Termékek egyéb gyógyszerek (9415)

ENOVATOOL umfasst ein breit aufgestelltes Portfolio verschiedenster Werkzeuge für die professionelle Anwendung. Hinzu kommen Highseller-Produkte, die insbesondere aufgrund ihrer Eignung auf dem B2B-Markt überzeugen.

Unsere Konstruktionsabteilung entwirft Projekte mithilfe professioneller Software und in enger Zusammenarbeit mit unserem eigenen Werkzeugbau.

X2000NC for producing door strikers Modular tool set on an X2000NC line for the production of door strikers from 8 mm wire. Striker sprinter tool, 3 stations, 2 m back wall, feeding of coil material via NC roller infeed, cycle output: approx. 60 pcs/min, ready-to-use, weight approx. 10 t Door striker production With these specifications, our X2000NC is the world’s fastest system for the production of door strikers for the automotive industry. With tool changes, different striker shapes can be achieved, as well as processing details such as upsetting or tapering at wire ends. Our one-of-a-kind production model enables cycle times of more than 60 pcs/minute. For this reason, we’d prefer not to share the technical details of our strategy online. If you’re interested, please arrange a meeting with a member of our field sales team. Incidentally, we also build assembly systems for coupling door strikers to striker plates.

High performance simultaneous 5 axis mill turn center The STC series has been designed to provide unrivalled economy in the machining of the most demanding structural parts, multiblades and casings with long cycle times, and provide the customer with a whole host of practical options. These machining centers have excellent static and dynamic properties as well as a tried and tested rotatable head, making them the benchmark for heavy chip removal in titanium and Inconel part for the aerospace and power generation industries. Pallet clamping surface according to DIN 55201:mm 1250x1800 (1600x1800) Max. workpiece weight:kg 12000 Column linear travel X:mm 3400 Main spindle vertical travel Y:mm 1900 Table traverse travel Z:mm 2450 Swing diameter:mm 2800 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Motor spindle 1, max. Speed:rpm 15000 Max. power at 100% duty cycle:kW/Nm 70/230 Total taper:HSK-A100 Motor spindle 2, max. Speed:rpm 24000 Max. power at 100% duty cycle:kW/Nm 70/60 Total taper:HSK-A63 Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 67 Space requirement for basic machine LxWxH:mm 15900x10500x5450

PE (Polyethylene) PE (Polyethylene) 16x100mm Winged Tube Cap is a tube cap produced from PE (Polyethylene) material, with dimensions of 16x100 mm. The Winged Tube Cap 16x100 mm is a secure and leak-proof cap specifically designed for 16x100 mm tubes used in laboratory environments. Its winged structure provides ease of attachment and removal, offering practicality in laboratory procedures. This cap, presented sterile, helps in safely preserving samples and protecting them from external factors. Especially prominent in microbiological and chemical analyses due to its leak-proof feature, this cap minimizes the risk of sample contamination and is made from high-quality material. Product Code: AKL-105

Sophia Misure:5.5 Acciaio, acciaio giapponese, acciaio cobalto. Le forbici Pinin nascono dalla forgiatura e dalla temperatura dell’acciaio con lo scopo di realizzare uno strumento che possa durare nel tempo.

PS (Polystyrene) 90 mm 90 mm Divided Petri dish, made of PS (polystyrene), is a Petri dish with aseptic features. Product Code: AKL-801

La "Herramienta de control de espuma L663 Fender & Bonnet" es una máquina diseñada para verificar la presencia de espumas en las piezas L663 Fender y Bonnet mediante el uso de visión artificial, presionar las espumas sobre las piezas y sacar las piezas de sus camas en la máquina para facilitar la operación de extracción realizada por el operador.

APPLICATION Fraise pour percer, rainurer et tailler des matériaux à base de bois revêtus, plaqués et non revêtus tels que les panneaux de particules, le contreplaqué et le MDF. INFORMATIONS TECHNIQUES Fraise avec corps en acier et dents brasées en diamant polycristallin (PCD). Avec un angle de cisaillement alterné et des pointes de disposition pour assurer une excellente finition des bords des panneaux de cabine et une bonne élimination des copeaux. Pointe plongeante en carbure de tungstène brasé (HW) pour le perçage. Il peut être réaffûté 8 à 10 fois. MACHINE Pour machines CNC, défonçeuse stationnaires, etc.

