Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.
The Industrial Heavy Duty Trigger has a chemical resistance to solvents, strong acids and other aggressive chemicals. The trigger sprayer is equipped with FKM (Viton) seals and has a heavy-duty nozzle, that is adjustable from mist to straight jet.
Features
605.500.420 = 19 cm suction tube
605.500.425 = 25 cm suction tube
Supplied without bottle
Fits our 600 and 1,000 ml bottle
Flow rare per spray:1.5 ml
Neck size:28/400
Length of the suction tube:19 cm
Weight:33 g
Pulvérisateurs à pression & Pulvérisateurs à pression Turn'n'Spray
- Fonction de pulvérisation « Tête en bas »
- Jet réglable, diamètre de buse de 0,8 mm
- Température du liquide : de 0 à 30 °C
- Contenu : 1,5 l
- Pièces en contact avec le milieu PE, PP, FKM, V4A
Pulvérisateurs à pression Food
- Pièces en contact avec le milieu PE, PP, FKM, V2A
- Contenu : 1,2 l
" Made in Germany" ABAC HVLP SET - HVLP turbine ABAC SG90 electronic, HVLP spray gun ABAC PN2A (nozzle 1,0-1,5-2,0mm); air hose 6m, shoulder strap, viscosity measuring cup, 1pc. reserve filter for turbine.
Manufacturer:Geheit GmbH (ex CHIRON)
Voltage230 volts or 115V
Flow Rate2300 Liter Per Minute
Air Flow Capacity2.3 Cubic Meters per Minute
Maximum Pressure0.22 Bars
Sound Level80 dB
Hose Length6 m
Cord Length5 m
Spray gun- anodized aluminum 0,7L
L’apparecchio Turboshort 1000 utilizza il metodo di verniciatura ecologico High Volume Low Pressure (Grande Volume d’Aria a Bassa Pressione).
La turbina di cui è dotato genera infatti un grande volume d’aria calda, ottenuto meccanicamente per attrito, facilitando l’asciugatura e il relativo attacco delle vernici ai supporti.
I prodotti si posano delicatamente sulle superfici da ricoprire diminuendo la possibilità di colature e accelerandone l’essiccazione.
L’aria generate dalla turbina oltre ad essere calda è anche secca: l’umidità relativa viene ridotta quasi del 40% e le condensazioni di acqua e olio sono del tutto eliminate.
Si creano così condizioni ideali per una perfetta applicazione delle moderne vernici.
Il metodo a Bassa Pressione utilizzato dalle nostre turbine HVLP limita poi l’inconveniente della formazione di nebbia come invece accade nelle apparecchiature ad aria compressa.
Ne conseguono economie di vernice dal 20 al 40% e la riduzione dell’inquinamento
Cradle 3C Sheet steel cradle, open Suitable for: 300ml 10:1 coaxial aluminum cartridges 310ml 10:1 coaxial plastic cartridges 310ml 13:1 coaxial plastic cartridges 330ml 10:1 coaxial plastic cartridges 150ml 10:1 coaxial plastic cartridges
Color
Black, turquoise Other colors on request
Drive
Extrusion rate: E= 2.1mm/pump Extrusion force ~1900N (at a manual force of 10kg) Application example: composite mortar, construction ... Other drives on request
Benefits
Parallel lever (patented) Upgraded, professional cartridge cradle New cradle with cartridge securing New cradle with large opening at front (easier cartridge insertion) Symmetry drive (patented). Two high-strength steel drive plates, moving in symmetry, ensure an optimal extrusion rate.Two ball bearings ensure optimal transfer of power to the drive plates. Wear-free, hardened drive rods Professional steel cartridge cradle Custom colors on request
Packaging
Individually packed in outer box 435mm x 180mm x 75mm
Pulvérisateur gradué Pro 600 ml Pour tous produits acides ou alcalins. Jet droit ou brouillard, ergonomique avec poignée antidérapante, prise en mains facile. Dosage précis des produits grâce à sa graduation intégrée. Tête de pulvérisateur canyaon usage intensif.
Existe en 4 couleurs Vert (Sols et surfaces), Bleu (Dégraissant), Rouge (Acide), translucide (Alimentaire).
Référence:MAT-PULGRAPRO/600
Poids:600 ML
Sprühgerät mit 6 Liter Fassungsvermögen aus Hartpolyethylen und Polypropylen zum
Auftragen von Beizchemikalien.
Sprühgerät IK-9
Sprühgerät mit 6 Liter Fassungsvermögen aus Hartpolyethylen und Polypropylen zum
Auftragen von Beizchemikalien.
Komplett einsatzbereit mit Sprühlanze, Säureschlauch und Trageriemen. Das Sprühgerät
ist nach dem Gebrauch gründlich mit klarem Wasser zu spülen.
Peignez les murs, les meubles ou d'autres objets plus grands avec ce pulvérisateur de peinture HBM avec réservoir de 600 millilitres, qui se situe sur le dessus de l'outil. Vous pouvez facilement le détacher pour le remplir de peinture ou de vernis, ou pour le nettoyer. La buse est quant à elle universelle et l'ouverture est de 1,5 mm. Enfin, la poignée de ce pulvérisateur de peinture de HBM possède une forme ergonomique, vous permettant de travailler plus longtemps sans vous fatiguer.
