Termékek epoxy grout cég (38)

Grout CR Composite , castable, anti-washout, controlled shrinkage cement mortar, superfluid consistency, based on high-resistance cements, superpozzolanic fillers (MICROSIL 90), polymeric modifiers, shrinkage resistant agents, specific additives, calcium silicate mineral fibres, selected silica aggregates. - Based on of thickened silica fume - three-dimensionally reinforced fibre with mineral and synthetic fibres - Provides high adherence and adhesion - dimensionally stable (shrinkage-compensated) - Provides high stability-physical chemical and resistance to chlorides and sulphates - suitable for underwater castings: it is anti-washout - high strength in terms of hydrostatic positive and negative thrust. Repair and protective coatings of hydraulic structures, marine and underwater structures, and articles in critical situations: harsh chemical-physical, leaching water, marine atmosphere, etc. Filling of formwork for the containment of cast immersed in sea water. In case of underwater application, the installation operations must be carried out within 8-10 hours of cleaning and "fouling" (accumulation and deposits of organic and inorganic particles on product surfaces) removal. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour 2/3 of total mixture water in the cement mixer, gradually add the product and the remaining water, until a homogeneous mixture of the required consistency is obtained. For sizable filling thicknesses, greater than 60 mm, Ghiaietto 6.10 (inert washed is selected with a particle size of from 6-10 mm) can be added in a percentage ranging from 20% to 40 %, on the basis of practical requirements. In some particularly demanding cases in terms of the resistance to the "dry-wet" cycle (for example, for the action of the tides) or for chemical attacks particularly strong, it would be advisable to add, in addition to the gravel, even thickened silica fume(MICROSIL 90), and in a variable amount depending on the thickness and construction-related need, to further improve the waterproofing and the mechanical strength of the product. In these cases, please contact our Technical Service. In the case of casts in water, make sure of perfect product hardening before removal of the formwork. Approximately 20,50 kg/m² of Grout CR for every centimetre of thickness to be implemented (approximately 2050 kg per cubic metre). Packaging: 25 kg bag UM: €/kg

COMPOSITION ET ASPECT Blanche. CONDITIONNEMENTS Cartouche de 290 ml. STOCKAGE 12 mois à l’abri du froid et des fortes chaleurs en emballage d’origine non entamé. CARACTÉRISTIQUES TECHNIQUES • Matières premières : MS Polymère • Système de durcissement : par l’humidité • V itesse de durcissement : 2,5 à 3 mm par 24 h. (à T=23°C et 50 % HR) • Formation de peau : 10 à 15 minutes (à T = 23°C et 50 % HR) PRÉCAUTIONS D’EMPLOI Ne pas travailler en dessous de +5°C. Conserver hors de portée des enfants. Contient : N-(3-(trimethoxysilyl)propyl)ethylenediamine - Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacaat - Methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacaat. Peut déclencher une réaction allergique. PRÉPARATION DES SUPPORTS Les supports doivent être propres, secs, dépoussiérés et dégraissés. APPLICATION Appliquer la colle en extrudant un cordon ou des points sur le support ou l’élément à coller. Assembler les matériaux le plus vite possible : maxi 10 minutes. • Poids spécifique...

2component epoxy paint for the protection of concrete floors, metal structures, etc. Does not contain solvents (100% solids). Features Excellent adhesion. Great penetration power. Good adhesion in wet substrate with high percentage of humidity. Good capacity for reaction at low temperatures and high percentage of humidity. Indoor and outdoor use.