Jeanne Misure:5.5|6.0 Taglio regolare:30% Taglio scivolato:70% Acciaio, acciaio giapponese, acciaio cobalto. Le forbici Pinin nascono dalla forgiatura e dalla temperatura dell’acciaio con lo scopo di realizzare uno strumento che possa durare nel tempo.

Formteilautomat zur EPS-Verarbeitung bis maximal 1,5 bar

Extended variant with many more clamping possibilities MANOK plus, the extended variant of our manual MANOK stationary chuck differs through use of adaptation elements. For example, many more clamping possibilities are available to you in combination with the MANDO Adapt mandrel-in-chuck or the jaw module for even larger clamping diameters. Lightweight variant And most recent: Due to the optional lightweight CFRP design, with the MANOK plus CFK you can save half of the weight. The lightweights are easy to set-up and particularly well-suited for milling machines and machining centers with small load weights. Plus they protect machine components, which ultimately helps the machine accuracy. When loading manually or with a handling system, often the only possible solution is a lightweight stationary chuck.

YEARLY SUBSCRIPTION Receive monthly updates on your VT56 TPMS tool with the annual software subscription including the latest and greatest features and coverage. The latest software update subscription also includes new tool functionalities, procedures, corrections, vehicle coverage, sensor coverage and more. New vehicle and OE/Aftermarket sensor coverage added each month Access to new features & functions Subscribe to receive a tech release email for each release Update the tool as many times as needed with the annual subscription PN:SW56-0001

Material: aluminium alloy Surface treatment: machining surface Tolerance: ±0.02 Machining method: cnc milling Usage: small mold

Rinfor Grout Col is a special cementitious formulation, being fibre-reinforced with READYMESH technology, enriched with reactive microsilicates with very high pozzolanic activity and special crystalliser additives that increase the end result and the durability. Mixed with water, it is able to forge micro-concretes with pourable rheology. Once hardened, the product offers exceptional physical-mechanical and ductility values. Ideal for the reinforcement and seismic adaptation of flooring in reinforced concrete, brick-concrete or corrugated sheeting or wood, by constructing a thin extradoxal structural screed along with beams, pillars, structural crosspoints and walls, by means of suitable liners. The rheological and physical-mechanical characteristics of the Rinfor Grout Col product render it extraordinarily effective in reinforcing structural elements in reinforced concrete and masonry. Adhered to the inside of caissons, confined within cavities or spread out over the extrados of foundations and lofts, Rinfor Grout Col allows for low thickness structural reinforcing, substantially devoid of additional metallic reinforcement. Rinfor Grout Col belongs to the HPFRC (High Performance Fibre Reinforced Concrete) family, permitting the structural designer to make use of the following characteristics: - Exceptional resistance and traction as well as exceptional values of shear stress adhesion on various supports which have been suitably roughened; - advantages in structural calculations prescribed for fracture mechanics, resistance to traction and of the ultimate material deformation; - minimum thicknesses applied with reinforcing effects which have been distinctly improved as against interventions with traditional reinforced concrete; - highly notable reduction of mass and minimizing of additional loads applied for structural reinforcing as against interventions with traditional reinforced concrete (practically nil additional loads in the case of the thickness of the coating corresponding with the depth of sacrificed surface); - anti-carbonatation barrier (practically zero penetration of CO2) and anti-oxidant barrier; - auto-healing of any micro-fissures exposed to contact with fluids, thanks to the particular crystallising additives; - increment of durability of the structures repaired with Rinfor Grout Col, thanks to the migration effect of the crystallising additives; - very high resistance to fire; - eco-sustainability - made up of 100% mineral and metallic materials, totally recyclable at end of life. From the environmental point of view, the Rinfor Grout Col product is characterised by the following advantages: - Ecological packaging (card-cardboard) - product based on hydraulic binders, selected aggregates and mineral additives with content of organic raw materials < 1% - practically nil VOC emissions during installation; once hardened, nil VOC emissions. - containing a fraction > 5% of sub-products from the production industry 100% recyclable at end of life. For seismic adaptation with absorption and transfer of pressure or traction during events with elevated dynamic forces (seismic, impacts, deflagration); - for structural reinforcing and seismic upgrading through coating of beams, pillars structural ties, walls; - for reinforcing and seismic upgrading with external, low thickness, structural screed for lofts in reinforced concrete, concrete masonry, corrugated sheeting, wood;
 - for fabrication of light, thin section, structural elements
; - for the repair of flooring with need for resistance against elevated static and dynamic stresses, together with exceptional values of resilience and resistance to impacts; - for reinforcing and precision anchoring of heavy and highly stressed machinery: E.g. wind turbines, turbines, precision machinery, etc. The support must be in good condition, clean, sufficiently coarse, without crumbling parts or dust, pressure washed and saturated with water before application. With concrete, the abrasiveness of the support must be > 3mm; to obtain this level of coarseness, techniques of hydro-scarifying, bush-hammering, mechanical chiselling, sand blasting with large grain may be considered. With the case of surfaces in strongly absorbent brick-work (lofts in brick cement with surfacing of parts in brick) or in the case in which it is impossible to saturate the support with water, contact our technical services to evaluate suitable adhesion primers, such as Syntech Pavisheer or Syntech RGS. Above all, when used as a surface covering of lofts in concrete, or as a repair to industrial flooring, providing anchoring roots by drilling the support is particularly useful for increasing resistance to cuts and adhesion to the support (diameter 18-20 mm, depth 20 mm), and accurately cleaning the surfaces of the holes before spreading the Rinfor Grout Col.

