Termékek fehér hdpe (20)

Bitumer Flexigum PU ist eine zweikomponentige Bitumen-Polyurethan-Verbindung, die eine dauerhaft flexible und chemisch beständige Befestigungs- und Spannungsübertragungsmasse bildet. Bitumer Flexigum PU findet seinen Einsatz in: •zur dauerelastischen Befestigung der Schiene als Unterboden, •Schienenbefestigungsmasse und als Unterbodenbelag, •zur Herstellung dauerhafter und flexibler Dehnungsfugen zwischen Betonplatten und Elementen aus Stahl, •Ausfüllen der Lücken zwischen Fahrbahn und Schiene, •zum Füllen von Beton-Beton-Fugen •Verfüllen von Fugen, Lücken, Rissen und Dehnungsfugen in stark bearbeiteten Asphalt- und Betondecken (z. B. Bordsteine ​​auf Brücken), •Verfüllen von „arbeitenden“ Fugen auf Stahl- und Betonbrücken und anderen Gehwegen, die durch starke Bewegungen gekennzeichnet sind.

Sanafarbe P Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanafarbe P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and internal and external restoration paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. Sanafarbe P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours. Apply from 0.20 to 0.40 liters of Sanafarbe P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Este modelo fue desarrollado específicamente para aplicaciones industriales. Los tapones de goma industriales se pueden utilizar durante el mantenimiento o almacenamiento de maquinaria. El caucho comprimido crea un sellado perfecto para fluidos como hidráulicos y químicos, evitando cualquier fuga. El material no reacciona con productos químicos utilizados frecuentemente en aplicaciones industriales, lo que, combinado con el sellado perfecto, disminuye significativamente la posibilidad de contaminación. Además, está fabricado con un caucho extremadamente duradero que no se agrieta en condiciones extremas. Pueden usarse desde -25°C hasta 90°C, dejando una ventana lo suficientemente amplia para realizar trabajos de mantenimiento en maquinaria.

Fire Resistant Plasterboard Type DF consists of gypsum core reinforced with special additives and clay, enclosed between special paper for enhanced fire resistance. Application: • Ceiling • Wall • Areas with higher requirements for fire protection such as evacuation corridors, stairways, industrial premises, etc. Ideal for indoor use in areas with normal humidity up to 60% Advantages: • High density of gypsum core for better sound insulation and stability Type D • Increased resistance to high temperatures Type F • Easy to cut and mount TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000-3000 10.00 60 pcs 15 1200 2000 12.50 50 pcs Thickness (mm):12.5 / 15 Width (mm):1200 Length (mm):2000-3000

Geoliner Series offers high variety of smooth and textured polyethylene geomembranes made of top quality of high density or low density polyethylene resins in compliance with the industry and regulatory requirement. Geoliner ensures the uniform thickness for the range between 200micron up to 3mm. The sheet is available in variable widths up to 7,5m. Relying on combination of Geoliner with most trustworthy insurance layer of BentoShield geosynthetic clay liner, Geomas delivers the highest quality double lining system package to meet the complex needs of our customers for soil and groundwater protection projects as below: - Landfill and mining engineering - Hydraulic engineering projects such as reservoirs, channels, etc. - Environmental engineering projects such as sewage plants, secondary containment, etc Advantages over other liners •High Chemical resistance in highly acidic and alkaline environment. •High mechanical resistance in a wide range of temperature.

Der Zellkunststoff hat eine geschlossene und offene Zellstruktur und ist daher sehr weich. Die mechanischen Eigenschaften sind gut. Wir liefern die Zellkunststoffqualitäten in den Raumgewichten von 100 kg/cbm - 160 kg/cbm. Der Zellkunststoff hat eine geschlossene und offene Zellstruktur und ist daher sehr weich. Die mechanischen Eigenschaften sind gut. Darüber hinaus ist die Qualität gegen Mineralöl, Benzin, Laugen und Säuren beständig und erfüllt die Anforderungen nach FMVSS302. Die Zellkunststoffqualitäten liefern wir als Platten, Streifen, Stanzteile oder Bahnenware. Wir können die Zellkunststoffqualitäten auch einseitig selbstklebend ausrüsten. Bitte beachten Sie, dass unsere Selbstklebung eine reine Montagehilfe ist. Die Zellkunststoffqualitäten eignen sich aufgrund der physikalischen Eigenschaften sehr gut als Dichtungen und Isolierungen in der Bauindustrie, dem Maschinenbau etc.

