El vario quick es un sistema de tope con topes de pieza estandarizados pero ajustables. Ahorra un tiempo valioso en la preparación del trabajo y es mucho más flexible. Porque siempre tendrá a mano la profundidad de sujeción necesaria, sin tener que fabricar los topes usted mismo.
La profundidad de sujeción de los topes/tornillos de sujeción se ajusta mediante un husillo roscado. Media vuelta corresponde a 1 mm de ajuste.
Los juegos pueden ampliarse individualmente con tornillos de tope y de pieza bruta disponibles por separado. El sistema de tope vario quick también se puede utilizar de forma estacionaria [es necesario taladrar la mesa]. Como alternativa, recomendamos nuestro sistema vario part.
An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas.
Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters.
Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.
Stroke Speed:4.500 min-1
Needles to be used:OD 2 x180 (66pcs.) or OD 3 x180 (28pcs.) or OD 4 x180 (14pcs.)
Air Consumption:0.35 m³/min
Mass (Weight):3.5 kg
Standard Accessories Needle OD 4mm x 180 mm:14 pcs.
Standard Accessories Needle Supporter OD 4mm:1 pc.
Standard Accessories Bushing:1 pc.
Standard Accessories Hose Nipple:1 pc.
Super efficient way of easyfiling, polishing and finishing
SUPER HAND replaces work.
SUPER HAND is ultrasmall, ultralightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs.
It comes with the quickchange tool points for different jobs. You can work on steel, glass, brass, aluminium, wood and other materials silently. It also handles scores of big jobs with speed and ease.
Stroke:4 mm
Stroke Speed:9,000 min-1
Air Consumption (No load):0.7 m³/min
Mass (Weight):0.4 kg
Standard Accessories Flat File SF-13:1 pc.
Standard Accessories 2.5 mm Hex. Socket Screw Key:1 pc.
Standard Accessories Bushing R 1/4 x NPT 1/4:1 pc.
Easy manual actuation
The TOROK manual chuck is primarily used in tool prototyping on machines without a clamping cylinder. For example, thanks to its easy manual actuation, when used on grinding machines you can safely and delicately clamp.
In combination with our clamping device adaptations, such as the MANDO Adapt mandrel-in-chuck or the jaw module, many more clamping options are possible.
Lightweight variant
And most recent: Thanks to the optional lightweight CFRP design, with the TOROK CFK you save one-third the weight. This is particularly set-up friendly and it offloads the machine spindle bearings.
Hecho para la industria del tallado de engranajes
Las soluciones de sujeción para la industria de tallado de engranajes son individuales y tienen requisitos muy especiales. Por eso es difícil encontrar el dispositivo de sujeción adecuado, sobre todo con un gran número de variantes y tamaños de lote pequeños. Uno se ayuda con dispositivos más o menos buenos.
Mandril de segmento estándar rígido y delgado
Esto ya es cosa del pasado. Con la MANDO G211 puede confiar en un mandril de sujeción de segmentos estándar con el que se beneficiará de los casquillos de sujeción de segmentos de stock. El perno de sujeción rígido y delgado con contorno de salida de herramienta optimizado es ideal para el tallado con fresa madre, pero también se puede utilizar para el tallado de engranajes o el rectificado de engranajes. Tres escalones de tope colocados de forma diferente cerca de la pieza de trabajo hacen posible el uso de topes de pieza de trabajo individuales y una conexión de lavado garantiza la
Easy manual actuation
The TOROK manual chuck is primarily used in tool prototyping on machines without a clamping cylinder. For example, thanks to its easy manual actuation, when used on grinding machines you can safely and delicately clamp.
In combination with our clamping device adaptations, such as the MANDO Adapt mandrel-in-chuck or the jaw module, many more clamping options are possible.
Lightweight variant
And most recent: Thanks to the optional lightweight CFRP design, with the TOROK CFK you save one-third the weight. This is particularly set-up friendly and it offloads the machine spindle bearings.
Pneumatic Tools - CBR-03
Capacity:3R
Chamfer Angle:n.a.