90 mm Petri Dish | 20 ml IVD | Sterile | pH 7.1 ± 0.2 10-Pack Vacuum Packaging Storage 2-12 °C Shelf Life 3 months Bile Esculin Agar (Bile Esculin Medium) is a culture medium used for the identification of Enterococcus species and the differentiation of Streptococcus bovis from other groups of streptococci. Product Code: AKL-191

Decoupe Du Polystyrene - COUTEAUX INTERVENANT DANS LA COUPE DE L’ISOLANT : LAINE DE VERRE, LAINE DE ROCHE

Les produits usinés pour le secteur de l'énergie nécessitent une précision et une fiabilité exceptionnelles, et c'est exactement ce que JMTEC offre. Nous comprenons les exigences uniques de cette industrie et nous nous engageons à fournir des composants qui répondent aux normes de performance les plus élevées. Nos produits sont conçus pour résister aux conditions les plus difficiles, garantissant ainsi une durabilité et une efficacité maximales. En collaborant avec JMTEC, vous bénéficiez d'une expertise inégalée et d'un engagement envers l'innovation. Nous travaillons en étroite collaboration avec nos clients pour développer des solutions sur mesure qui répondent à leurs besoins spécifiques. Que vous ayez besoin de pièces pour des applications de production d'énergie renouvelable ou traditionnelle, nous avons les compétences et l'expérience nécessaires pour vous fournir des produits de qualité supérieure.

Unsere Halbautomaten für Kabel bieten Ihnen maßgeschneiderte Lösungen für Ihre spezifischen Anforderungen. Mit modernster Technologie und Präzision fertigen wir Kabel, die speziell für Anwendungen entwickelt wurden, die eine hohe Präzision und Effizienz erfordern. Unsere Halbautomaten sind ideal für Projekte, die eine hohe Flexibilität und schnelle Reaktionszeiten erfordern. Dank unserer zentralen Lage in Deutschland können wir schnell auf Ihre Anforderungen reagieren und maßgeschneiderte Lösungen bieten, die genau auf Ihre Bedürfnisse zugeschnitten sind. Egal, ob Sie kleine oder große Stückzahlen benötigen, wir sind bereit, Ihre Anforderungen zu erfüllen und Ihnen zu beweisen, dass wir Ihr Spezialanbieter für außergewöhnliche Konfektionslösungen sind.

Universal female matrix mostly using major Braille fonts currently in use throughout Europe. Tooling completeted in 1 or 2 passes embossing and die cutting operation.

Pneumatic parallel gripper with 2 concentric fingers and long opening stroke. Very long prismatic guide for torsional torque resistance. Exceptional length/stroke ratio Interest of longstroke parallel grippers These pneumatic parallel grippers with long opening stroke can seize parts with very different sizes (example a range of bearings, a range of wheels …). The length of the sliders makes it possible to support fairly long jaws without the risk of buttressing. Exceptional length/stroke ratio and robustness The clamping force and guiding quality are constant throughout the stroke. The slides being mounted in parallel, these grippers have a very good stroke/length ratio. With a hard anodized body, a long prismatic steel guide, these parallel pneumatic grippers are reliable and robust. Mounting interfaces allow them to be integrated into a pneumatic handling assembly. Model:251 to 257 Effective clamping force (at 6 bars):60 to 990 N Stroke (2x stroke for each finger):2x 12 to 2x 120 mm Advised max. weight part:0,5 to 12 kg

