Termékek kávézó berendezési elemek (1493)

SPECIAL VALVES FOR PNEUMATICS, HYDRAULICS, VARIOUS MEDIAs

Filter water separator of the Comfort series Sizes: 1/4" to 1" Filter fineness: 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 700 to 920 Nl / min Pressure range up to 15 bar

Lines for compressed air and other media

High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines measuring range:25mm Accuarcy:2µm (p-p) Resolution:0,5µm Max. response speed:250m/min Reference mark:1 Design:Straight / Angeld Plunger actuation:Spring Output signal:TTL Linedriver RS422 Clamping diameter:20mm

In sizes 1/8 - M14 - M20 Switching ranges from 30 to 130 °C

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines Measuring range:100mm Accuarcy:4µm (p-p) Resolution:0,5µm Max. response speed:250m/min Reference mark:1 Plunger actuation:Spring Output signal:TTL linedriver RS422 Power supply:5V DC

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control Channels:2 channals for probes of DK-series Resolution:0,5µm / 1µm / 5µm Measuring functions:Current/MAX/MIN/P-P Axis calculation:ADD/SUB Comparator function:HIGH/GO/LOW output with relay or Open collector Power supply:With power supply PSC23 (Optional)

Double-acting pneumatic cylinder for integrated installation in clamping tools.

Filter regulator + lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 260 Nl/min Pressure range up to 15 bar

Below are a few reference objects that we have been able to work on as part of a wide variety of project tasks in recent years: Audi: all RS models since 2000, R8, R8 2015 Bentley: Mulsanne, Bentayga BMW/Mini: Clubman, 3 series Ferrari: 599 GTO Lamborghini: Gallardo, Murcielago, Aventador Mercedes: S-Class, SLS, Actros Porsche: 997, 911 I panel, door trim, center console, greenhouse, interior trim, trim, steering wheel, seats, carpet trim, infotainment system, instrument cluster, mirror, selector lever, switch panel, trunk, engine compartment cover. Wheels, brakes, wheel suspension, exhaust system, engine components, tank, lines. Plastic injection moulding, metal casting, forging, forming, tube processing, painting, galvanic surfaces, lamination, leather covering, upholstery and sewing.

Large-volume pneumatic cylinder with through-piston rod for use as a die-cushion press balancing cylinder in a mechanical press.

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

In sizes 1/8 - 1/2 - 3/8 - M 10 x 1 - M 12 - M14 - M22 Switching ranges from 30 - 90 °C

Filter + water separator combination of the Comfort series Sizes: 1/4" to 1" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 600 to 910 Nl / min Pressure range up to 15 bar

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants. measuring range:12mm Accuarcy:6µm (p-p) / 10µm (p-p) Resolution:1µm / 5µm Max. response speed:100m/min Plunger actuation:spring / Pneumatic push with DZ176 (optional) Output signal:TTL line driver RS422 with MT14 (optional) Compatible display:LT10A / LT11A Series

SILENCERS, PRESSURE GAUGES, CLUTCHES

Interferometric angle measuring system, non-contact, open design for resolutions of up to 1.5nrad. The BH20 angle measuring system in open non-contact design is based on interferometric signal scanning. It offers extremely high resolutions and repeatability. The interferometric scanning produces an extremely high signal quality with extremely low noise. Max. resolution:1,5nrad Grating period of encoder:1µm Signal period:250nm Available encoder diameters:12mm, 27mm, 36mm, 41mm Output signals:1Vpp, TTL, BISS-C, USB, 40bit binary Reference mark:1

Available in sizes 1/8 - 1/4 - M10 x 1 - M12 x 1.5 - 1/8 NPT Piston pressure switch with control ranges from 30 to 300 bar Diaphragm pressure switch with control ranges from 0.2 to 100 bar

Output signal: A/B quadrature signal, compliant with EIA-422 with MJ100 / MJ110 (sold separately) Maximum resolution: 5µm Maximum response speed: 300m/min (varies depending on read head and setting) Extremely insensitive to even the harshest environments (IP65) Resistant to oil, dust, vibration and shock Resolution:5µm Output signal:TTL Linedriver RS422 with MJ100 / TTL Open collectorwith MJ110 Max. response speed:5m/s Compatible with linear encoder:SL110 /SL130 Compatible Interpolator:MJ100 / MJ110

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes. Measuring range:155mm / 205mm Accuarcy:5µm / 6µm (p-p) Resolution:0,5µm Max. response speed:250m/min Reference mark:1 Plunger actuation:Magnetic tip (no spring) Output signal:TTL linedriver RS422 Power supply:5V DC

Inexpensive, robust pneumatic cylinders specially developed for use in tire changers for passenger cars and commercial vehicles.

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

CIC provides on-site support with experienced specialists when your supply chains threaten to break down, bottlenecks endanger your supply and ability to deliver, or crises need to be mastered quickly, flexibly and internationally. We offer you : Supply chain management Supply Chain Protection Bottleneck management at the supplier Bottleneck management in your production Bottleneck management for quality problems Bottleneck management for tool problems Bottleneck management for personnel problems Bottleneck management in insolvencies Securing the supply of parts Crisis management, also internationally

On-off valve of the Comfort series Sizes: 1/4" to 1" Flow rate at 6 bar with ∆p 1 bar: 1850 to 5200 Nl / min Pressure range up to 15 bar

Housing parts made of steel, stainless steel, aluminium, brass. Made of solid material, profile material, cast blanks and pressed parts. With and without surface treatment.

Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar

Implementation of relocations of production facilities and production lines, e.g Dating Location search Project coordination Startup control Supplier qualification Production control Logistics control

Pressure regulator of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1 bar: 2050 to 6200 Nl / min Pressure range up to 15 bar

Valve+Filter+Regulator+Oiler Maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 1000 to 3900 Nl / min Pressure range up to 15 bar