed to avoid issues in strap releasing in case of strapping of profiles, beams and small packages. The launch of the strap is operated with the foot control or the button. The strap is tighten, heat-welded and cut. The holding capacity of strap depends on material type and on strap choice. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:190 Kg

Cod. GEL 90 U/M Pz 90 grammi Descrizione Gelées semplici assortite in scatola regalo da 90 grammi. Scatola

Cod. TOR 01 Scatola da 20 pezzi di 250 grammi Cod. TOR 02 Scatola da 10 pezzi di 500 grammi Cod. TOR 03 Scatola da 5 pezzi di 1 kg Cod. TOR 04 Pezzo intero di 5 kg U/M SCATOLA Descrizione Torrone Morbido artigianale con Nocciola Piemonte IGP intera.

Horizontal ring wrappers with automatic hook/cut of the film and manual progress - Wrapping machines with rotating ring series RING BOX EVO with automatic hook/cut of the film automatic and manual advancement, for the packaging with stretch film of sections, bars, boards and products with elongated shape. Practical and economical, allow to lower operating costs thanks to low consumption of energy and materials. The introduction of the products to be packaged is manual and is made by sliding them on a idle roller conveyor. By a foot pedal, is carried out the winding of the film on the product to the desired time; at the end of the cycle, with a slight movement of the pack, is obtained the cold-cutting of the film. All operations are controlled by PLC. Example model:RING BOX EVO 70 Internal ring diameter:mm 700 Max. rectangular section:mm 550x300 Min. product lenght:mm 500 Max. product lenght:unlimited

Stapler BOTTOMER designed for closing the bottoms of the cardboard boxes. Available in mechanical (mod. MB) and pneumatic (mod. PB) versions. These staplers are suitable for small quantities or if you need to prepare the packaging in different areas. If you have to close 50 to 100 packages we recommend the use of a pneumatic stapler. Models MB and PB can use bar staples with width mm. 35 and depth mm. 15-19-22 Code points used: BT 35 in bar Operation:mechanical with footpedal or pneumatic 5-6 bar Staples type:In bars Charger capacity:200 staples Staples width:mm 35 Staples depth:mm 15-19-22

Cod. GEL 260 U/M Pz 260 grammi Descrizione Gelées semplici assortite in scatola regalo da 260 grammi.

Automatic strapping machine mod. TP 101, simple and reliable, is an excellent solution for strapping of packages handled by an operator. The positioning of the material to be strapped can be done manually or by means of an idle roller. The operator lunch the strapping by simply pressing the foot control or the start button. The strap is stretched, thermally welded and cut. The arch strap guide is in aluminum. The strapping tool is characterized by a new sealing blade for maximum effectiveness of the closure and an external knob to easily adjust the tension. Worktop with idle rollers. Operation with Mitsubishi PLC, the strapping machine turns off automatically after 60 seconds of inactivity. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:200 Kg

Manual stapler particularly robust, suitable for the top closure of cardboard boxes. Available in 3 models for staples with width mm. 35 and depth mm. 15-19-22 and is provided with a device for adjusting the depth of stitching. Charger capacity:100 staples Usable staples:35/15 - 35/19 – 35/22 (to be specified at time of order) Weight:Kg. 2,5