FIX is a gypsum-based adhesive that is used for direct fixing of all types of plasterboards on walls made of concrete, aerated concrete, bricks, etc., in premises with normal humidity. Application: • Drywall linings without supporting structure • Shaping of window and door openings • Filling of cavities greater than 3 mm • Application in premises with normal humidity Advantages: • High strength • Fast gathering of strength • Excellent traction with the base • Easy and effective work TECHNICAL INFORMATION: In compliance with EN 14496:2017 : Type 3B • Paper bag: 25 kg • Mixing Ratio: ~ 13 l water : 25 kg • Coverage: ~ 5 m²/ 25 kg • Consumption: ~ 5 kg/m² • Bond strength: 0.23 MPa • Bags per pallet: 40 pcs • Pallet weight: 1000kg Sizes (kg):25

Nous fournissons tout type de ciment colle fabriqué selon la norme EN 12004 : du Cilement colle basique (C1) à ciment colle haute performance (C2TES2)

KAROFiX® SUPER FLEX Cement-Based High Performance Elastic Adhesive Mortar APPLICATION FIELD Provides superior performance in fixing of coating materials such as ceramic, granite, porcelain ceramic, marble, travertine etc. at all sizes on horizontal and vertical surfaces for interior and exterior areas. It may be applied on dry and wet areas (baths, swimming pools, water tanks, terrace, etc.), cement-based plasters and concrete surfaces, floorings with floor heating system, floors exposed to high level of traffic, areas with thermal shock risk, cold storage rooms, floors exposed to vibration, and applications of ceramics over ceramics.

Résine verte spécialement conçue pour nos applications de fixations chimiques de surface, inventé par la SNIT.

Accessoires Colle universelle de contact à pistoler à base de polychloroprène (Néoprène®) en canister spécial pour un pistolage immédiat sans la moindre installation de pistolage. Prête à l'emploi immédiatement et particulièrement écologique, utilisable avec un pistolet, ne nécessite pas d'air comprimé ou d'électricité, séchage et force d'adhérence initiale très rapides, rapide à mettre en oeuvre, pas d'entretien, toujours prêt à pistoler, très faible consommation, résistante à l'humidité, très haute résistance aux températures (jusqu'à +115°C), résistante aux acides et bases légers, sans toluène et chlorure de méthylène Accessoires 47100275 DISSOL SPRAY POUR COLLE CONTACT 500ML 47100612 CLEANING ADAPTOR NEOSPRAY - DISSOL SPRAY 47100615 FLEXIBLE NEOSPRAY 4M 47100620 PISTOLET NEOSPRAY 47100625 BUSE DE RECHANGE PISTOLET NEOSPRAY

Eine industrielle Bodenbeschichtung, die dank ihrer Epoxidharz-Basis enorm chemikalienbeständig ist. In vielen Farben und den Versionen Säureresistent, Anti-Rutsch, Kalttrocknend, Rapid verfügbar.

L'IDS EPOXYKLEAN 100 est spécialement formulé pour le nettoyage et le décapage des résines époxy, PU, etc. employées pour le collage et jointoiement de revêtements céramique ou autres supports. Ce produit permet l’élimination des vernis époxy, vernis 2K, revêtement anticorrosion, etc. employés notamment dans l’industrie automobile pour le nettoyage des installations d’application de peintures et résines (pistolet, pompes, buses, zones de préparation, sols, etc.). L’IDS EPOXYKLEAN 100 est une solution neutre qui permet le ramollissement des résines même durcies. Sa formulation est totalement exempte de produits CMR. L’IDS EPOXYKLEAN 100 ne corrode pas les métaux ferreux et non ferreux et n’attaque pas les joints dans leur masse. Produit fabriqué en France.

Steinteppiche für Innen und Aussen mit unterschiedliche Kies und Natursteine

Pardoseala epoxidica cu granule colorate Emex Quartz - See more at: http://www.e - Pardoseala Epoxidica Decorativa EMEX QUARTZ este un produs profesional, pe baza de rasini epoxidice fara solvent, disponibil intr-o gama infinita de modele obtinute prin inglobarea de granule de cuart sau marmura divers colorate in masa pardoselii. Acest tip de pardoseala se mai numeste si covor epoxidic. Produsul poate inlocui cu succes mozaicul sau gresia, avand in primul rand avantajul aspectului superior, dar fiind si o alternativa mult mai rezistenta atat la utilizare dar si in timp a acestora. Caracteristici principale: - Produs agrementat sanitar; - Aderenta excelenta la suport; - Etalare de exceptie; - Duritate excelenta; - Durabilitate mare; - Rezistenta mare la abraziune; - Rezistenta excelenta la uzura; - Rezistenta mare la agenti corozivi; - Rezistenta mare la hidrocarburi, medii acide sau alcaline.

