Termékek kávézó berendezési elemek (187)

Description:The PIC24EP256GP206-I/PT is a 16-bit microcontroller from the PIC® 24EP series of Microchip Integrated Circuits (ICs). It is based on the PIC24E core processor and has a program memory size of 256KB (85.5K x 24). It operates on a supply voltage of 3 V to 3.6 V and has a maximum clock frequency of 11 MHz. It is packaged in a 64-TQFP case and has an operating temperature range of -40°C ~ 85°C (TA). Features: - 16-bit core processor - 256KB (85.5K x 24) program memory size - Maximum clock frequency of 11 MHz - Operating supply voltage of 3 V to 3.6 V - 64-TQFP package - Operating temperature range of -40°C ~ 85°C (TA) Applications: The PIC24EP256GP206-I/PT is suitable for a wide range of applications, including automotive, industrial, medical, and consumer electronics. It can be used for motor control, power management, data acquisition, and signal processing. Kynix Part #:KY32-PIC24EP256GP206-I/PT Manufacturer Part #:PIC24EP256GP206-I/PT Product Category:Microcontrollers Manufacturer:Microchip Technology Description:MCU PIC 16-Bit -40°C ~ 85°C (TA) FLASH 256KB (85.5K x 24) PIC® 24EP 70 MIPs 64-TQFP (10x10) Package:64-TQFP Quantity:7639 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The Qualcomm Interface AR8031-AL1B is a surface mount Ethernet transceiver designed for use in a wide range of applications. It is capable of operating over a temperature range of -40°C to 85°C and is powered by a 3.3V supply. The AR8031-AL1B is compliant with the IEEE 802.3 standard and supports 10/100/1000 Mbps data rates. Features: • Compliant with IEEE 802.3 standard • Supports 10/100/1000 Mbps data rates • Low power consumption • Surface mount design • Operating temperature range of -40°C to 85°C • Powered by a 3.3V supply Applications: The Qualcomm Interface AR8031-AL1B is suitable for a wide range of applications, including: • Industrial automation • Automotive • Networking • Telecommunications • Medical • Consumer electronics Kynix Part #:KY32-AR8031-AL1B Manufacturer Part #:AR8031-AL1B Product Category:Interface - Drivers, Receivers, Transceivers Manufacturer:Qualcomm Description:Surface Mount -40°C ~ 85°C Ethernet Transceiver 3.3V Package:48-WFQFN Exposed Pad Quantity:17598 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

Following the immensely successful first-generation Cyclone® device family, Altera® Cyclone II FPGAs extend the low-cost FPGA density range to 68,416 logic elements (LEs) and provide up to 622 usable I/O pins and up to 1.1 Mbits of embedded memory. Cyclone II FPGAs are manufactured on 300-mm wafers using TSMCs 90-nm low-k dielectric process to ensure rapid availability and low cost. Kynix Part #:KY32-EP2C50F672C8N Manufacturer Part #:TLV2464AMPWREP Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Package:Tape & Reel (TR)Cut Tape (CT)Digi-Reel® Quantity:14330 PCS Lead Time:3(168 Hours)

The SN74LVC1G04DBVR is a single inverter gate from Texas Instruments. It is a low-voltage CMOS device that is designed for 1.65-V to 5.5-V VCC operation. The device is housed in a SOT-23-5 package and is suitable for use in a wide range of applications. Features: • Low-voltage CMOS device • 1.65-V to 5.5-V VCC operation • SOT-23-5 package • High-impedance inputs • Low-power consumption • High-noise immunity • High-speed operation • High-output current capability • ESD protection • -40°C to 125°C operating temperature range Applications: The SN74LVC1G04DBVR is suitable for a wide range of applications, including: • Automotive • Industrial • Medical • Consumer • Portable • Computing • Networking • Telecommunications Kynix Part #:KY32-SN74LVC1G04DBVR Manufacturer Part #:SN74LVC1G04DBVR Product Category:Gates and Inverters Manufacturer:Texas Instruments Description:Inverter Surface Mount -40°C ~ 125°C Digi-ReelR Alternate Packaging 10μA 74LVC SOT-23-5 5.5 V Package:SOT-23 Quantity:Quantity:200000 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