Air Consumption (No load):0.65 m³/min
Mass (Weight):2.2 kg including hose
Standard Accessories 3R inserts:2 pc
Standard Accessories Torx driver:1 pc.
Standard Accessories Insert Setscrew:1 pc
Standard Accessories Handle:1 pc
Para que el proceso sea seguro, preciso y productivo, es esencial controlar periódicamente la fuerza de sujeción y retracción. Hoy en día, nadie puede permitirse fabricar con "fuerzas de sujeción/retracción teóricas". A pesar de ello, la norma DIN EN 1550 exige que se realicen mediciones estáticas de la fuerza de sujeción a intervalos regulares. El dispositivo de medición de la fuerza de sujeción TESTit mide y registra la fuerza de sujeción externa e interna e incluso la fuerza de tracción de los útiles HSK.Sistema de medición modular
TESTit consta de dos partes: La unidad básica, el módulo IT, y las unidades de medición, los módulos TEST. El módulo IT sólo se necesita una vez, independientemente de si desea medir la fuerza de sujeción externa o interna o la fuerza de tracción. En función de la aplicación de medición, existen diferentes módulos TEST que puede conectar fácilmente al módulo IT mediante plug & play. Incluso los módulos TEST de diseño especial encajan en el módulo IT.
Spindle lock for the replacement of wheel
Plastic housing prevents cold hand
Built in governor
Wheel Size:OD 58 mm (2.1/4")
Free Speed (rpm):19.000 min-1
Air Consumption (No load):0.42 m³/min
Mass (Weight):0.6 kg
Standard Accessories Green Disc GS #80:1 pc.
Standard Accessories Hex. Socket Screw Key 5 mm:1 pc.
Standard Accessories Single Ended Spanner 19 mm:1 pc.
Standard Accessories Bushing RT1/4 x NPT1/4:1 pc.
Brushless screwdriver with wide torque range corresponds various fastening work
Brushless Motor
Equipped with a torque adjustment ring cover.
Reduced heat generation (startup current of the motor is constrolled to reduce unnecessary heat.)
Ecofriendly Adoption of green procurement parts, carbon dust free by use of brushless motor. Ecofriendly design by pursued cleanliness.
Robust and high durability realized by new body design using high strength plastic.
Pistol Grip DLW2300ESD is standard accessory of this model.
ESD (electrostatic discharge) protection compliant with IEC6134051.
Starting Method:Lever Start
Free Speed:650 min -1
Torque:3.80 - 7.0 Nm
Screw Size (Machine Screw):5.0 - 8.0 mm
Screw Size (Tapping Screw):4.5 - 6.0 mm
Mass (Weight):690 g (with Pistol Grip)
Voltage:40 V AC
Power Consumption:Approx. 44 W
Low compact angle head for good accessibility
Comfortable smaller diameter grip for maximum control
Side handle can be mounted to right or left
Spindle lock button makes replacement of depressed center grinding wheel easy
Wheel Size:OD 180 mm (7")
Free Speed (rpm):7.600 min-1
Air Consumption (No load):0.70 m³/min / 0.95 m³/min
Mass (Weight):2.5 kg
Standard Accessories Hex. Socket Screw Key 6 mm:1 pc.
Standard Accessories Hex. Socket Screw Key 10 mm:1 pc.
Standard Accessories Handle Ass'y:1 set
Standard Accessories Bushing R3/8 x NPT3/8:1 pc.
Are you tired of losing so much time due to change-over on your machining center? Then we have something for you. The DockLock zero-point clamping system in the hydraulic or pneumatic version. One clamping device quick change-over system for stationary applications. It allows you to change your clamping devices in two minutes. And with repeatability of ≤0.005 mm, without alignment.
A special feature: form fit clamping with a collet or clamping segments. That means a rigid clamping set-up and higher repeatability. This also prevents clamping marks on the clamping bolt as opposed to zero-point clamping systems with balls or sliders, which lead to inaccuracies and consequently to replacement of the clamping bolts. Likewise, no contamination and chips can get through, which ensures low-wear operation and reduces maintenance expenses.
From factory air line to pneumatic tool connection, available in various body materials, sizes and end configurations. Excellent durability.