⊕Le gobelet est en plastique et possède une capacité de 600 millilitres.
⊕Ce pistolet à peinture est idéal pour peindre ou vernir de grandes surfaces, comme un abri de jardin ou une partie d'un véhicule.
⊕Le pulvérisateur de peinture est doté d'une buse de pulvérisation ronde, large et plate.
⊕Le flux d'air comprimé ajouté en permanence permet une application uniforme de la peinture.
Référence:3785
Raccordement du tuyau:1/4″ (6,3)
Buse:universelle (ronde, large et plate)
Buse:ouverture de la buse 1,5 mm
Contenu:600 ml
Gamme de pistolets High Output pour tous vos produits industriels, de jardinage...
Bague : 38/400, 42/410
Pistolet de type spray
Tube plongeur col 28/410 adaptable avec toutes les têtes
Dose:3cc
Bague/col/ouverture:42/410 | COL 38400
Blow guns, bleeder valves, spray guns, professional cleaning guns and special compressed air and liquid guns also belong to the RIEGLER product spectrum, as well as hand-held tyre gauges, hose clamps, sealing material and various supply units. You are always on the safe side with RIEGLER industrial adhesives, sprays and sticks.
The Red Ball is a cleaning gun with Ball Technology. Meaning it has a ball where there usually is a plastic or metal tube. This allows you to use the gun with a working pressure as low as 4 bar instead of the 6-7 bar for classic cleaning guns. Furthermore, only the ball spins, and not the internal tube of the Red Ball. This keeps the internal hose free of wear and doubles its lifespan. The high-tech motor guarantees troublefree operation.
Features
- Ultra reliable, high-tech motor bearings assembly
- Adjustable air pressure
- Multidirectional compressed air inlet 360°
- Operates at 4 bar instead of the minimum required 6.5 bar by other cleaning guns
- An additional seal prevents dirt from being sucked into the motor
- Less noisy than traditional cleaning guns
- With additional thread in the lid (patented) to which our 600 and 1,000 ml bottles, can be attached
- Easily removable brush
Weight:814 g
Content:1 L
Operating pressure:4 to 7 bar
Air consumption:4 bar: 311 L/min - 5 bar: 368 L/min - 6 bar: 453 L/min
Packaging:8 pcs/carton
Pulvérisateur manuel équipé de joints FKM ou EPDM.
Super résistance.
Pompe en polyamide renforcé.
Convient pour la plupart des solvants.
Pompe à main.
Ultra résistant aux produits agressifs (idéal pour nettoyant de freins).
200.100.020 | FKM/polyamide | rouge - noir
200.100.040 | EPDM | blanc - noir
Capacité:1 L
Pression:3 bar
Emballage:60 pcs/carton
The ideal low pressure gun for industrial and food related cleaning.
Flow adjustable from a fine mist to a concentrated jet.
EPDM casing protects against shocks and hot or cold temperatures.
Extremely sturdy stainless steel construction.
Reduces water consumption.
Delivered without connector and coupling.
Supplied with quick coupling 1/2” V
Optional: quick coupling hose Ø 12 mm (ref. 801.600.201)
Maximum pressure:25 bar
Water flow:25 l/min at 5 bar
Maximum temperature:80°C
"Made in Germany" HVLP Spray Gun ABAC PN 2A for ABAC SG90, SG2000 and SG2500 HVLP Paint Spraying Units, with Continuous Air Supply, 3 Nozzles 1, 1.5 and 2 mm Dia, 0.7 l Anodized Aluminum Paint Container, Nozzle Spanner
Manufacturer: Geheit GmbH (ex CHIRON)
Box Size: 37x17x12cm
Weight:1,2 kg
"Made in Germany" ABAC HVLP Paint Spraying System SG 2000: Motor Blower ABAC SG 2000, Spray Gun ABAC PN 1A, Air Hose 6 m., Dipper for Viscosity Checks, 2 Spare Intake Filters.
Scope of Supply:
Adjustable low-pressure motor blower SG 2000 with continuous pressure regulation and 5 m connecting cable.
Spray gun PN 1A with intermittent air supply, with 3 nozzles 1 - 1,5 - 2 mm and 0,7 I aluminium paint container.
Nozzle spanner.
Special air hose 6 m.
Dipper for viscosity checks.
2 spare intake filter.
Manufacturer: Geheit GmbH (ex CHIRON)
Motor power: 1200 Watt
Voltage 230 volts or 115V
Flow Rate 2800 Litres Per Minute
Air Flow Capacity 2.8 Cubic Meters per Minute
Maximum Pressure 0.31 Bars
Sound Level 81 dB
Hose Length 6 Metres
Cord Length 5 Metres
Spray gun- anodized aluminum 0,7L
HVLP Spray Gun ABAC PN 1A for ABAC SG2000 and SG2500 HVLP Paint Spraying Units, with Intermittent Air Supply, 3 Nozzles 1,0- 1,5 -2,0mm Dia, 0.7 l Aluminium Paint Container, Nozzle Spanner
Professional and reliable equipment of high quality. Made in Germany, components only from European manufacturers. 2-year warranty.