TheB Series logic gates are constructed with P and N channel enhancementmode devices in a single monolithic structure (Complementary MOS). Their primary use is where low power dissipation and/or high noise immunity is desired. Kynix Part #:KY32-MC14001BCP Manufacturer Part #:MC14001BCP Product Category:Gates and Inverters Manufacturer:Motorola Product Category:Instrumentation Amplifier Package:Analog Devices

The MC33275DT-3.3RKG is an ON Semiconductor integrated circuit linear voltage regulator with a voltage output of 3.3V and a voltage dropout typical of 0.26V @ 300mA. It has a mounting style of SMD/SMT, a package case of TO-252-3, DPak (2 Leads + Tab), SC-63, and an operating temperature range of -40 C. It has one output, a voltage regulation accuracy of 1%, an output type of fixed, and an Ib input bias current of 1.5 mA. It is suitable for applications such as power supplies, battery chargers, and other power management applications. Kynix Part #:KY32-MC33275DT-3.3RKG Manufacturer Part #:MC33275DT-3.3RKG Product Category:Linear Voltage Regulators Manufacturer:onsemi Description:Voltage Regulators - Linear 300mA -40°C ~ 125°C 300 mA Fixed Positive Fixed MC33275 DPAK-3 Package:TO-252-3, DPak (2 Leads + Tab), SC-63 Quantity:4543 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The PIC24FJ64GB106-I/PT is a 16-bit microcontroller from Microchip Integrated Circuits (ICs) that features a 64KB FLASH program memory, 16K x 8 RAM size, 32MHz maximum clock frequency, and 16 ADC channels. It is packaged in a 64-TQFP case and has a unit weight of 0.012720 oz. Kynix Part #:KY32-PIC24FJ64GB106-I/PT Manufacturer Part #:TLV2464AMPWREP Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Package:Tape & Reel (TR)Cut Tape (CT)Digi-Reel® Quantity:14330 PCS Lead Time:3(168 Hours)

The Cypress CY7C68013A-100AXC is an application specific microcontroller that is mounted using surface mount SMD/SMT technology. It features a 40 I/O, 8051-based processor with a EZ-USB FX2LP™ series interface, including GPIF I2C USART. It is available in a 100-LQFP package and is currently in an active status. Kynix Part #:KY32-CY7C68013A-100AXC Manufacturer Part #:CY7C68013A-100AXC Product Category:Application Specific Microcontrollers Manufacturer:Cypress Semiconductor Package:SOP Quantity:200000 PCS Lead Time:3(168 Hours)

The MCP1700T-3002E/TT is a linear voltage regulator from Microchip with a positive fixed regulator-topology. It is offered in a SOT-23-3 surface mount packaging in Digi-ReelR alternate packaging. The device contains one output, with an input voltage up to 6V and quiescent current of 4uA. Kynix Part #:KY32-AD8605ARTZ Manufacturer Part #:AD8605ARTZ Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SC-74A, SOT-753 Quantity:200000 PCS Lead Time:3(168 Hours)

The Infineon IR2113STRPBF is a high and low side gate driver IC designed for use in motor control applications. It features a 25 ns rise time and a 35 ns fall time, and can handle up to 2.5 A of current. The device is available in a reel package for easy integration into production lines Kynix Part #:KY32-IR2113STRPBF Manufacturer Part #:BTS500851TMAATMA1 Product Category:Power Distribution Switches, Load Drivers Manufacturer:Infineon Package:TO-263-8, D2Pak (7 Leads + Tab), TO-263CA Quantity:13742 PCS Lead Time:3(168 Hours)

