Termékek dzsekik (8)

The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades. Max. temperature of insulation:90 °C Outer Material:Silicone - coated fibreglass Insulation Material:Fibreglass Protection class:II Cable length:4 meters Type of cable:HO7RN-F with Schuko-plug Fastening:Quick-release buckles control:Capillary pipe thermostat | optional: digital Thermostat Control range:0 - 90 °C (optional: 0 - 40 °C) Heating zones:1 Special sizes possible:yes

Optimalisatie van de wereldwijde efficiëntie van een energiecentrale gebaseerd op de Rankine Cycle vereist de integratie van zeer gespecialiseerde apparatuur die de maximalisatie van de efficiëntie van de stoomcyclus ondersteunt, de vermindering van het primaire stroomverbruik, de minimalisatie van de milieu-impact en hulp bij het optimaliseren van de OPEX en bijgevolg het rendement op de investering. Door het sterk toenemende concurrentievermogen van de verschillende gecentraliseerde technologieën voor elektriciteitsopwekking en de toenemende zorg om het milieu moet de efficiëntie van alle beschikbare opwekkingstechnologieën worden verbeterd, zodat er minder primaire stroom wordt verbruikt.

SILCAPACK und SILCABLOCK sind Leichtbausysteme aus Fasermattenstreifen auf der Basis von Aluminiumsilikat und polykristalliner Wolle, die senkrecht zum Stahlmantel verlegt werden. Hieraus resultiert eine bürstenartige Faseranordnung mit hoher Abriebfestigkeit. Bei SILCAPACK handelt es sich um lose Fasermattenstreifen, die auf die Dämmschichtdicke der feuerfesten Auskleidung vorgeschnitten sind. Die SILCAPACK Streifen werden bei der Montage auf die gewünschte Rohdichte zusammengepresst und als Lamellenstreifen mit SILCADUR B90 Kleber auf Streckmetall verklebt. SILCABLOCK sind vorgefertigte Fasermodule, die auf Rohdichten von 130 bis 180 kg/m3 aus Fasermattenstreifen vorkomprimiert werden und mit Bändern, Kordel oder mit einem Gazegewebe eingefasst sind. Die Systeme können auf Grund ihrer Flexibilität sehr einfach jeder geometrischen Form des Stahlbaus angepasst werden, z. B. Rohrbögen, Rauchgasanschlüsse, Klöpperböden etc.

3 Knopf-Sacco mit dunkelgrünem Tuchkragen, Hirschhornknöpfen, sowie Knopf und Schlaufe auf beiden Schultern für Schulterstücke, zwei Pattentaschen und zwei Innentaschen.

We offer an extensive range of drum and barrel heaters and container heaters: Heating jackets, silicone drum heaters, base drum heaters and insulating but unheated drum jackets and lids for heating and insulating plastic and metal drums respectively containers. According to the destined application we use polyester, silicone, teflon and glass fibre for our drum heaters and container heaters. Some of the materials are coated and multi-layered resp. combined. Our drum heaters can be used individually and in combination and can be ordered and delivered online (shop.freek.de) for all standard drum sizes (25 / 50 / 105 / 200 litres). Of course, we also manufacture our heating jackets, heating sleeves, base heaters and insulating bonnets individually to fit your container and your special application. HC - Heating cabinets If you heat several drums or containers together or need a container heater for the ATEX area, the heating cabinets from our partner Amarc are the right choice.

The IBC/Bpro-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The container heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time. The IBC/B heating jacket can also be combined with the IBC/A container base heater. It's a silicone heater mat that is placed below the plastic container before that is filled. Max. temperature of insulation:90 °C Outer Material:Silicone - coated fibreglass Insulation Material:Fibreglass Protection class:II Cable length:4 meters Type of cable:HO7RN-F with Schuko-plug Fastening:Quick-release buckles control:Capillary pipe thermostat | optional: digital Thermostat Control range:0 - 90 °C (or 0 - 40 °C) Heating zones:2 Special sizes possible:yes

Lightest, most robust and efficient barrel heater jacket for steel&plastic drums - The HSHP – Drum Heater (220 °C) is suitable for steel drums (and with restrictions also for plastic drums). The outer material is a Teflon which is released for contact with food. The material possesses high levels of chemical and acid resistance. However, products such as waxes, soaps and materials with high water content can be heated excellently as well. The drum heating jacket is lightweight, robust and free of silicone. The excellent thermal transfer properties due to the perfect fit result in homogenous temperatures. Our silicone-free high-temperature drum heater is available in the standard size of 200 liters but can also be made to customer specification. Max. temperature of insulation:220 °C Outer Material:Waterproof PTFE Insulation Material:Fibreglass Protection class:II Cable length:4 meters Type of cable:HO7RN-F with Schuko-plug Fastening:Quick-release buckles control:Capillary pipe thermostat | optional: digital Thermostat Control range:0 – 40 °C, 0 - 90 °C at 1200 W | 0 – 120 °C, 20 – 220 °C at 1800 W Heating zones:1 (2 heating zones on demand) Special sizes possible:yes

The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles. Max. temperature of insulation:220 °C Outer Material:Silicone - coated fibreglass Insulation Material:Fibreglass Protection class:II Cable length:4 meters Type of cable:HO7RN-F with Schuko-plug Fastening:Quick-release buckles control:Capillary pipe thermostat | optional: digital Thermostat Control range:20 - 220 °C Heating zones:1 Special sizes possible:yes