An excellent general purpose coupling for connecting factory air supply to pneumatic tools.
Steel coupling is suitable for air. Brass or stainless steel are suitable for water. Note that fluid will come out from the plug when disconnected.
Critical structural parts of steel models are heattreated for increased strength giving greater durability and resistance to wear.
Available in various body materials, sizes and end configurations applicable to a wide range of applications.
Applicable Fluids:Air / Water
Working Pressure:10 bar / 15 bar
Valve Structure:Two-way shut-off / One-way shut-off / Straight through
Body Material:Brass / Stainless steel / Steel
Seal Material:NBR / FKM
Size:1/8 " / 1/4 " / 3/8 " / 1/2 " / 3/4 " / 1 "
With our hexagonal clamping heads you get up to 25 % more clamping force and higher output with the same clamping cylinder actuating force that is used to actuate our SPANNTOP chucks. The pyramid arrangement of glide surfaces makes it possible. In addition the hexagonal geometry ensures that TOPlus is more resistant to contamination than former clamping head / chuck systems.
Therefore, TOPlus is even better suited for raw material, cast and forged parts, as well as fine-particle non-ferrous metals such as brass. With a concentric precision of ≤ 0.005 mm!
Das TOPlus premium Spannfutter ist perfekt geeignet für hochpräzises Spannen sowohl von filigranen und dünnwandigen als auch von massiven und wuchtigen Teilen. Gepaart mit den dazugehörigen premium Spannköpfen und beim Spannen gegen den Anschlag profitieren Sie von einer Rundlaufgenauigkeit von sage und schreibe ≤ 5 μm.
Damit ist das Standard-Spannfutter TOPlus premium die bessere und kostengünstige Alternative zu Hydrodehn- und Membranspannmitteln. Neben der hohen Präzision erleichtert außerdem der große Öffnungshub die automatische Beladung der Maschine – selbst wenn der Roboter etwas ungenau arbeitet. Eine leichte Berührung mit dem Werkstück bei der Beladung macht dem TOPlus premium übrigens nichts aus. Es ist trotz der hohen Präzision »robust« und Ihr Prozess bleibt weiterhin stabil.
Das Beste aller HAINBUCH Futter!
The power and performance you need to drill deeper and faster
Buildin silencer
Reversible
Variable speed adjustment
Rubber grip reduces chilled hand
Max Drilling Capacity:6.5 OD mm
Free Speed:2.900 min-1
Air Consumption (No load):0.55 m³/min
Mass (Weight):0.8 kg
Rated Air Pressure:0.59 Mpa
Standard Accessories Drill Chuck:1 pc. on the body
Standard Accessories Chuck Handle:1 pc
Standard Accessories Bushing PT1/4 x NPT1/4:1 pc
Standard Accessories 3OSH:1 pc
Chamfering up to C3 stainless steel chamfering, and up to C7 mild steel chamfering.
Maximum R4 (R2, R3) for both stainless and mild steel
Rated Current:3,9 A
Chamfering Radius Capacity:2R, 3R, 4R
Capacity:0C ~ 7C
Chamfer Angle:15° ~ 45°
Voltage:220 V AC 50 Hz
Mass (Weight):3.9 kg
Rated Revolutions:Continuous
Indexable Insert with Hole 12.7:1 set
Carbon Brush Ass'y:1 set.
4 mm Hex.Wrench Key:1 pc.
Insert Set Screw 4x7:1 pc.
Hex.Nut M8:2 pc.
8x25 Hex.Socket Set Screw:2 pc.
Spanner T-15D:1 pc.
The A300 Auto Chisel is designed for speeding up the repair and sheet metal works of automobiles, etc. Being light and powerful, labor can be reduced remarkably.
This tool enables the work to be done in narrow space where ordinary hammering work is impossible. Thus the skill usually needed in hammering work is eliminated. The respective parts employ high material and are subjected to high precision process.
Stroke Speed (rpm):2.600 min-1
Air Consumption:0.3 m³/min
Mass (Weight):1.7 kg
Standard Accessories Bushing PT1/4 x NPT1/4:1 pc.
Standard Accessories Hose Nipple PT1/4 x 1/4:1 pc.
