Termékek egyéb gyógyszerek (134)

Cazzuola a punta tonda Lama in acciaio Manico in bicomponente

PE-LD mortar box Also available in an iron-reinforced version both on the long sides and on the handles Capacity:10lt Capacity:25lt Capacity:30lt

Painted steel hay rake. Reinforced. 20 tines. Socket diameter: Ø28mm.

Barre à mine hexagonale en acier forgé et trempé. Revêtement en poudre époxy noir. Longueur:1200mm / 1500mm / 1750mm / 2000mm

Steel try square, single piece cut with laser. Painted with red epoxy powder. Size:40cm / 50cm / 60cm / 80cm / 100cm

Steel tower pincer Epoxy powder coating Polished head In accordance with DIN ISO 9242 Lenght::200mm / 220mm / 250mm / 280mm

Hardened mud scraper. Sturdy socket. Socket diameter: Ø35mm. Lenght:45cm / 50cm

Cutter autobloquante 18mm Avec guide-lame en métal Poignée en caoutchouc antidérapante Emballé sous lister Dans des boîtes colorées de 50 pcs.

Rastrello a denti curvi in acciaio verniciato. Con canna conica. Spessore: 4mm. Diametro della canna: Ø28mm. Denti:12 / 14 / 16 / 18 / 20

Cazzuola a punta tonda larga Lama in acciaio Manico in bicomponente

Three-component sledgehammer handle with fiberglass core and soft rubber grip for sledge hammer, stoning hammer and splitting maul Length: 90cm Size: 49x35mm For paired, gem and log splitter hammers cm:90

Platoir type allemande lisse ou denté idéale pour les travaux de finition, de stuc et de construction en général Manche en bois à deux mains électrosoudé

Zappascure tipo solito in acciaio forgiato temprato Peso: 1800gr Occhio ovale Manico in legno di faggio Lunghezza del manico: 90cm SKU:86018IL

Pelle ronde à col de cygne en acier embouti trempé Dimensions:25cm / 27cm / 29cm

Tenaglia da cementista marca WIHA Leveraggio sovrapposto con cerniera, elevata resistenza Lama ad alta efficienza con grande potenza di taglio e bassa forza necessaria grazie alla lavorazione di alta precisione Lunga durata grazie alla tempra ad induzione supplementare delle lame fino a circa 64 HRC In acciaio per utensili C 70 di qualità, bonificato A norma DIN ISO 9242

Cazzuolino a lingua di gatto Lama in acciaio Manico bicomponente in plastica con impugnatura in gomma

Forca vangare 4 denti triangolari Colore: blu SKU:60413I

Faucille à herbe lame lisse demi-large. Forgée. Avec protection de la lame. Largeur de travail environ 20cm.

Forca 4 denti Colore: blu SKU:60200

Regrindable pointed chisel in chrome vanadium steel. Special hardening on the tip that allows it to be re-sharpened without further treatments. Structural strength increased by the ribs. Round section 16mm. Size:250mm / 300mm / 350mm / 400mm

Curved steel brush Brass-plated steel wires Ergonomic plastic handle

Coin à bois en acier forgé et trempé. Verni à poudre époxy. Poids:1000gr / 1500gr / 2000gr / 2500gr / 3000gr

Livella rettangolare in alluminio pressofuso Con maniglie Base fresata Trattamento superficiale di sabbiatura e verniciatura a polvere epossidica Sezione: 47mm x 23mm Tolleranza di misurazione: 0,043” – 0,75 mm/m

Fourche à fumier 4 dents forgée. Pièce unique. Couleur or.

Piccone in acciaio forgiato e temprato da 2kg e 2,5kg Occhio tondo Manico in tricomponente Lunghezza del manico: 90cm

Piccone in acciaio forgiato e temprato Occhio ovale Peso: 1,5kg Manico in tricomponente Lunghezza del manico: 90cm SKU:37315F

Piccone in acciaio forgiato e temprato Occhio ovale Peso: 1,5kg Manico in legno di faggio Lunghezza del manico: 90cm SKU:37315L

Martellina Malepeggio in acciaio forgiato temprato. Verniciatura a polvere epossidica. Manico in tricomponente con anima in fibra di vetro e impugnatura gommata. Lunghezza del manico: 37cm. Peso:300gr / 400gr / 500gr / 700gr Manico:Senza manico / Con manico in legno / Con manico in fibra