with its compact design using a structural aluminum profile, conveyor system is ideally suited for continuous duty applications in multiple shift environments. using the benefits of modular construction, this conveyor can be readily integrated into new or existing equipment or be used as a freestanding conveyor for bulk handling and loading aplpications. inclination smoothly adjustable steplessly fourwheel drive, 2 steering wheels with parking brake 13 collector rollers, height 20 mm transport cover PUeven, 2 layers, to be used at temperatures from 30 120°C, oiland grease resistant, antistatic funnel (attachment), aluminium anodized drop area pivotable clip/aluminiumclosed bar system suitable for materials to be conveyed from a thickness of 2 mm on for lower thicknesses of materials to be conveyed, allaround corrugated material edges made from celloflex. This reduces the usable width of the material by approx. 70 mm

Stackable and connectable with Classic-Line and T-Loc systainer® Consisting of systainer® III housing with 3 x medium drawer (dimensions: approx. H 34 x W 167 x D 255 mm) 6 x small drawers (dimensions: approx. H 34 x W 78 x D 255 mm) Incl. label set and 2 dividers per drawer for custom organisation Additional dividers and label sets available as accessories Clear organisation of small components and fast access * The exterior dimensions are measured without the feet: H + 5 mm 3 x drawer medium 6 x drawer small Outside dimensions H* 210 x W 400 x D 300 mm Weight: 5,50 kg * The outside dimensions are measured without feet: H + 5 mm Colors:individually adaptable Customization:we help you finding the perfect solution for your products

Furet électrique déboucheur de canalisations Diamètres d'utilisation : Ø50 à Ø2 - Avec le déboucheur électrique dernière génération, et son set de têtes vous venez à bout des dépôts et des bouchons les plus coriaces. En effet, vous serez capable d'éliminer les cheveux, les détritus ou encore les graisses. L'intervention est mécanique, rapide et surtout elle n'endommage pas les canalisations à terme par l'usage d'ingrédients chimiques et corrosifs. Un compartiment a été spécifiquement prévu pour le rangement de vos accessoires, ainsi vous les avez à portée de main et vous trouvez facilement l'embout adéquat. La clef de séparation vous aide à inter-changer rapidement vos têtes de nettoyage ou à raccourcir la longueur des spirales. Des gants et le tuyau recouvrant la spirale sont prévus pour vous assurer une protection optimale lors de votre intervention.

Estech dispose d'atelier d'usinage avec des moyens de production importants tel que l'usinage numérique 5 axes

Für unsere Kaltumformung verwenden wir moderne hochglanzpolierte und beschichtete Umformwerkzeuge. Dadurch erreichen wir hohe Genauigkeiten. Einige Beispiele für Conform® Präzisionsteile: Antriebswellen für Elektromotoren kleiner bis mittlerer Baugröße, z. B. für Scheibenwischer Fensterheber Sitzverstellung Lagerbuchsen Rastbolzen ABS-Funktionsteile ESP-Funktionsteile

• Die Elektroinstallationszange • Mit 4 Funktionen: Schneiden - Abisolieren - Verpressen - Biegen • Mit Abisolierfunktion für ein- und mehrdrähtige Leiter mit 1,5 mm² und 2,5 mm² Leiterquerschnitt • Schneiden zusätzlich induktiv gehärtet • Präzisionsschneiden für feinste Drähte • Kraftgewerbe mit optimaler Hebelübersetzung für einfaches und ermüdungsarmes Arbeiten • Griffe mit ergonomisch geformten SoftGripp Mehrkomponenten-Hüllen • SoftGripp Griffe mit SystemSocket zur Aufnahme von optional erhältlichem Zubehör, wie z.B. dem einfach aufzuschiebenden SystemClip zur Absturzsicherung • Aus Spezial-Werkzeugstahl, geschmiedet, ölgehärtet Länge in Millimeter:190 Gewicht in Gramm:245

HSS material such as drill bits, milling cutters, screw taps, threaded eyes, radeco, boring machines, circular saws and pieces from them

Precise positioning Mechanical | Pneumatic

ROLLING MILL MANUFACTURING