PTFE Membranen bieten die richtige Kombination aus mechanischen, thernischen und physiologischen Eigenschaften. PTFE-Membranen mit guter Biegelastwechselfestigkeit, nahezu universeller chemischer Beständigkeit, sehr guter Sterilisierbarkeit und FDA-Zulassung. Bauart: Mit integriertem Dichtkegel in Abfüllanlagen

Erwerben Sie PTFE Platten im Format 2.000 x 1.000 mm in vielen verschiedenen Stärken bis 100 mm. ✓ Exzellente Chemikalienbeständigkeit ✓ Dauergebrauchstemperatur bis zu 260 °C ✓ Hervorragende Gleit-/ Reibungseigenschaften

PTFE (TEFLON) RODS Semi-Finished Products. Whole Sales from stocked items. Dimensions can be adjusted according to your demands. Made from the best quality raw materials. Wedge: Up to Ø20mm-425mm size, Height 100-150-300mm Hollow Wedge, Outer Delimeter:Up to Ø25mm-900mm – Inner Delimeter: Up to Ø15mm-850mm Height 100-150-300mm

AFR-OMEGA LD x CD x L x e:160 x 40(52) x 24 x 1,5, 160 x 40(52) x 24 x 2,160 x 40(52) x 24 x 3 ACIER kg/m²:10,8, 14,4, 21,6 ALUMINIUM kg/m²:3,6, 4,8, 7,2 Formats maxi Panneaux mm:LD1000/1250/1500 x 3000 ou LD2000/2500 x 1600 maxi Epaisseur apparente (interne) mm:16 Vide frontal % Vide maxi:15 env.46

TERPENE - HASH #1 - 100ml - Terpenes

Klebemörtel für nicht mineralische Untergründe in den weber.therm-Systemen

Flexible single-component mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity. Its flexibility allows it to cover microcracks that form in concrete subjected to deformation. Strong adhesion, impermeability, no shrinkage and excellent workability. Maximum thickness per layer:1mm Minimum total thickness:2mm Consumption:1.25 kg/m2 and mm thickness

Tablero de PEEK: Excelencia Ingenieril en Plástico. El tablero de PEEK es un plástico de ingeniería de alto rendimiento conocido por su excepcional resistencia mecánica, estabilidad térmica y resistencia química. Redefine la precisión y la durabilidad, convirtiéndose en la elección ideal para aplicaciones exigentes de ingeniería. Eleva tus proyectos con el tablero de PEEK, el pináculo de los plásticos de ingeniería.

PTFE Platten in folgenden Abmessungen 600 x 600, 1.000 x 1.000, 1.000 x 2.000, 1.200 x 1.200, 1.500 x 1.500 mm von 0,5 - 100 mm Stärke.

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Plugtite™ Hitzebeständig ist so konzipiert, dass es hohen Temperaturen von bis zu 230 °C (445 °F) standhält. Zu den allgemeinen Anwendungen gehören elektrostatische Leitungen, Druckguss usw. Aufgrund der extremeren Umgebung ist auch die Öl- und Chemikalienbeständigkeit der hitzebeständigen Stecker größer als die anderer Stecker. Sie bieten eine perfekte, leckagefreie Abdichtung bei hohen Temperaturen, ohne zu reißen oder sich zu verschlechtern.

PTFE Membranen bieten die richtige Kombination aus mechanischen, thernischen und physiologischen Eigenschaften. PTFE-Membranen mit guter Biegelastwechselfestigkeit, nahezu universeller chemischer Beständigkeit, sehr guter Sterilisierbarkeit und FDA-Zulassung. Bauart: Mit Metallkern für Lackierpumpe

Il s'agit d'un conglomérat d'agrégats de marbre concassés, d'agrégats légers et de ciment, ensachés à l'état sec afin que l'utilisateur, en le mélangeant avec l'eau indiquée, obtienne un béton de faible densité de qualité adéquate et constante. Résistance à la compression:>20 N/mm2 Densité de la poudre:1300 Kg/m2 Densité apparente:1600 Kg/m2 Consistance du béton frais - tassement:60-90 mm Taille maximale des granulats:10 mm

Mortier flexible monocomposant qui protège et imperméabilise tous types de surfaces de construction, béton ou mortier en présence d'eau ou d'humidité. Sa flexibilité lui permet de couvrir les microfissures qui se forment dans le béton soumis à la déformation. Forte adhérence, imperméabilité, aucun retrait et excellente maniabilité. Épaisseur maximale par couche:1mm Épaisseur totale minimale:2mm Consommation:1,25 kg/m2 et mm d'épaisseur