Termékek egyéb gyógyszerek (747)

Uniformly wide polyurethane lamellae are attached in precisely established spacing while plastic foam lamellae are attached in the spaces between them to the aluminium hub of the frequency damped contact wheel FAPI-KS/V FREQUENCY DAMPED. The height of the coating resp. the length of the polyurethane and plastic foam lamellae can be varied depending on the application (standard: 25 mm). The positioning of the lamellae dampens the howling sounds in the upper frequency range in the contact wheel coating during grinding so that they are no longer audible to the human ear. The contact wheel FAPI-PUS/KS frequency damped achieves a significant reduction of the noise level in the workplace and so contributes its share to work safety. Benefits of contact wheels with polyurethane foam lamellae: Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.

Hiteco HF-Spindel 8.0 KW oder 36.000 rpm. HSK E40 Technische Daten: Leistung: 8000 Watt 380 Volt Drehzahl: bis zu 36.000 1/min 4-Polig Lüfterspannung 24 Volt Spannzange: HSK E40 Leistung: 8000 Watt Drehzahl: bis zu 36.000 1/min Spannzange: HSK E40

The contact wheel FAPI-VU MILLED is the addition to the smooth model. This is accomplished by milling grooves into the coating of lamellae of foamed up Vulkollan®. The overall height of the coating is also adapted to the respective application and is therefore variable. The grooves can be cut into the coating in various widths, depths and angles. Due to the grooves inserted, contact discs with a milled design are significantly more aggressive than contact discs with a smooth design. The aggressiveness effect of the contact disk can be optimized for each application through an optimal groove width-groove depth-web width ratio so that high-performance processes are possible. With this contact disc, too, no signs of fatigue occur after long, intensive use if used properly.The contact discs of the FAPI-VU series are exclusively provided with a coating made of foamed Vulkollan®. We will be happy to advise you in order to find a suitable contact wheel for you.

The contact disc FAPI-VU MILLED FREQUENCY DAMPED is the further development of the milled version. Grooves with a groove width-groove depth-web width ratio specially developed by us are milled into the contact disc’s foamed Vulkollan® covering. This reduces the noise level to a minimum during the belt grinding process and increases the removal rate to a maximum. The aggressiveness effect of the contact disk can also be optimized for each application using an individually optimized groove width-groove depth-web width ratio for milled, frequency-damped contact disks so that high-performance processes are possible. As with all contact discs in the VU series, there are no signs of fatigue after long, intensive use.The contact discs of the FAPI-VU series are exclusively provided with a coating made of foamed Vulkollan® by its slightly yellowish color. We will be happy to advise you in order to find a suitable contact wheel for you.

Hand-Blindnietmuttern-Setzgeräte Hebelgerät GO-520 konzipiert für:Blindnietmuttern / Blindnietschrauben Arbeitsbereich:M5 - M10 Antriebsart:Hand SKU:2290005200

Steckschlüssel mit Dauermagnet Form G - Außenflachkantantrieb, Aufnahme G7 Aufnahme:G7 Ausführung:Dauermagnet Werkstoff:Werkzeugstahl Schlüsselweite:1/4 SKU:5000500214

The FAPI–PA MILLED FREQUENCY DAMPED contact disc is the further development of the milled version. Grooves with a groove width-groove depth-web width ratio specially developed by us are milled into the NBR coating of the contact disk. This means that – during the belt grinding process – both the noise level is reduced to a minimum and the material removal rate is increased to a maximum. The total height of the covering can also be selected variably, with the standard height proven in practice being 20 mm. The higher the covering, the more elastic and therefore softer the contact disk surface appears. The contact disks are very aggressive when used due to the grooves they contain. The aggressiveness effect of the contact disk can also be optimized for each application with the milled frequency-damped contact disk by means of an individually optimized groove width-groove depth-web width ratio. We will be happy to advise you in order to find a suitable contact wheel for you.

