Termékek egyenleg (13)

Vitoni di bilanciamento

100% Arabica for a sweet and well balanced coffee with rich aroma.

Armarock B50 The Armarock B50 basalt mesh is a material with a leno structure, formed by elastic ribs of high-strength basalt threads, fixed in the nodes with a stitching thread, with the formation of square cells, the size of which is ideal for use with FRCM mortars. The mesh is treated with special compounds to improve alkali resistance properties and increase its stability. Balanced biaxial mesh in alkali-resistant basalt fibre, specific for strengthening and repairing structural elements. The main properties of Armarock B50 are: excellent tensile strength high dimensional stability stable against cyclical stresses easy to install, light, compact adaptable to the shape of the support cuttable into the desired dimensions and widths resistant to aggressive environments, especially alkaline ones. Ideal in combination with cement or lime-based mortars for FRCM and CRM applications. Bidirectional reinforcement in alkali-resistant basalt fibre, pre-primed, to be used in combination with our mortars (Unisan, Intosana, Repar line), GFRP connectors (Armaglass Connector line), stainless steel connectors (Helix Steel Aisi 304 line) , for the "reinforced" structural reinforcement of masonry and reinforced concrete products with CRM and FRCM techniques. Anti-tipping systems for partition walls and cladding. Structural reinforcement of arched and vaulted wall elements, both at the extrados and intrados. Reinforcement for reinforcing plastering to be created in historical and monumental contexts, capable of more uniformly distributing the stresses induced by seismic events, without substantial changes in the distribution of masses and stiffness. To prepare the support, carefully follow what is indicated in the technical data sheets of the product with which the Armarock B50 mesh is combined. In general, in the case of reinforcements of masonry males or intrados/extrados of vaults and arches, it is necessary to proceed with the complete removal of the existing plaster, manually or with mechanical tools, and of all possible inconsistent or detaching parts, up to get to the heart of the masonry and obtain a healthy, compact and mechanically resistant support. Wet the support to be strengthened; the excess water present on the surface must be allowed to evaporate so that the masonry to be strengthened is saturated with water but with a dry surface. Application with a flat metal trowel or spray of a first uniform layer of approx. 5-6 mm of mortar (Unisan, Intosana or Repar line) chosen according to the characteristics of the support. At the same time as applying the first layer of mortar while it is still fresh, position the Armarock B50 mesh, compressing it with a flat trowel, so that it penetrates the applied mortar. Adjacent nets must be overlapped by at least 10-15 cm. Application of a second layer of mortar on the previous one while it is still fresh, in such a way as to completely cover the mesh and reach the desired thickness. In the case of anti-tipping systems, the recommended overall mortar thickness is approximately 10 mm. In the case of reinforcement of arches or vaults, extradoss or intradoss, it is recommended to turn up the reinforcement system, in correspondence with the shutters, by at least 40 cm. To improve the anchoring of the reinforcement system it is possible to appropriately prepare any connections made with elements in GRFP (Armaglass Connector) or stainless steel (Helix Steel AISI 304). The connections increase the efficiency of the applied reinforcement. Type, number and pitch of punctual connections must be defined during the design phase. 1.1 m/m²: The adjacent sheets of basalt fiber mesh must be overlapped along the edges by at least 10 cm. Packaging: Roll of 50 m2 UM: €/m2

Parapetto in alluminio per fissaggio sul lato esterno della pensilina. Completa di supporti e bulloni in acciaio inossidabile, tappi in plastica e copertura per piede opzionale. CODICE: PRP-130 Altezza della ringhiera: 1300 millimetri Altezza minima della pensilina: 0 millimetri Distanza massima tra i pali: 1000/1500 millimetri Inclinazione: QUELLO Dimensione del palo: 80x30 millimetri Diametro dei tubi del corrimano: Diametro 40mm

I mandrini portapinze MSCTNR nascono per attrezzare le teste secondarie dei torni a CNC, sono realizzati in un blocco di acciaio, cementato e temprato a 60 HRC. Sono totalmente rettificati per assicurare la massima durata, precisione e bilanciatura. I mandrini portapinze MSCTNR sono realizzati con attacchi ISO-A (DIN 55026) ed a FLANGIA (AF). L’apertura e la chiusura della pinza nel mandrino MSCTNR avviene mediante cilindro idraulico o pneumatico applicato posteriormente all’albero del tornio. La pinza montata nel mandrino MSCTNR è a semplice cono tipo BA. Possono essere altresì montate, mediante opportuni adattatori, le pinze espansibili tipo PE e PET. Il mandrino MSCTNR è dotato del “GRUPPO ESPULSORE PEZZO” qualora il tornio ne sia sprovvisto. Su richiesta il mandrino è fornibile senza “Gruppo Espulsore Pezzo”, per essere montato su torni già dotati in origine di tale gruppo. Il mandrino portapinze MSCTNR è stato realizzato in modo da sfruttare il

ATTUATORI PNEUMATICI - SERIE 82 MOD. 230 - ATTUATORI PNEUMATICI - SERIE 82

Otturatori di bilanciamento

A clever mix of Arabica and Robusta from the best crops in the world, the decaffeination through rigorous processes cutting edge, make this mixture is the right balance between the desire for coffee and physical well-being. A unique coffee, intense aroma and rich and strong taste.

Pioli filettati

Perni

Manicotti

Mild and well-balanced coffee from the perfect combination of select Arabica and Robusta to give you the quintessential Italian Espresso.

Piatelli