Standard Accessories Eye Protection:1 pc.
Depending on size, combined with all adaptations
5-axis machining or rational multiple clamping – with HYDROK we offer a hydraulically actuated stationary chuck that provides even more implementation possibilities. Depending on size – you can use it with all clamping device adaptations, such as the MANDO Adapt mandrel-in-clamping device or with the jaw module. Thus in the future you can also rely completely on the intelligent HAINBUCH modular system, even for your stationary clamping device.
Multiple clamping in confined spaces
The smallest of the group: HYDROK 40 SE and 32 RD. Their modular base plates can be easily fitted together and enables multiple clamping with incredible holding forces in the most confined spaces. And with an additional tandem cylinder you can even generate the full clamping force with a weaker hydraulic unit.
Sands to a clean finish and more in less time. Compact and light.
Light sanding with piston movement A compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation. Incorporates no gears and other complicated mechanisms
Paper Size:55 x 103 mm
Stroke:4 mm
Free Speed (rpm):4.000 min-1
Air Consumption:0.11 m³/min
Weight:0.75 kg
Standard Accessories Hose E Ass'y:1 set
Standard Accessories Bushing PT1/4 x NPT1/4:1 pc.
Standard Accessories Block Rubber Pad Ass'y:1 set
Standard Accessories Sandpaper #180:5 sheets
Standard Accessories Sandpaper #240:5 sheets
La misma fuerza de accionamiento, pero un 25 % más de fuerza de sujeción que los mandriles de expansión convencionales y, por tanto, un mayor rendimiento. Esto es posible gracias a las superficies de deslizamiento piramidales lubricables. Además, la geometría hexagonal garantiza un contacto de toda la superficie del cabezal de sujeción en el mandril y, por tanto, una insensibilidad a la suciedad significativamente mayor que con los sistemas de mandriles de cabezal de sujeción anteriores.
Por tanto, estos platos son aún más adecuados para piezas en bruto, fundidas y forjadas, así como para el corte fino de metales no férricos, como el latón. ¡Y todo ello con una concentricidad de ? 0,005 mm!
An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas.
Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters.
Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.
Stroke Speed:4.000 min-1
Needles to be used:OD 2 x 180 (53pcs.) or OD 3 x180 (23pcs.)
Air Consumption:0.27 m³/min
Mass (Weight):2.7 kg
Standard Accessories Needle OD 3mm x 180 mm:23 pcs. on the body
Standard Accessories Hex. Socket Screw Key 6 mm:1 pc.
Standard Accessories Bushing PT3/8 x NPT3/8:1 pc.
Standard Accessories Hose Nipple PT3/8 x 3/8:1 pc.
No problem to change-over from O.D. clamping to I.D. clamping
Change-over from O.D. clamping to perfect I.D. clamping, without changing the clamping device? No problem with MANDO Adapt: Place the mandrel in the mounted clamping device, tighten three screws, and lock the mandrel in the clamping device.
Reduce time
In this process the mandrel engages in the coupling of the clamping device via a sophisticated mechanism, where otherwise the clamping head engages. MANDO Adapt is attractive with extreme rigidity and precision.
Without adjusting
For rotating products, concentricity of 0.005 mm between chuck taper and mandrel taper can be achieved. For stationary clamping devices repeatability of 0.003 mm is possible. And best of all: This can all be accomplished without adjusting.
Smooth high speed rotation and low vibration enables precision grinding.
Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications.
Compact & light weight for comfortable operation over long periods of time.
Triangular grip fits operator's hand.
Special plastic grip prevents cold hands and absorbs vibration.
Rear exhaust system.
Collet Size:3 mm
Free Speed (rpm):56.500 min-1
Air Consumption (No load):0.17 m³/min
Mass (Weight):0.27 kg
Standard Accessories Bushing R1/4 x NPT 1/4:1 pc.
Standard Accessories Mounted Wheel 5 x 13 x 3:1 pc.
Standard Accessories Spanner 7:1 set
Standard Accessories Spanner 7 x 9:1 pc.