Steckschlüssel mit Kugelsicherung Form E - Außensechskantantrieb, Aufnahme 1/4" Aufnahme:1/4 Ausführung:Kugelsicherung Werkstoff:Werkzeugstahl Schlüsselweite:1/4 SKU:5000405516

Pompe ausiliarie della serie TH e FH con le loro giranti chiuse raggiungono un ottimo rendimento. I modelli de la serie TH raggiungono pressioni elevate con una profondità di immersione ridotta. I modelli FH sono ideali come pompe ausiliarie con pressioni in entrata fino a 26 bar in combinazione con pompe nutrici o impianti centralizzati di refrigerante. Per particolari problemi di regolazione si possono impiegare convertitori di frequenza predisposti appositamente per la caratteristica della pompa, vedi Informazioni tecniche Comando/Regolazione. Portata volumetrica: fino a 640 l/min Prevalenza: fino a 520 m Prodotto pompato:per liquidi refrigeranti,per lubrificanti,per acque industriali Azionamento:elettrica Innesco:sotto carico Tecnologia:centrifuga Settore:industriale,per macchina utensile,per l'industria metallurgica Altre caratteristiche:compatta,multistadio,tandem,ad alta pressione,di alimentazione,per emulsioni,per fluido da taglio

Hiteco HF-Spindel 8.0 KW oder 24.000 rpm. HSK63 Technische Daten: Leistung: 8000 Watt 380 Volt Drehzahl: bis zu 24.000 1/min 4-Polig Lüfterspannung 24 Volt Spannzange: HSK 63 Leistung: 8000 Watt Drehzahl: bis zu 24.000 1/min Spannzange: HSK 63

Anschlagwinkel verz. 300 x 180 mm SKU:2233650030

Steckschlüssel mit Dauermagnet Form E - Außensechskantantrieb, Aufnahme 1/4" Aufnahme:1/4 Ausführung:Dauermagnet Werkstoff:Werkzeugstahl Schlüsselweite:1/4 SKU:5000400014

The contact wheel FAPI-PUS/KS is an extremely soft version of a contact wheel with a polyurethane foam and plastic foam lamella coating. The overall height of the coating must also be selected based on the respective application. The alternating polyurethane and plastic foam lamellae make the contact wheel extremely soft and particularly adaptable. In practice, this contact wheel is used mainly for the finishing of strongly cambered or rounded workpieces. Because of the different material densities and the spacing between the lamellae heat dissipates very well during the grinding process. Advantages The contact wheels of the FAPI-PUS – series are coated only with polyurethane foam lamellae. Benefits of contact wheels with polyurethane foam lamellae: Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.

A wide variety of very individual construction options are made possible with Vulkollan® coated components. Connections between Vulkollan® and metal can be easily created after the metal component has been pretreated. During this pretreatment, the surface of the component is cleaned and degreased using a sandblasting process. An optimal bond is then guaranteed by applying an adhesion promoter. The metal component (e.g. steel, aluminum, cast) takes on the function of the stable supporting body. The Vulkollan® coating meets high-performance requirements in terms of wear protection, damping and noise reduction. We would be pleased to advise you on which metal compounds can be used in your processing, in order to achieve top process results. Please note, other trim types are available upon request!

BZT HF-Spindel 1.1 KW oder 18.000 rpm. ER20, mit Steuerleitung Die Elektrospindeln erreichen hohe Drehzahlen, haben eine sehr schmale Form und benötigen nur einen kleinen Raumbedarf. Diese Hochtourigen Spezialmotoren sind für Holz, Aluminium und PVC Bearbeitungen geeignet. Diese HF-Spindel ist für Drehzahlen im Bereich von 12.000 bis 18.000 rpm ausgelegt. Technische Informationen: LÄUFER Käfigläufer nach den ISO 1940 Normen ausgewuchtet: standard Auswuchtungsgrad 2.5. BAUFORM Motor mit geschlossenem Aluminiumprofil-Gehäuse. LÜFTUNG Außenlüftrad. Leistung: 1100 Watt Frequenz: 300HZ Drehzahl: 12.000 - 18.000 1/min Gewicht: 5 kg Spannzange: ER 20

Hiteco HF-Spindel 8.0 KW oder 24.000 rpm. SK30 Technische Daten: Leistung: 8000 Watt 380 Volt Drehzahl: bis zu 24.000 1/min 4-Polig Lüfterspannung 24 Volt Spannzange: SK 30 Leistung: 8000 Watt Drehzahl: bis zu 24.000 1/min Spannzange: SK 30

