Termékek hhc bulk distillat (2)

Distal-M Release agent based on selected organic compounds, promoting removal and anti-corrosive agents, ready-to-use, specific for metal moulds. Distak-M should be used undiluted, sprayed directly on the surfaces to be treated. Distak-M performs a physico-chemical action: the product, properly applied, forms an extremely thin separating film between the formwork and the fresh concrete, allowing easy detachment and the resulting surfaces are free from stains and soiling. Distak-M is suitable for "stripping" metal moulds, both in traditional buildings and in prefabrication with normal and/or steam curing. The chemical activity, connected with the reaction, at superficial level with the alkalis of the fresh concrete, which allows the elimination of the barrier effect, leaves surfaces without removal problems for subsequent coatings and painting. It facilitates formwork removal, without greasing or staining the workpiece. It prevents cracking and bubbles on the final surfaces of the product. After formwork removal, it can be painted or treated with another type of finish. It protects the formwork from rust. It can be used as a protective agent on truck mixers or equipment, to reduce internal and external concrete incrustations. Release treatments for concrete castings in metal moulds with normal and accelerated curing. Distak-M is a ready-to-use product that must be applied as a spray. With one litre of Distak-M, correctly applied, the indicative yield is about 30-50 m², depending on the quality of the formwork. Any excess product must be removed; any overdosage may compromise the stripping or the success of the superficial appearance of the casting. With 1 litre of Distak-M, correctly applied, it is possible to consider an indicative yield of approximately 30-50 m², according to the quality of the formwork. Packaging: 25-liter can UM: €/l

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)