Termékek jackek (16)

Le vérin électrique complètement équipé contient déjà l’unité moteur-réducteur y compris le frein-moteur, une sonde de réverbération du son à 2 canaux et deux interrupteurs de fin de course. Toutes les conduites de raccordement sont directement sortis pour faciliter la mise en service, en particulier en vue du fonctionnement par CPL.

Mit kraftvollen Kolbenschlägen, angeschlossen an einen baustellenüblichen Kompressor, trieben die Rohr-Vortriebs-Maschinen aus dem ROVER-TECHNIK-Lieferprogramm, dynamisch schlagend, Stahl-Schutzrohre offen durchs Erdreich. Nach erfolgter Durchpressung wird der Erdkern mittels Wasser und Druckluft aus dem Rohrstrang herausgedrückt. Schlagkräftig... Mit kraftvollen Kolbenschlägen, angeschlossen an einen baustellenüblichen Kompressor, trieben die Rohr-Vortriebs-Maschinen aus dem ROVER-TECHNIK-Lieferprogramm, dynamisch schlagend, Stahl-Schutzrohre offen durchs Erdreich. Nach erfolgter Durchpressung wird der Erdkern mittels Wasser und Druckluft aus dem Rohrstrang herausgedrückt. Schlagkräftige Argumente, die für sich sprechen: • Keine kostspieligen Produktionsunterbrechungen mehr • Kein Zerstören von wertvollen Grundstücks-Oberflächen • Kostengünstiger als die offene Bauweise • Horizontale und vertikale Rohrverlegung, jeder Winkel ist möglich • Felsiger Untergrund ist kein Problem Überzeug

Use: Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Incorporates a standard vertical panel, Type “PAV-(…)”. Reliable Connection Conductor Diameter:0.2 mm to 2.0 mm PG13 for Cable Diameter:Up to 15 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S On Request:Type C Colour Designations:All international colour designations are available.

Das Heben von Schienenfahrzeugen und kompletten Zügen gehört zu unseren Kernkompetenzen. Mit 50 Jahren Erfahrung gehören wir heute zu den Marktführern im Bereich der Hebetechnik für Schienenfahrzeuge sowie der Ausrüstung von Schienenfahrzeug-Werkstätten.

Folding jack „Universal“ U1500 very robust design with supporting cross tube of square tube and side welded tube socket for installation of railing posts as back guard to protect from falling or for top mounted parts.

-suitable for charging retention basins, depots for hazardous materials, drum stacking pallets etc. -with a towing bar -swivel castors Ø 180 mm, fixed castors Ø 80 mm -Type FHR 600 G for steel bunghole drums, steel drums with a lid, steel rolling hoop drums, plastic l-ring drums, plastic double l-ring drums, plastic drums with a lid, rectangular drums and conical drums with a lid ranging from 110 to 220 litres also open drums -individual construction on request: e.g. stainless steel for “ex”-zones in compliance with “ATEX 95” material:steel

We are not dictated to by standards. If at all, our sole and uncompromising standard is to produce the best possible knife for your task. We are your experts in this.

Use: Installation clamp for ceramic jack, high-temperature Jack or miniature jack for panel installation. . Mechanical design: • All parts, including the screws, are made of stainless steel. Order no.: • A-20.210 Clamp for ceramic jack. • A-20.307 Clamp for high-temperature jack.

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and • spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection. Conductor Diameter:0.002 mm to 0.6 mm Max. cable diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection. Reliable Connection Conductor Diameter:0.002 mm to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. Conductor Diameter:0.2 mm to 2.0 mm Max. Cable Diameter:8.0 mm Temperature load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple material and spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection. Reliable Connection Conductor Diameter:0.002 mm to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. Conductor Diameter:0.2 mm to 2.0 mm Max. Cable Diameter:8.0 mm Temperature load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.