Termékek fehér hdpe (9)

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

HDPE

HDPE 3840 UA is a high density polyethylene.

Incassables et rigides, elles conviennent au calage, au capitonnage et à la séparation des objets les plus lourds et encombrants (équipements bureautiques, machines, pièces métalliques, œuvres d’art en pierre ou en bronze…) Antichocs, elles reprennent leur forme initiale même après plusieurs chocs et ne s’effritent pas, même au contact d’angles saillants.

Wir liefern Halbzeuge aus Fluor- und anderen Hochleistungs-Kunstoffen. Hochleistungskunststoffe PTFE PFA FEP PCTFE PEEK PEI Wir liefern Halbzeuge aus Fluor- und anderen Hochleistungs-Kunstoffen. Die Liste der Standardabmessungen finden Sie unter Stäbe, Rohre, Platten und Kugeln. Wir würden uns auch freuen, wenn Sie uns Ihre Anfrage für zeichnungsgebundene Teile zukommen lassen, die schnell und vertraulich beantwortet wird.

Diversidade de Plásticos Técnicos de alta qualidade.

Xtratherm Thin-R range is a high performance foil faced Polyisocyanurate (PIR) insulation with a certified thermal conductivity as Low as 0.022 W/mK. Thin-R Pitched Roof XT/PR on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimal intrusion into valuable living space. The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using XT/PR will reduce heat loss while also delivering excellent thermal bridging details. Warm Roof construction is a particularly effective way of insulating complex roofs. Insulating above - or above and between - the roof timbers ensures that the structure is kept at or near the internal environmental conditions, reducing thermal stress and condensation risk. Thickness : 15mm Lenght: 2400mm Width: 1200mm Overal Thickness: 15mm,20mm,25mm,30mm,35mm,40mm,45mm,50mm,60mm,65mm,70mm,75mm,80mm 90mm,100mm,110mm,120mm,130mm,140mm,150mm,160mm,165mm Maximum board weight: 0.

We supply you with the material cellular polyethylene as blocks, sheets or rolls, further processed into strips, punched parts, molded parts or milled parts, with or without self-adhesive coating. Cellular polyethylene is one of the most versatile and modern cellular materials when it comes to application and processing quantity. That's why we produce and sell an enormous range of cross-linked PE foams in variable densities, many colors and compression hardnesses. In addition, KOPP offers you electrically conductive, static-dissipative and flame-retardant PE qualities. This program is rounded off by high-quality EVA and a unique EPDM-PE blend. The material cellular polyethylene All of our cellular polyethylene qualities combine the positive properties of a plastic: high aging resistance, high chemical resistance, low emission values, exceptionally uniform density, they are odor-free and can be thermoformed. Origin:Germany Colors:red Explanations:K/PE70

HDPE HM-CRP 100 Black is a high density polyethylene.