Das Epoxidharz-System E30RB ist eine 2K Epoxi-Rollbeschichtung mit mittlerer Verarbeitungszeit für hochwertige Boden- und Wandbeschichtungen ähnlich RAL7032 kieselgrau.

Nummer Eins chemicals 2008 Yılından beri Kimya sektöründe edinmiş olduğu tecrübeler ışığında müşterilerine en iyi ürünü ve hizmeti sunma felsefesi ile yola çıkarak İSTANBUL tuzla’da A.O.S.B de Epoksi ve Poliüretan Yapı Sistemleri, Antikorrozif epoksi ve poliüretan çelik konstrüksiyon ürünleri, Ahşap ve Metal tekneler için epoksi ve poliüretan ürünler, Su bazlı polimer esaslı su yalıtım sistemleri İç ve Dış mekanlarda kullanılan kaplama sistemlerine yönelik ürünlerin üretimine devam etmektedir. Firmamız kaliteli üretim kaliteli ürün anlayışı ile Avrupa normlarına uygun laboratuar cihazları ve analiz ekipmanlarına sahip ARGE ve Kalite Kontrol Laboratuvarında konusunda uzman mühendis ve kimyager kadrosu ile günümüz dünyasındaki teknolojik gelişimleri yakından takip ederek ürünlerini sürekli geliştirmekte ve yenilikçi bir anlayış ile çalışmalarını sürdürmektedir.

Beständige Versiegelung in Profi-Qualität mit einfacher Verarbeitung in innovativer Knetbeutel-Verpackung. Floorcoat Bodenversiegelung überzeugt durch die einfache Verarbeitung, den günstigen Preis und einer innovativen Knetbeutelverpackung. Einsetzbar auf allen Bodenflächen im Innenbereich mit leichter Beanspruchung. Öl-säurebeständig und abriebfest.

Dış mekanlarda yatay ve dikey uygulamalarda. Çimento esaslı sıva, yapıştırıcılarda ve alçı esaslı harçların altında aderans artırıcı olarak kullanılır. Brüt beton duvar, tavan, kolon vb. yüzeylerde, alçı plaka, çimento ve ahşap esaslı levhalarda, EPS ve XPS ısı yalıtım levhalarında. Tekstürlü olmayan parlak ve emici yüzeyler için özel olarak üretilmiştir

Ein geschmeidiger Epoxidharz-Mörtel für die Reparatur von Betonböden oder Asphalt, Innen oder Außen, nach 12 Studen mit Gabelstapler befahrbar. Gibt es in den Versionen schnellhärtend, 0-10C° härtend und verschiedenen Farben. Kann leicht und einfach durch Ihre eigenen Mitarbeiter verarbeitet werden.

REFERENCE : ARTP3200TCR25 ALPHA 3200 coloré PLATRE 3200 T.CUITE ROUGE 25kg -> Descritpion PLATRE DE MOULAGE COLORE POUR L'INDUSTRIE STATUAIRE -> Domaine d'application Produit teinté, spécialement conçu pour l'industrie statuaire : - Moulages durs, - Maquettes, - Statuettes, et ornement. -> Caractéristique Unité de vente : bidon de 25kg Minimum de vente : un bidon