The Microchip Technology PIC18F67K22-I/MR microcontroller is a 8-bit device with 32K x 14 Flash program memory, 3 kB Data RAM, 1K x 8 EEPROM, and 28 I/O pins. It has an operating voltage range of 1.8 V to 5.5 V and an operating temperature range of -40 C. It features 11 Timers, 4 PWM channels, 10-bit ADC resolution, and I2C, SPI, and UART interfaces. The PIC18F67K22-I/MR microcontroller is suitable for a wide range of applications, including automotive, industrial, medical, and consumer electronics. It can be used for motor control, power management, data acquisition, and communication. It is also suitable for embedded systems, such as home automation, security systems, and robotics. Kynix Part #:KY32-PIC18F67K22-I/MR Manufacturer Part #:PIC18F67K22-I/MR Product Category:Microcontrollers Manufacturer:Microchip Technology Description:MCU PIC 8-Bit -40°C ~ 85°C (TA) FLASH 128KB (64K x 16) PIC® XLP™ 18K 64MHz 64-QFN Exposed Pad (9x9) Package:64-VFQFN Exposed Pad Quantity:7326 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The TI Gates and Inverters SN74LVC1G08DRLR is a single-gate AND gate surface mount device designed for use in a wide range of applications. This device is capable of operating over a temperature range of -40°C to 125°C and is available in a Digi-Reel alternate packaging. It features a low power consumption of 10μA and is powered by a 5.5 V supply voltage. The device is housed in a SOT-5 package and is ideal for use in low-power applications. It is also suitable for use in automotive, industrial, and consumer applications. The device is designed to provide reliable performance and is backed by TI's quality assurance. Kynix Part #:KY32-SN74LVC1G08DRLR Manufacturer Part #:AD8608ARZ Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SOP Quantity:200000 PCS Lead Time:3(168 Hours)

10CL120YF780I7G Intel - FPGAs (Field Programmable Gate Array) Kynix Part #:KY32-10CL120YF780I7G Manufacturer Part #:10CL120YF780I7G Product Category:FPGAs (Field Programmable Gate Array) Manufacturer:Intel Description:Cyclone® 10 LP Field Programmable Gate Array (FPGA) IC 525 3981312 119088 780-BGA Package:Tray Quantity:1 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The LMP8645HVMKE/NOPB from Texas Instruments is an instrumentation amplifier specifically designed for high accuracy data acquisition. It features a wide common mode voltage range of -2V to +76V and CMRR-Common-Mode-Rejection-Ratio of 95 dB, which minimizes noise in applications requiring high common mode rejection such as medical, industrial, and instrumentation systems. It has high gain accuracy over a wide temperature range and excellent gain non-linearity and temperature coefficient. This instrumentation amplifier operates from a 2.7 V to 12 V supply voltage and has a Maximum-Operating-Temperature of +125°C and a Minimum-Operating-Temperature of -40°C. This product is available in the TSOT Package-Case. Kynix Part #:KY32-LMP8645HVMKE/NOPB Manufacturer Part #:LMP8645HVMKE/NOPB Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Description:Lead Free Gold GULL WING Surface Mount Current Sense Amplifier 95dB 0.6V/mus -40C~125C 860kHz Package:SOT-23-6 Thin, TSOT-23-6 Quantity:59937 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:Lead Time

The MAX3232ECPWR is a low-power transceiver for RS232 communication from Texas Instruments. It is a surface mount device with a temperature range of 0°C to 70°C. It has a data rate of up to 250kbps and is available in a 16-TSSOP package. It operates from a supply voltage of 3V to 5.5V. Kynix Part #:KY32-MAX3232ECPWR Manufacturer Part #:UDN2981A Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Package:SOIC8 Quantity:3819 PCS Lead Time:3(168 Hours)

