Termékek ipari pufferpár (3)

Chain Magnetic Separator are used for the cleaning of liquids contaminated with magnetizable solid particles and foreign oils. F.E.S. separator systems can be used in full-flow or bypass cleaning applications. The separation performance varies depending on the level of contamination and the volume flow rate. Note: The separator systems can be supplied via a separate supply pump, existing system pumps (with sufficient reserve capacity within the existing system components), or a free inlet (with sufficient geodetic height difference). Advantages: No filter aids required High separation efficiency Large throughput capacity Large active separation surface due to favorable separation geometry and optimal arrangement of magnets Low wear and tear Operating Principle: The contaminated liquid is supplied to the separator through the flange (1) located at the bottom.

Type RK/RF for continuous operation, suitable for virtually all types of dust. Round filter type RK / RF The round filters from this series are suitable for continuous operation and for almost all types of dust. What is special about them is the rotary cleaning device, which causes the dust to be sucked out of the filter hoses and discharged. Using other methods the dust is also continuously dislodged from the filter element, but contaminates the other filter elements in the next moment. Only a small part of the dislodged dust falls down and is discharged. The lower part of the filter is implemented like a cyclone and acts as a pre-filter, where coarse dust is already separated and discharged. Compressed air impulse cleaning is also possible as an option here. The filtering direction of the filter hoses is from the outside inwards. The hoses are provided with support frames.

Industrieventilatoren für die Förderung von Gasen und staubfreier Luft, Späne-/Materialförderventilatoren, Hochleistungsvarianten für Gas- und Staubtransport sowie Ventilatoren für staubbeladene Luft