Nos solutions de diagnostic EasyGel Protect®, vous garantissent un empoussièrement < à 5f/L (limite du code de la santé publique). Cette performance est atteinte dans la mesure où l’on s’inscrit dans le respect de la notice produit, d’un mode opératoire réglementaire et la formation des personnels. Respect du code du travail qui stipule que le chef d’entreprise doit prendre toutes les mesures techniques nécessaires pour réduire tout empoussièrement. Méthode de prélèvement n’altérant pas les analyses des laboratoires. La solution convient pour tous types de poussières nocives ou non. Référence:EGP310DIAG Destination:Prélèvement dans le cadre de repérage amiante Conditionnement:Cartouche de 310 ml Gel coloré:Non quantité minimum:12 unités

One Side Adhesive for LEATHER'S PRODUCERS The NEOPRENE ONE WAY is a plychloroprene adhesive adapt for LEATHER'S PRODUCERS and GIUNETRIA in particular in the case where you want apply the glue only in a side. Used for the construction of insoles in shoes too. It has high viscosity. High bond strength. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 30 - 60 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon one of the two parts has to be sticked, let it dries for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1 .

durability and design: FLAKE flooring elements are used to enhance the appearance and texture qualities of highperformance flooring systems while maintaining superior chemical and abrasion resistance. hygienic and seamless protection: High-performance flooring systems create seamless surfaces that are extremely durable and easy to maintain. The non-porous surface makes spills easy to clean and provides superior protection against the growth of mold and bacteria compared to tile and grout options. design options: For everyday spaces, choose from our extensive collection of professionally designed color patterns..

Référence GCNOIRPIS-25KG

Voor kelderafdichting aan de binnenzijde, zijn er diverse succesvolle methoden, uitgaande van een situatie dat u niet aan de buitenzijde kunt afdichten. Als het om een gemetselde kelder gaat dan is vlaksgewijs afdichten een zekere en afdoende methode. Bij een betonnen kelder echter kan er, bijvoorbeeld bij scheurvorming of een kimlekkage, geïnjecteerd worden. Alle mogelijkheden van kelder binnenafdichting vind u hieronder uitgewerkt. Vochtbestrijding begint bij Köster Afdichtingssystemen.

Kuma döşenen kauçuk karoların uygulamasının yapılabilmesi için asfalt veya beton bir zemine ihtiyaç yoktur. Uygulaması sırasında yapıştırıcı kullanılmaz. Kauçuk karolar, tesfiyesi yapılan toprak zemin üzerine serilmiş sıfır numara kum üzerine yerleştirilir. Bu ürünün en büyük avantajı kauçuk karoların demonte olması yani isteğe bağlı olarak döşendikleri yerden sökülüp başka bir yere taşınıp yerleştirilebilir olmasıdır. Aynı zamanda, kauçuk karo uygulaması mevsimsel hareketlerden etkilenmez; hem ıslak hem kuru havada döşemesi yapılabilir. Taşıma, yer değiştirme veya montaj işlemlerinde ürün kaybı olmaz ve onarım çok kolaydır. Neden kuma döşenen kauçuk karo zemin kaplaması tercih edilmeli? *Dayanıklı ve uzun ömürlüdür *Demontedir *Kolay montaj imkanı sağlar *Tekrar tekrar kullanılabilirdir *Her mevsim döşenebilir *Her türlü hava koşuluna karşı dirençlidir *Hızlı su tahliyesi sağlar *Darbe emicidir *UV’ye dayanıklıdır *%100 Çevre dostudur

Il peut être utilisé en toute sécurité sur les points de graissage des machines agricoles, des machines industrielles, des surfaces de glissement, des paliers lisses et à rouleaux légers et moyens à grande vitesse et de toutes sortes d'équipements automobiles.