The Microchip Technology Network Interface Card (NIC) ENC424j600-I/PT is a low-cost, high-performance Ethernet controller that provides a complete 10/100 Base-T physical layer (PHY) solution. It is designed to provide a simple, cost-effective solution for embedded Ethernet applications. Features: • 10/100 Base-T PHY • Integrated MAC and PHY • Supports both SPI and parallel interfaces • Low power consumption • -40°C to 85°C operating temperature range • 44-TQFP (10x10) package • Alternate packaging available in tray Applications: The Microchip Technology Network Interface Card (NIC) ENC424j600-I/PT is ideal for a wide range of embedded Ethernet applications, including industrial automation, medical equipment, consumer electronics, and automotive. It is also suitable for applications that require low power consumption and a wide operating temperature range. Kynix Part #:KY32-ENC424j600-I/PT Manufacturer Part #:ENC424j600-I/PT Product Category:Network Interface Card (NIC) Manufacturer:Microchip Technology Description:Controller SPI, Parallel -40°C ~ 85°C Tray Alternate Packaging Ethernet 10/100 Base-T PHY 44-TQFP (1 Package:TQFP64 Quantity:3456 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The 74LVC1G08 is a single 2-input positive AND gate with a standard push-pull output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down Kynix Part #:KY32-74LVC1G08W5-7 Manufacturer Part #:TXS0102DCUR Product Category:Voltage Translators, Level Shifters Manufacturer:Texas Instruments Package:VSSOP Quantity:6080 PCS Lead Time:3(168 Hours)

The Atmel® AT25DF641 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT25DF641A, with its erase granularity as small as 4-Kbytes, makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices. Features • Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible – Supports SPI Modes 0 and 3 – Supports Atmel RapidS Operation – Supports Dual-Input Program and Dual-Output Read • Very High Operating Frequencies – 100MHz for RapidS – 85MHz for SPI – Clock-to-Output (tV) of 5ns Maximum • Flexible, Optimized Erase Architecture for Code + Data Storage Applications – Uniform 4-Kbyte Block Erase – Uniform 32-Kbyte Block Erase – Uniform 64-Kbyte Block Erase – Full Chip Erase • Individual Sector Protection with Global Protect Kynix Part #:KY32-AT25DF641A-MH-T Manufacturer Part #:AT25DF641A-MH-T Product Category:Memory Ics Manufacturer:Adesto Technologies Description:HARDWARE Synchronous Active SPI FLASH Memory -40C~85C TC 2.7V 64Mb 38mA Package:8-UDFN Exposed Pad Quantity:200000 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The DRV8872DDAR is a full and half-bridge driver IC from Texas Instruments. It is designed to drive DC motors with up to 3.6A of continuous current. It is housed in an 8-pin SOIC package and is capable of operating from a wide range of supply voltages, from 4.5V to 36V. The DRV8872DDAR features a wide range of protection features, including over-current protection, over-temperature protection, and under-voltage lockout. Kynix Part #:KY32-DRV8872DDAR Manufacturer Part #:DRV8872DDAR Product Category:Full, Half-Bridge Drivers Manufacturer:Texas Instruments Package:8-PowerSOIC (0.154, 3.90mm Width) Quantity:6045 PCS Lead Time:3(168 Hours)

The IR2181(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts. Kynix Part #:KY32-IR2181STRPBF Manufacturer Part #:LM1117MPX-3.3/NOPB Product Category:Linear Voltage Regulators Manufacturer:Texas Instruments Package:SOT223 Quantity:200000 PCS Lead Time:3(168 Hours)

This device is a dual center tap Schottky rectifier suited for switch mode power supply and high frequency DC to DC converters. Packaged in D2PAK, this device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. Features ■ Very small conduction losses ■ Negligible switching losses ■ Extremely fast switching ■ Low thermal resistance ■ Avalanche rated ■ AEC-Q101 qualified Kynix Part #:KY32-TPS3808G12DBVT Manufacturer Part #:TPS3808G12DBVT Product Category:Supervisors Manufacturer:Texas Instruments Description:IC VOLT SUPERVISOR 1.2V SOT23-6 Package :SOT23-6 Quantity:80845 PCS Lead Free Status / RoHS Status :Lead free / RoHS Compliant Lead Time:3(168 Hours)

