Termékek kávézó berendezési elemek (445)

SILENCERS, PRESSURE GAUGES, CLUTCHES

Interferometric angle measuring system, non-contact, open design for resolutions of up to 1.5nrad. The BH20 angle measuring system in open non-contact design is based on interferometric signal scanning. It offers extremely high resolutions and repeatability. The interferometric scanning produces an extremely high signal quality with extremely low noise. Max. resolution:1,5nrad Grating period of encoder:1µm Signal period:250nm Available encoder diameters:12mm, 27mm, 36mm, 41mm Output signals:1Vpp, TTL, BISS-C, USB, 40bit binary Reference mark:1

Available in sizes 1/8 - 1/4 - M10 x 1 - M12 x 1.5 - 1/8 NPT Piston pressure switch with control ranges from 30 to 300 bar Diaphragm pressure switch with control ranges from 0.2 to 100 bar

Output signal: A/B quadrature signal, compliant with EIA-422 with MJ100 / MJ110 (sold separately) Maximum resolution: 5µm Maximum response speed: 300m/min (varies depending on read head and setting) Extremely insensitive to even the harshest environments (IP65) Resistant to oil, dust, vibration and shock Resolution:5µm Output signal:TTL Linedriver RS422 with MJ100 / TTL Open collectorwith MJ110 Max. response speed:5m/s Compatible with linear encoder:SL110 /SL130 Compatible Interpolator:MJ100 / MJ110

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes. Measuring range:155mm / 205mm Accuarcy:5µm / 6µm (p-p) Resolution:0,5µm Max. response speed:250m/min Reference mark:1 Plunger actuation:Magnetic tip (no spring) Output signal:TTL linedriver RS422 Power supply:5V DC

Inexpensive, robust pneumatic cylinders specially developed for use in tire changers for passenger cars and commercial vehicles.

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

CIC provides on-site support with experienced specialists when your supply chains threaten to break down, bottlenecks endanger your supply and ability to deliver, or crises need to be mastered quickly, flexibly and internationally. We offer you : Supply chain management Supply Chain Protection Bottleneck management at the supplier Bottleneck management in your production Bottleneck management for quality problems Bottleneck management for tool problems Bottleneck management for personnel problems Bottleneck management in insolvencies Securing the supply of parts Crisis management, also internationally

On-off valve of the Comfort series Sizes: 1/4" to 1" Flow rate at 6 bar with ∆p 1 bar: 1850 to 5200 Nl / min Pressure range up to 15 bar

Housing parts made of steel, stainless steel, aluminium, brass. Made of solid material, profile material, cast blanks and pressed parts. With and without surface treatment.

Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar

Implementation of relocations of production facilities and production lines, e.g Dating Location search Project coordination Startup control Supplier qualification Production control Logistics control

Pressure regulator of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1 bar: 2050 to 6200 Nl / min Pressure range up to 15 bar

Valve+Filter+Regulator+Oiler Maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 1000 to 3900 Nl / min Pressure range up to 15 bar

Compact series lubricators with plastic housing Sizes: 1/8" and 1/4" Flow rate at 6 bar with ∆p 1 bar: 700 Nl/min Pressure range up to 15 bar

Compact series filters with plastic housing Sizes: 1/8" and 1/4" Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 800 Nl / min Pressure range up to 15 bar

Control ranges from 30 to 300 bar. In sizes 1/8 - 1/4 - M 10 x 1 - M 12 x 1.5.

Compact short-stroke cylinder with a diameter of 20 in a rectangular block shape with mounting holes on the front.

CIC will be happy to support you in planning, securing, controlling, monitoring and optimizing your quality management, e.g. with: advanced quality planning supplier quality purchased part quality component qualification product engineering Supplier Audit Internal audits Process monitoring and process optimization Production control and monitoring at the supplier bottleneck coordination production readiness tool design Tool tracking mold trials Gauge concepts and gauge acceptance component measurements Resident Engineering Task Force Abbreviations such as APQP, PEP, FMEA, PPAP, 8-D, 5Why are not foreign words for us but common tools.

For oil, petrol, diesel fuels

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function Channels:1 or 2 gauge of DT-Series Resolution:1µm / 5µm / 10µm Measuring function:Current/MAX/MIN/P-P Axis Calculation:ADD/SUB Comparator function:High/Go/Low via Open collector Output I/O:NPN Open collector In/Out; Optional: RS2323 or BCD Power supply:9-26V DC Installation dimensions for front panel:72mm x 72mm

Filter regulator of the compact series with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 600 Nl/min Pressure range up to 15 bar

Pressure regulator of the compact series, quick exhaust Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

Made of brass, steel, stainless steel

PROCESS VALVES, ANGLE SEAT VALVES FOR VARIOUS MEDIA

Single-acting pneumatic cylinder diameter 20 as a spare part for the no longer produced Wabco Westinghouse series 421 427.

motion control components BLDC motors, servos, DC motors, FOC Sinus- & Blockcommutated

Embedded Software Komponenten für Getriebesteuergeräte

Embedded Software Komponenten für Lenkunterstützungssysteme

Umfasst Sonder-Schlauchanschlüsse, Sonder-Adapter, Sonder-Schlauchkonstruktionen und andere Sonderanfertigungen an Schlauchanschlußarmaturen oder Schweißkonstruktionen.