Variante ampliada con más posibilidades de sujeción
MANOK plus, la variante ampliada de nuestra mordaza manual MANOK, se diferencia por el uso de adaptaciones de sujeción. En combinación con, por ejemplo, el mandril MANDO Adapt o el módulo de mordazas para diámetros de sujeción aún mayores, le ofrece muchas más posibilidades de sujeción.
Versión ligera
Y lo último: gracias a la versión ligera opcional fabricada en CFRP, podrá ahorrar más de la mitad del peso de la MANOK plus CFRP. Estos pesos ligeros son especialmente adecuados para fresadoras y centros de mecanizado con pesos de carga reducidos. Además, protegen los componentes de la máquina, lo que en última instancia redunda en beneficio de la precisión de la máquina. Y cuando se cargan a mano o con el sistema de manipulación, a menudo hacen posible una solución con su bajo peso
The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH16 has many feature on the followings.....
Idle running proof structure adopted. No blowing without touching the work piece by the chisel.
Vibration on operation is reduced by low vibration structure. Especially effective on continuous operation.
Easy to handle, compact lightweight type and weight only one kilogram.
Stroke Speed (min-1):6.000 min-1
Overall Length:OD 10.5 mm
Air Consumption (No load):0.15 m³/min
Mass (Weight):0.9 kg
Standard Accessories Flat Chisel 20 x 120:1 pc. on the body
Standard Accessories Bushing PT3/8 x NPT3/8:1 pc
Standard Accessories Hose Nipple PT3/8 x 3/8:1 pc
Highly Maneuverable Tool
Compact and lightweight design for working in confined spaces. Locking throttle lever helps prevent accidental startup.
Wheel Size:OD 1", OD 1-1/2" and OD 2"
Free Speed (rpm):19.000 min-1
Air Consumption (No load):0.42 m³/min
Mass (Weight):0.6 kg
Enorme fuerza de sujeción
A menudo, el mecanizado completo falla debido a la falta de un dispositivo de sujeción interno sensato. En muchos casos, el mandril de garras es una solución provisional, pero incluso los mandriles convencionales con casquillos de sujeción ranurados alcanzan rápidamente sus límites en cuanto a precisión, rigidez y carrera de apertura. Esto contrasta totalmente con los mandriles HAINBUCH. Incorporan la tecnología de sujeción más moderna, que convence también en ámbitos de aplicación muy críticos.
Casquillo de sujeción con segmentos muy duros, resistentes al desgaste y rígidos
El elemento central es el casquillo de sujeción de segmentos vulcanizado. Un casquillo de sujeción convencional de acero para muelles sólo está templado y revenido a la dureza de un muelle, por lo tanto es blando, y debe "doblarse" para sujetar la pieza de trabajo. En cambio, el manguito de sujeción de segmentos HAINBUCH de acero al cromo-níquel cementado extremadamente resistente al des
Superlight, Quiet New lowvibration sander
Small and Lightweight for Comfort and Convenience
Free Sander fits the hand like a glove. It's humanengineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots.
Minimized Hand Vibration
The turbine motor of FS100C and the singleball air motor of FS50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.
Paper Size:100 x 110 mm
Orbit Diameter:OD 1.5 mm
Free Speed (rpm):20.000 min-1
Air Consumption:0.2 m³/min
Weight:0.5 kg
Standard Accessories Hose E Ass'y:1 set
Standard Accessories Bushing PT1/4 x NPT1/4:1 pc.
Standard Accessories Sandpaper #180:5 sheets
Standard Accessories Sandpaper #240:5 sheets
Change over from O.D. clamping to jaw clamping or centric clamping in 2 minutes – without clamping device change-over and without having to align ? No problem, with the jaw modules. Because the basic unit, into which the jaw module is inserted, is a HAINBUCH chuck or stationary chuck. If at times the clamping head reaches its limits because it must clamp a larger area, then use one of the jaw modules.
The 3-jaw module is best suited for round workpieces, and if you have cubic workpieces, then rely on the 2-jaw module. This means that for a large parts spectrum you are completely flexible and always have the solution that is ideally suited for the respective clamping situation.
Both are small, lightweight, and can be quickly changed over
– an ingenious solution for small-series production.