CRYO CLEAN s’engage pour la planète avec le nettoyage cryogénique écologique, sans produits chimiques et sans eau, réduisant ainsi les déchets et la pollution. Nos services s’étendent des machines industrielles aux moteurs de véhicules, dégraissage de tous types d'équipements, offrant une solution propre, sûre et rapide pour une variété d’applications tout en respectant vos salariés. Le nettoyage cryogénique utilise de la glace carbonique qui ne laisse aucun résidu secondaire. Cela permet un nettoyage rapide sans temps de séchage, rendant les équipements disponibles immédiatement après le nettoyage. Le nettoyage cryogénique est non abrasif et préserve l'intégrité des machines. Il peut être utilisé sur des composants sensibles sans risque de dommage, prolongeant ainsi la durée de vie de l'équipement. Nous intervenons dans différents domaines comme : agro alimentaire, plasturgie, pharmaceutique, aéronautique, engins du BTP.

Die GEO-protect-Farbe wird dauerhaft bei großflächigen Sanierungen bei Erdstörzonen angewendet. Auch zur Prävention bei Neubauten oder Renovierungen.

Rotafix Zeroset Anchor Grout is a 2-part high strength epoxy system that is used for the fixing of metallic objects into concrete such as anchors and studs. Rotafix Zeroset Anchor Grout has been specifically designed for setting at low temperatures in smooth-walled, diamond drilled holes. This chemical anchor will displace water from a hole then cure under any residual water. This high-performance chemical anchor grout has been approved by the Department of Transport for parapets and street lighting. Additional Information: Compressive Strength: 70N/mm2 Tensile Strength: 16N/mm2 Flex Strength: 32N/mm2 Workable for 20 minutes at 20°C Available Sizes: 500cc (Product code: 3542)

Grout 2 HP Grout 2 HP is a pourable, fiber-reinforced mortar, used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. The formulation contains very fine high-strength cements, micro-silicas with pozzolanic activity, aggregates in a rational granulometric curve (0.1 ÷ 1.8 mm), and special antisegregative additives. The product is mixed with 11% - 12% of water, requiring vigorous and prolonged mechanical mixing. The special formulation of Grout 2 HP provides the castings with mechanical strength, fracture energy, exceptional durability, and very high chemical-physical resistance. Grout 2 HP has a workability time of about 60-90 minutes, after which the setting process is triggered, followed by progressive hardening. The plastic and hygrometric shrinkage is extremely low thanks to the presence of Readymesh PM-060 multifilament synthetic fibers, which provide volumetric stability. The performances that make Grout 2 HP unique are: • very high compressive mechanical strengths (> 90 MPa at 28 days), • very high mechanical resistance to bending-traction (> 12 MPa after 28 days), • excellent durability and resistance to chemical attacks. Grout 2 HP is used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. It is particularly suitable for operations where high mechanical performance is required after short curing (compressive strength at 3 days > 60 MPa) and in operations carried out in severe exposure environments (XC - XS - XF), characterized by aggression from sulphates, chlorides, and nitrates. The material can also be used for repairs in anchoring areas subject to high stresses. The application surfaces must be clean, free of dirt, crumbly and incoherent parts, dust, etc., and suitably saturated with water until reaching the condition of "saturated with dry surface". Adequate roughening of the surfaces by scarifying, sandblasting, etc. is always necessary to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). It is strongly recommended, for optimal performance of site operations, to use a vertical axis mixer with planetary movement or a double horizontal helicoid. The powder is mixed with drinking water to the extent of 11% - 12%, referring to the total weight of the mortar (about 2.75 liters per 25 kg bag) until a homogeneous mixture is obtained. Mixing time: about 4 minutes with a high efficiency mixer. The anchoring can be filled with a single screw pump, for mortars. Pumping must be carried out at a controlled speed to ensure a low working pressure. In case of restorations, the surface must be protected, after application, by polyethylene sheets or anti-evaporation treatments. Packaging: 25 kg bag Unit of Measure: €/kg

