Termékek jacks (103)

Version standard galvanisée, passivée bleue. Finition inox naturel Les vérins de nivellement avec compensation à rotule et contreécrou sont utilisés dans le réglage et la mise à niveau de moteurs, de groupes, d'éléments de motorisation et de lignes de fabrication. Ces derniers permettent d'obtenir une installation précise en cas de montage de surfaces d'appui jusqu'à un angle d'inclinaison d'env. 4°. Le contreécrou sert à bloquer un réglage prédéfini. Référence:27706 Accessoires:Rondelle de compensation à rotule 07460

Sollevatore a cricchetto Farm Jack 48

Sollevatore a cricchetto farm Jack 60

Sandbleche (Rot) für Farm Jack

Elevador de bastidor Farm Jack 60

La répétabilité est de ± 0,3 mm. Pour ôter les copeaux et la poussière, retirer les deux caches de recouvrement (2) et injecter de l'air comprimé par le haut. Consignes d´utilisation Actionnement au moyen d'une clé à chocs à couple réglable ou manuel à l'aide d'une clé de serrage. Avantages Automatisables Forces de serrage élevées Serrage rapide Matière: Acier de traitement. Corps de base :bruni Surface d'appui:traitée et rectifiée

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, oil, offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

Farm Jack

Housse pour cric manuel Farm Jack

Cric manuel Farm Jack 48

La sauterelle s'ajuste automatiquement à la hauteur de la pièce à bloquer. Ajustement en continu de la hauteur de serrage dans la limite de 35 mm pour une force de serrage à peu près constante ou modification manuelle de la position de la vis de pression. Une vis d'arrêt située sous le levier, dans l'articulation, permet d'ajuster la force de serrage jusqu'à 2 500 N selon les exigences. La disposition des trous dans la plaque de base convient pour les entraxes métrique et en pouce. Référence:05300

Kommissionierstapler der SP Serie Kommissionieren auf höchstem Niveau Vom Freisicht-Plattformfenster bis hin zum grundsoliden Stabilitätssystem sind die Kommissionierstapler der SP Serie dafür konzipiert, die Bediener optimal zu unterstützen und Leistung, Produktivität und Effizienz deutlich zu steigern. Flexibilität für vielfältige Einsatzbereiche Die SP Serie ist in sechs Varianten mit Greifhöhen von 8 bis 11,3 Metern erhältlich. Wir haben also für jeden Einsatzbedarf das richtige Fahrzeug im Programm. Die vier Kommissionierstapler mit feststehender Gabel sind ideal zum Aufnehmen sperriger, großer Artikel sowie für Lager, in denen Plattformverlängerungen und Rollbehälter anstelle von Paletten eingesetzt werden. Bei den beiden Kommissionierstaplern mit Zusatzhub können Ihre Bediener die Kommissionierhöhe so einstellen, dass tiefes Bücken und weites Strecken nur noch selten notwendig sind.

Use: Installation clamp for ceramic jack, high-temperature Jack or miniature jack for panel installation. . Mechanical design: • All parts, including the screws, are made of stainless steel. Order no.: • A-20.210 Clamp for ceramic jack. • A-20.307 Clamp for high-temperature jack.

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and • spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Corps de base : bruni. Doigt : traité et bruni. Indication de dessin : M = Vis à bille orientable N = Trou lamé pour vis CHC à six pans creux DIN 912 1) Vis anti-rotation 2) Vis support 3) Ecrou Référence:02334 Matière:Acier de traitement Corps de base:bruni Doigt:traité et bruni

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection. Conductor Diameter:0.002 mm to 0.6 mm Max. cable diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Coppia rampe (con un posto per Farm Jack)

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Single Jack Chain

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection. Reliable Connection Conductor Diameter:0.002 mm to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Vérin pneumatique à double effet au design optimisé pour la construction selon DIN ISO 15552. Tige de piston avec filetage, détecteur de position et amortisseur pneumatique réglable. Grâce à leur conception solide, ces vérins sont utilisés pour un grand nombre d'applications. Référence:12000 Tube de vérin:aluminium Couvercle:aluminium injecté Tige de piston:acier de traitement 1.0503 Joint de piston et joint de tige de piston:PU Tube de vérin:anodisé Couvercle:laqué Tige de piston:chromée dure Fonctionnement:double effet Fluide de fonctionnement:air filtré et séché, huilé ou non huilé Pression de service:1 à 10 bar Amortissement:amortisseur pneumatique bilatéral, réglable Position de montage:libre Raccord pneumatique:DIN EN ISO 228/1 Plage de température:-20 °C jusqu’à +80 °C

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. Conductor Diameter:0.2 mm to 2.0 mm Max. Cable Diameter:8.0 mm Temperature load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Filet trapézoïdal autobloquant, vis à frein intégré. Nota : Le perçage traversant permet un serrage et un positionnement simple de la pièce. Référence:02171 Matière:Inox 1.4305

Winch cover FARM JACK

Traps set (red) for Farm Jack

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple material and spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Clock Chain Dia.(MM):1.0 - - - -2.8MM

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection. Reliable Connection Conductor Diameter:0.002 mm to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. Conductor Diameter:0.2 mm to 2.0 mm Max. Cable Diameter:8.0 mm Temperature load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

Force manuelle admissible pour la poignée. Accessoires : Poignée standard 06355. Poignée dynamométrique 06357. Référence:04402 Came:acier à outil, trempé et bruni Manche:acier de traitement, trempé et bruni Poignée:acier de traitement, bruni Boule:plastique thermodurcissable PF 31, noir