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Horizontal cutter pumps Media:for coolant,for lubricants,for industrial water Operation:electric Priming:under load Type:centrifugal Domain:industrial,for machine tools,for the metallurgical industry Other characteristics:compact,multi-stage,with closed impeller,tandem,high-pressure,booster,for emulsions,cutting fluid

Uniformly wide lamellae of foamed up Vulkollan® are attached in precisely established spacing while plastic foam lamellae are attached in the spaces between them to the aluminium hub of the frequency damped contact wheel FAPI-KS/V FREQUENCY DAMPED. The height of the coating or the length of the lamellae of foamed up Vulkollan® and plastic foam can be varied depending on the application (standard: 25 mm). The positioning of the lamellae dampens the howling sounds in the upper frequency range generated during grinding so that they are no longer audible to the human ear. The contact wheel FAPI-KS/V FREQUENCY DAMPED achieves a significant reduction of the noise level in the workplace and so contributes its share to work safety. Advantages Because of their lamellae of foamed up Vulkollan® and plastic foam, contact wheels of the FAPI-KS/V – series are extremely aggressive contact wheels. We will be happy to advise you in order to find a suitable contact wheel for you.

BZT HF-Spindel 2.0 KW oder 18.000 rpm. ER20, mit Steuerleitung Die Elektrospindeln erreichen hohe Drehzahlen, haben eine sehr schmale Form und benötigen nur einen kleinen Raumbedarf. Diese Hochtourigen Spezialmotoren sind für Holz, Aluminium und PVC Bearbeitungen geeignet. Diese HF-Spindel ist für Drehzahlen im Bereich von 12.000 bis 18.000 rpm ausgelegt. Technische Informationen: LÄUFER Käfigläufer nach den ISO 1940 Normen ausgewuchtet: standard Auswuchtunggrad 2.5. BAUFORM Motor mit geschlossenem Aluminiumprofil-Gehäuse. LÜFTUNG Außenlüftrad. Leistung: 2000 Watt Frequenz: 300HZ Drehzahl: 12.000 - 18.000 1/min Gewicht: 7 kg Spannzange: ER 20

The contact wheel FAPI-PUS OPEN is a further development of the dense design. Here the aluminium core is coated alternately with a long and short polyurethane foam lamella. The overall height of the coating is also adaptable to the respective application and is therefore variable (standard: 35 mm). Because of the variant of the open design, the abrasive belt can better cool because the heat from the belt sanding process is better dissipated. Through the precise adaptation of the extremely soft running cushion to the workpiece that shoud be found it is possible to achieve high-performance results when finish grinding. Advantages The contact wheels of the FAPI-PUS – series are coated only with polyurethane foam lamellae. Benefits of contact wheels with polyurethane foam lamellae: Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.

Pneumatisch-Hydraulische Blindnietmuttern-Setzgeräte Blindnietschrauben Setzgerät - airPower 4 konzipiert für:Blindnietmuttern / Blindnietschrauben Arbeitsbereich:M3 - M10 Antriebsart:Pneumatisch SKU:2244000004

mit 3 Schlüsseln SKU:2233600010

Hand-Blindnietmuttern-Setzgeräte Hebelgerät GO-510 konzipiert für:Blindnietmuttern / Blindnietschrauben Arbeitsbereich:M5 - M10 Antriebsart:Hand SKU:2290005100

Hand-Blindnietmuttern-Setzgeräte Handzange GO-35 konzipiert für:Blindnietmuttern / Blindnietschrauben Arbeitsbereich:M3 - M6 Antriebsart:Hand SKU:2290000350

Sprühkleber zur Fixierung verschiedenster Werkstoffe Menge:1 SKU:2233561000

Hand-Blindniet-Setzgeräte konzipiert für:Blindniete Arbeitsbereich:3,0 - 6,4 mm Antriebsart:Hand SKU:2233064000

Hiteco HF-Spindel 3.6 KW oder 24.000 rpm. SK30 Technische Daten: Leistung: 3600 Watt 380 Volt Drehzahl: bis zu 24.000 1/min 4-Polig Lüfterspannung 24 Volt Spannzange: SK 30 Leistung: 3600 Watt Drehzahl: bis zu 24.000 1/min Spannzange: SK 30