Minimal overspray, "low-misty" spray, minimal material loss, paint transfer coefficient up to 90% possible.
Reduced set up and cleaning times, reduced maintenance costs.
Plenty of additional nozzles from 0.2 (NANO) to 3.0 mm in diameter
Technical Data:
Maximum permissible operating pressure: 0.45 bar;
Size: 180 x 110 x 350 mm;
Weight: 0.76 kg.
Individually packed in PE bags 12 units per box 470mm x 310mm x 250mm
Color
Black, turquoise Other colors on request
Drive
Extrusion rate: G= 2.9mm/pump Extrusion force ~1400N (at a manual force of 10kg) Application example: chemical anchors Other drives available on request
Benefits
Symmetry drive (patented). Two drive plates and double brake plates made of high-strength steel, moving in symmetry, ensure an optimal extrusion rate.The toggle transmission ensures optimal transfer of power to the drive plates. Wear-free, hardened drive rods and pusher plates Professional steel cartridge cradle Three mechanical step-up ratios available Custom colors on request
Packaging
Individually packed in PE bags 12 units per box 470mm x 310mm x 250mm
Cradle 1010 Sheet steel cradle, open Suitable for 200 to 220ml 1:1 side-by-side cartridges
Color
Black, turquoise Other colors on request
Drive
Extrusion rate: V= 4mm/pump Extrusion force ~1000N (at a manual force of 10kg) Application example: foam cartridges, frame foam ... Other drives on request
Benefits
Parallel lever (patented) Symmetry drive (patented). Two high-strength steel drive plates, moving in symmetry, ensure an optimal extrusion rate.Two ball bearings ensure optimal transfer of power to the drive plates.
Packaging
Individually packed in outer box 370mm x 180mm x 75mm
Cartridge cradle 2020 Suitable for 400ml 1:1 and 2:1 side-by-side cartridges, for instance from Mixpac, Ritter, Sulzer, and TAH.
Color
Black, turquoise Other colors on request
Drive
Extrusion rate: G= 2.9mm/pump Extrusion force ~1400N (at a manual force of 10kg) Application example: 2K adhesive ... Other drives on request
Benefits
Inline movement of the piston rod (patented) Symmetry drive (patented). Two high-strength steel drive plates, moving in symmetry, ensure an optimal extrusion rate.The toggle transmission ensures optimal transfer of power to the drive plates. Wear-free, hardened drive rods Professional steel cartridge cradle Three mechanical step-up ratios available Custom colors on request
Packaging
Individually packed in PE bags 8 units per box 470mm x 310mm x 250mm
Aluminum tube 600ml Suitable for 310ml to 600ml sausage packs or cartridges On request also available with transparent plastic tube with scale.
Color
Black, turquoise Other colors on request
Drive
Extrusion rate: L= 8mm/pump Extrusion force ~500N (at a manual force of 10kg) Application example: kitchen and bathroom tile joints, expansion joints ... Other drives on request
Benefits
Symmetry drive (patented). Two drive plates and double brake plates made of high-strength steel, moving in symmetry, ensure an optimal extrusion rate. The toggle transmission ensures optimal transfer of power to the drive plates. Wear-free, hardened drive rods and pusher plates. Professional cartridge cradle Three mechanical step-up ratios available Custom colors on request
Packaging
Individually packed in PE bags 12 units per box 560mm x 310mm x 250mm
Cradle 3030 Sheet steel cradle, open Suitable for 600ml 1:1 side-by-side cartridges
Color
Black, turquoise Other colors on request
Drive
Extrusion rate: E= 2.1mm/pump Extrusion force ~1900N (at a manual force of 10kg) Application example: 2K adhesive ... Other drives on request
Benefits
Parallel lever (patented) Symmetry drive (patented). Two high-strength steel drive plates, moving in symmetry, ensure an optimal extrusion rate.Two ball bearings ensure optimal transfer of power to the drive plates. Wear-free, hardened drive rods Inline movement of the piston rods (patented) Professional steel cartridge cradle Four mechanical step-up ratios available Custom colors on request
Packaging
Individually packed in outer box 435mm x 180mm x 105mm
Cartridge cradle 4C2 Suitable for 380ml to 410ml 5:1 coaxial cartridges Other mixing ratios on request (1:10, 1:1, 2:1 ...)
Color
Black, turquoise Other colors on request
Drive
Extrusion rate: G= 2.9mm/pump Extrusion force ~1400N (at a manual force of 10kg) Application example: assembly, composite mortar ... Other drives on request
Benefits
Symmetry drive (patented). Two drive plates and double brake plates made of high-strength steel, moving in symmetry, ensure an optimal extrusion rate.The toggle transmission ensures optimal transfer of power to the drive plates. Wear-free, hardened drive rods and pusher plates Professional steel cartridge cradle Three mechanical step-up ratios available Custom colors on request
Packaging
Individually packed in PE bags 12 units per box 470mm x 310mm x 250mm