Rinfor Grout Col is a special cementitious formulation, being fibre-reinforced with READYMESH technology, enriched with reactive microsilicates with very high pozzolanic activity and special crystalliser additives that increase the end result and the durability. Mixed with water, it is able to forge micro-concretes with pourable rheology. Once hardened, the product offers exceptional physical-mechanical and ductility values. Ideal for the reinforcement and seismic adaptation of flooring in reinforced concrete, brick-concrete or corrugated sheeting or wood, by constructing a thin extradoxal structural screed along with beams, pillars, structural crosspoints and walls, by means of suitable liners. The rheological and physical-mechanical characteristics of the Rinfor Grout Col product render it extraordinarily effective in reinforcing structural elements in reinforced concrete and masonry. Adhered to the inside of caissons, confined within cavities or spread out over the extrados of foundations and lofts, Rinfor Grout Col allows for low thickness structural reinforcing, substantially devoid of additional metallic reinforcement. Rinfor Grout Col belongs to the HPFRC (High Performance Fibre Reinforced Concrete) family, permitting the structural designer to make use of the following characteristics: - Exceptional resistance and traction as well as exceptional values of shear stress adhesion on various supports which have been suitably roughened; - advantages in structural calculations prescribed for fracture mechanics, resistance to traction and of the ultimate material deformation; - minimum thicknesses applied with reinforcing effects which have been distinctly improved as against interventions with traditional reinforced concrete; - highly notable reduction of mass and minimizing of additional loads applied for structural reinforcing as against interventions with traditional reinforced concrete (practically nil additional loads in the case of the thickness of the coating corresponding with the depth of sacrificed surface); - anti-carbonatation barrier (practically zero penetration of CO2) and anti-oxidant barrier; - auto-healing of any micro-fissures exposed to contact with fluids, thanks to the particular crystallising additives; - increment of durability of the structures repaired with Rinfor Grout Col, thanks to the migration effect of the crystallising additives; - very high resistance to fire; - eco-sustainability - made up of 100% mineral and metallic materials, totally recyclable at end of life. From the environmental point of view, the Rinfor Grout Col product is characterised by the following advantages: - Ecological packaging (card-cardboard) - product based on hydraulic binders, selected aggregates and mineral additives with content of organic raw materials < 1% - practically nil VOC emissions during installation; once hardened, nil VOC emissions. - containing a fraction > 5% of sub-products from the production industry 100% recyclable at end of life. For seismic adaptation with absorption and transfer of pressure or traction during events with elevated dynamic forces (seismic, impacts, deflagration); - for structural reinforcing and seismic upgrading through coating of beams, pillars structural ties, walls; - for reinforcing and seismic upgrading with external, low thickness, structural screed for lofts in reinforced concrete, concrete masonry, corrugated sheeting, wood;
 - for fabrication of light, thin section, structural elements
; - for the repair of flooring with need for resistance against elevated static and dynamic stresses, together with exceptional values of resilience and resistance to impacts; - for reinforcing and precision anchoring of heavy and highly stressed machinery: E.g. wind turbines, turbines, precision machinery, etc. The support must be in good condition, clean, sufficiently coarse, without crumbling parts or dust, pressure washed and saturated with water before application. With concrete, the abrasiveness of the support must be > 3mm; to obtain this level of coarseness, techniques of hydro-scarifying, bush-hammering, mechanical chiselling, sand blasting with large grain may be considered. With the case of surfaces in strongly absorbent brick-work (lofts in brick cement with surfacing of parts in brick) or in the case in which it is impossible to saturate the support with water, contact our technical services to evaluate suitable adhesion primers, such as Syntech Pavisheer or Syntech RGS. Above all, when used as a surface covering of lofts in concrete, or as a repair to industrial flooring, providing anchoring roots by drilling the support is particularly useful for increasing resistance to cuts and adhesion to the support (diameter 18-20 mm, depth 20 mm), and accurately cleaning the surfaces of the holes before spreading the Rinfor Grout Col.

Plantoir en acier peint Avec capuchon en plastique pour éviter les blessures à la paume de la main Avec trou, peut être accroché