Termékek kávézó berendezési elemek (445)

Made of AISI 316 stainless steel for aggressive environments

Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

Hochauflösendes magnetisch absolutes Längenmesssystem für CNC Werkzeugmaschinen mit robuster Bauform. Der Lesekopf wird kontaktlos geführt ohne Kugellager Messlängen: 70mm – 3.770mm Genauigkeit: 3+3ML/1.000 µm(p-p) Max. Auflösung: 5nm Max. Ansprechgeschwindigkeit: 200m/min Extrem robust gegenüber Vibrationen und Schock Unempfindlich gegenüber Verschmutzungen wie Öl, Wasser, Feuchtigkeit und Staub aufgrund des magnetischen Funktionsprinzips Gleiches thermisches Ausdehnungsverhalten wie Stahl bzw. das Maschinenbett aus Gusseisen Kompatibel mit den seriellen Protokollen von Fanuc, Mitsubishi und Siemens Siemens DriveCliQ Version ist Functional Safety zertifiziert Messlängen:70mm - 3770mm Max. Auflösung :5nm Genauigkeit :3+3L/1000µm P-P Schnittstellen:DRIVE-CiQ, FANUC, MITSUBISHI Max. Ansprechgeschwindigkeit :200m/min Schutzklasse:IP67

The probe's measurement data can be sent to a PLC via Ethernet, EtherNet/IP, PROFINET or EtherCAT fieldbus Fieldbus compatible interface module: MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT) Up to 16 MG80-CM counter modules for measuring probes can be connected to each main module. Up to 64 MG80-CM or touch probes can be connected to MG80-NE via max. 3 LINK connections Up to 255 MG80-CM or measuring probes can be connected to MG80-EI/PN via LINK connections. Theoretically, up to 65,535 MG80-CM or mestasters can be connected to MG80-EC via LINK connections. MG80-CM Counter module for connection of one DK or DT series probe (with MT13) Easy installation on DIN mounting rail LZ80-K1/K2 I/O module for MG80-EI, MG80-PN and MG80-EC Equipped with 8 inputs and 8 outputs Interface moduls for :Ethernet, Ethernet/IP, Profinet, EtherCAT compatible gauges:DK-series and DT-series with MT13 adapter

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines measuring range:50mm Accuarcy:2µm (p-p) Resolution:0,5µm Max. response speed:250m/min Reference mark:1 Clamping diameter:20mm Output signal:TTL linedriver RS422 Power supply:5V DC

The V shape of the shaft support is the result of purposeful internal development work at Föhrenbach. The most important advantage comes from having the greatest possible distance between the shafts and above all in the lay-out of the four ball-bearing housings whose loadbearing rows of balls are located underneath the shaft. The unitized, modular type like design realized with these devices enables to cover a wide range of application specific solutions. Manufactured in standard widths from 75 to 425 mm and in lenghts of up to 4000 mm, the products are designed to provide solutions that allow to cover almost all handling and mounting tasks that need to be met. An experience of long standing assures for competent solutions.

Filter regulator of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 1650 to 4500 Nl / min Pressure range up to 15 bar

Filter + lubricator combination of the Comfort series Sizes: 1/4" to 1" Filter fineness: 5 – 20 – 50 µm Flow at 6 bar with ∆p 1 bar: 1350 to 5000 Nl / min Pressure range up to 15 bar

SOLENOID VALVES IN BRASS AND STAINLESS STEEL

Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment

The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

With and without adjustable hysteresis Pressure ranges from -200 to -900 mbar

The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

SPECIAL VALVES FOR PNEUMATICS, HYDRAULICS, VARIOUS MEDIAs

Filter water separator of the Comfort series Sizes: 1/4" to 1" Filter fineness: 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 700 to 920 Nl / min Pressure range up to 15 bar

Lines for compressed air and other media

High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines measuring range:25mm Accuarcy:2µm (p-p) Resolution:0,5µm Max. response speed:250m/min Reference mark:1 Design:Straight / Angeld Plunger actuation:Spring Output signal:TTL Linedriver RS422 Clamping diameter:20mm

In sizes 1/8 - M14 - M20 Switching ranges from 30 to 130 °C

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines Measuring range:100mm Accuarcy:4µm (p-p) Resolution:0,5µm Max. response speed:250m/min Reference mark:1 Plunger actuation:Spring Output signal:TTL linedriver RS422 Power supply:5V DC

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control Channels:2 channals for probes of DK-series Resolution:0,5µm / 1µm / 5µm Measuring functions:Current/MAX/MIN/P-P Axis calculation:ADD/SUB Comparator function:HIGH/GO/LOW output with relay or Open collector Power supply:With power supply PSC23 (Optional)

Double-acting pneumatic cylinder for integrated installation in clamping tools.

Filter regulator + lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 260 Nl/min Pressure range up to 15 bar

Below are a few reference objects that we have been able to work on as part of a wide variety of project tasks in recent years: Audi: all RS models since 2000, R8, R8 2015 Bentley: Mulsanne, Bentayga BMW/Mini: Clubman, 3 series Ferrari: 599 GTO Lamborghini: Gallardo, Murcielago, Aventador Mercedes: S-Class, SLS, Actros Porsche: 997, 911 I panel, door trim, center console, greenhouse, interior trim, trim, steering wheel, seats, carpet trim, infotainment system, instrument cluster, mirror, selector lever, switch panel, trunk, engine compartment cover. Wheels, brakes, wheel suspension, exhaust system, engine components, tank, lines. Plastic injection moulding, metal casting, forging, forming, tube processing, painting, galvanic surfaces, lamination, leather covering, upholstery and sewing.

Large-volume pneumatic cylinder with through-piston rod for use as a die-cushion press balancing cylinder in a mechanical press.

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

In sizes 1/8 - 1/2 - 3/8 - M 10 x 1 - M 12 - M14 - M22 Switching ranges from 30 - 90 °C

Filter + water separator combination of the Comfort series Sizes: 1/4" to 1" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 600 to 910 Nl / min Pressure range up to 15 bar

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants. measuring range:12mm Accuarcy:6µm (p-p) / 10µm (p-p) Resolution:1µm / 5µm Max. response speed:100m/min Plunger actuation:spring / Pneumatic push with DZ176 (optional) Output signal:TTL line driver RS422 with MT14 (optional) Compatible display:LT10A / LT11A Series