Termékek kávézó berendezési elemek (243)

The base rail for the D-Dome 6.10 system from K2 is suitable for flat roofs with an east-west elevation. It is made of aluminum and is 2.25 meters long. The base rail set is delivered pre-assembled including end plate, dome SD and mat. ITEM NUMBER:MO-6237

With the Alumero lightweight elevation, you can increase the module inclination by 5 – 7° (depending on the arrangement of the module) with trapezoidal sheet metal roofing. With only a slight roof pitch, this can noticeably increase the yield and the self-cleaning effect of the modules. Elevated installation results in larger row spacing. The lightweight trapezoidal sheet elevation is based on a stronger version of the proven Alumero trapezoidal sheet metal rail with a length of 400 mm ITEM NUMBER:MO-539

Substructure Plate Head Screw V2a With Torx, 8 X 100m - SHOP ITEM NUMBER:MO-528

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock. ITEM NUMBER:MO-483

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock. ITEM NUMBER:MO-2768

RST20i3 connector, straight, 3 positions, plug, connection type screw connection, rated voltage 250 V, rated current 20 A, cable diameter 6 – 10 mm, coding color / contact insert black ITEM NUMBER:EPP-WLND-STKR

suitable for slate roofing thanks to its straight and flat design. Please note that work on slate roof ITEM NUMBER:MO-533

5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in. ITEM NUMBER:EPP-KBL-STKR-BC-5M

Zylinderköpfe, Ventilkörbe, Einspritzpumpen und Einspritzkomponenten, Drehzahlregler, Turboladern und deren Komponenten, Kurbelwellen, Pleuelstangen, Wasserpumpen, Ölpump

The classic end clamp for modules with a frame height of 35 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock ITEM NUMBER:MO-498

The K2 MiniRail Set is suitable for installing a photovoltaic system on trapezoidal sheet metal roofs. The innovative short rail system is statically optimized and quick and easy to assemble. The module alignment and module clamping is universal. ITEM NUMBER:MO-6037

RST20i3 connector, angled 90°, 3 positions, plug, connection type screw connection, rated voltage 250 V, rated current 20 A, cable diameter 6 – 10 mm, coding color / contact insert black ITEM NUMBER:EPP-WLND-WSTKR

Manufacturer: Alumero Manufacturer item no.: 9159990 + 1534308 Article No.: MO-787 Stück is VPE: 100 is Carton ITEM NUMBER:MO-787

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller ITEM NUMBER:EPP-VKBL-5M

The highlights at a glance Manufacturer: TP Link Manufacturer item number: 465634 Article No.: MO-2917 ITEM NUMBER:MO-2917

The Alumero cross connector can be quickly positioned and fastened in the base rail. The second rail layer is also quickly and securely connected with the quick attachment. ITEM NUMBER:MO-474

The mounting systems from EPP SOLAR are quick to assemble, robust and durable. Not only are they cost effective, they are equally suitable for new, existing and renovated roofs. EPP SOLAR offers photovoltaic mounting systems for both pitched and flat roofs. A major advantage is that the mounting systems can withstand heavy snow loads. ITEM NUMBER:EPP-MTG-AS-PL

High pressure force thanks to the large contact surface and good power transmission thanks to the Torx mount. Fast assembly without pre-drilling. ITEM NUMBER:MO-5733

With an additional current transformer, the production data of the inverter can be recorded and visualized in the VARTA monitoring portal. As a result, you do not need a Solar-Log data logger to integrate the inverters. ITEM NUMBER:MO-3036

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller. ITEM NUMBER:EPP-VKBL-2M

The K2 MiniFive End 9 is part of the MiniRail system and is used to elevate the module on trapezoidal sheet metal roofs. Elevating the modules with the MiniFive End 9 creates air circulation on the back of the module and optimizes the angle of incidence, which is reflected in an increase in the yield of the PV system ITEM NUMBER:MO-6039

The rail connector is supplied in a set with the associated screws and is part of the K2 SingleRail system for pitched roofs. The connecting element connects two rails and is made of aluminium. ITEM NUMBER:MO-6083

The base rail for the S-Dome 6.10 system from K2 is suitable for south-facing flat roofs. It is made of aluminum and is 1.45 meters long. The base rail set is delivered pre-assembled including end plate, dome SD and mat. The Mat S consists of EPDM and absorbs or compensates for tolerances. High coefficients of friction reduce the ballast. ITEM NUMBER:MO-6214

The classic end clamp for modules with a frame height of 50 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock. ITEM NUMBER:MO-500

Necessary accessories for the Varta Split Core current transformer for connection. ITEM NUMBER:MO-3037

We offer a product designed for bus switching, which can be connected via bus cable. With our bus circuit accessories, you can expand and connect different parts of your system quickly and easily. ITEM NUMBER:HM-AC-B

With the Alumero lightweight elevation, you can increase the module inclination by 5 – 7° (depending on the arrangement of the module) with trapezoidal sheet metal roofing. With only a slight roof pitch, this can noticeably increase the yield and the self-cleaning effect of the modules. Elevated installation results in larger row spacing. The lightweight trapezoidal sheet elevation is based on a stronger version of the proven Alumero trapezoidal sheet metal rail with a length of 400 mm. ITEM NUMBER:MO-538

Connection cable with MC4-compatible plug and wire sleeve ready-made Plus and minus set – for wiring parallel circuits Simply plug into the connection cable of the junction box on the module, or into the distributor plug of your photovoltaic system, to the solar charge controller. ITEM NUMBER:EPP-VKBL-10M

The K2 universal module middle clamp OneMid is a practical and simple component for the K2 system. It is suitable for module frames with a height of 30 – 42 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamps are compatible with the K2 systems Single Rail, Cross Rail*, Speed ​​Rail, Multi Rail and Solid Rail.* ITEM NUMBER:MO-6042

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock. ITEM NUMBER:MO-3306