Grout 6 HP SFR Grout 6 HP SFR is a fibre-reinforced high-performance castable mortar, equipped with mechanical compressive and flexotraction resistance far superior to normal structural mortars. It is used for repairs, replenishments, strengthening concrete reinforcement and special works in FRC. The mix of special metal fibres (Readymesh MM-150) and synthetic fibres (Readymesh PM-060) is able to drastically reduce or even eliminate plastic-hygrometric shrinkage and the development of exceptional characteristics of ductility, fracture energy, resistance to shock and dynamic stress. With very low water-binder ratios, Grout 6 HP SFR makes it possible to achieve compacting and hyperfluid rheologies that favour the movement of the mortar and the perfect filling of reinforced sprays, even with narrow spaces between the bars. The microsilica with pozzolanic activity increases the cohesion of the mixture with typical anti-segregating and anti-run-off effect. The particular fineness of the hydraulic binders contained in the formula promotes adherence to the substrate and has an effect of enlarging the fibrous components. The fibre mix offers strong ductility, toughness and flexotraction resistance to the castings performed with Grout 6 HP SFR. With regard to the ANTICORROSIVE and PROTECTIVE FUNCTION ON THE REINFORCEMENT BARS, the main features of Grout 6 HP SFR are: • the mix of high-strength superfine binders, combined with very fine silicas with pozzolanic activities, to render the mortars intrinsically impermeable to water at the end of the hardening process; • The strongly alkaline pH (> 12) protects the reinforcement bars from triggering corrosion; • The negligible breathability of the carbon dioxide ensures hardened mortars with extremely prevalent anti-carbonation characteristics. Overall, these anticorrosive specificities render the classic treatment of reinforcement bar passivation, preparatory to the pouring of castable mortar UNNECESSARY, provided that not too much time passes between the white metal cleaning operations and the castings of pourable mortar, at the risk of new oxidative processes being triggered. Thus, only in the event that long exposure times are foreseen between the bar-cleaning operations and the pouring of castable mortar is it advisable to treat with passivating slurry (Repar Monosteel or Repar Steel), applied by brush and only on the reinforcing bars. On-site castings or pumping carried out for any kind of structural replenishment of reinforced concrete, seismic reinforcement and adjustment, increases in cross-sectional resistance of concrete structures and masonry, anchorages of large-scale machinery (especially in the presence of significant dynamic stresses), anchoring of port bollards, deep-drawing and reinforcement works, restoration of highly-stressed industrial flooring both from a static and dynamic perspective, restoration of degraded foundations on bridges and viaducts especially whereby necessitating rapid reopening to vehicle traffic, construction of structures designed with HPC (High Performance Concrete) needs. Application surfaces must be clean, free of dust, contamination, crumbling, inconsistencies, etc., and adequately saturated-surface-dry with water. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Mix the entire content of a bag of Grout 6 HP SFR with effective vertical-axis mixers for at least 6 minutes, initially introducing a slightly reduced amount of water (9% = 2.25 litres/25 kilograms bag) compared to the required total water permitted (10%–12% = 2.5litres — 3.0 litres/25 kilogram bag) whilst mixing for at least 4 minutes. After this mixing time, evaluate the consistency of the mixture and, if necessary, gradually add in the last of the water until achieving the desired workability, without exceeding the limit of 12% (3.0 litres/25-kilogram bag), mixing at high RPM for at least another two minutes. For thick casting sections, it is advisable to add Ghiaietto 6.10 (consult the relevant technical data sheet or ask for more information on the appropriate dosage of Ghiaietto 6.10 from our technical service). Given the self-levelling properties of the product and its self-compacting capacity, paying due attention to the vibration phase is recommended. Excessive zeal in the vibration operation can worsen the aesthetic rendering of the end result. Do not use in the absence of suitable lateral containment. Ensure exposed surfaces are protected and wet-cured. Adopt casting procedures to ensure the absence of voids and discontinuities. Only pour the mortar from one part of the casting perimeter to avoid air pockets. Packaging: 25 kg bag UM: €/kg