The Intersil ISL317XE are ±15kV IEC61000 ESD Protected, 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125μA/-100μA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are routed to a concentrator via an RS-485 network, so the high allowed node count minimizes the number of repeaters required. Kynix Part #:KY32-ISL3176EIBZ Manufacturer Part #:AD8608ARZ Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SOP Quantity:200000 PCS Lead Time:3(168 Hours)

AT27LV256A-90JU-T from Microchip Technology / Atmel is a 256Kb (32K x 8) EPROM technology based memory IC with Parallel interface. Power supply voltage range is 3V ~ 3.6V and 4.5V ~ 5.5V and the access time is 90ns. The device is available in Cut Tape (CT) packaging and is specified for operating temperature from -40°C ~ 85°C (TC). Features: • Memory Capacity: 256Kb (32K x 8) • Memory Format: EPROM • Memory Interface: Parallel • Access Time: 90ns • Power Supply Voltage: 3V ~ 3.6V, 4.5V ~ 5.5V • Operating Temperature: -40°C ~ 85°C (TC) • Series: AT27LV256A • Technology: EPROM - OTP • Factory Pack Quantity: 750 • Packaging: Cut Tape (CT) Applications: AT27LV256A-90JU-T from Microchip Technology / Atmel is suitable to be used in embedded systems, consumer electronics, automotive, mission-critical sensors, IoT, and industrial equipment. Kynix Part #:KY32-AT27LV256A-90JU-T Manufacturer Part #:AT27LV256A-90JU-T Product Category:Memory Ics Manufacturer:Microchip Technology Description:Non-Volatile -40°C ~ 85°C (TC) 32-PLCC AT27LV256A 3V ~ 3.6V, 4.5V ~ 5.5V Package:32-PLCC Quantity:On Order Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:Send email to learn lead time

FEATURES 3.3V Operation LV-PECL Enable/Disable Tape and Reel (2,000 pcs. STD) Kynix Part #:KY32-XTR111AIDGQT Manufacturer Part #:XTR111AIDGQT Product Category:Sensor and Detector Interfaces Manufacturer:Texas Instruments Description:550μA Voltage 3-Wire Surface Mount Voltage 10-MSOP-PowerPad Current Transmitter Package:10MSOP Quantity:8557 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The ATMEL ATmega168-20AU is an 8-bit AVR microcontroller with 16KB of Flash memory, 32-TQFP (7x7) package, and operating temperature range of -40°C to 85°C (TA). Features: • 8-bit AVR microcontroller • 16KB of Flash memory • 32-TQFP (7x7) package • Operating temperature range of -40°C to 85°C (TA) • 20MHz clock speed • On-chip debug support • In-system programming and debugging • Low power consumption • Enhanced I/O capabilities • Up to 16 external interrupts • Up to 8-channel 10-bit A/D converter • Up to 4 USARTs Applications: The ATMEL ATmega168-20AU is suitable for a wide range of applications, including: • Automotive • Industrial control • Robotics • Home automation • Security systems • Medical devices • Consumer electronics • Wearable devices • Networking and communications Kynix Part #:KY32-ATMEGA168-20AU Manufacturer Part #:ATMEGA168-20AU Product Category:Microcontrollers Manufacturer:Microchip Technology Description:MCU AVR 8-Bit -40°C ~ 85°C (TA) FLASH 16KB (8K x 16) AVR® ATmega 20MHz 32-TQFP (7x7) Package:QFP Quantity:10518 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The VNQ5050KTR-E is a high side power distribution switch and load driver integrated circuit (IC) from STMicroelectronics. It has an operating temperature range of -40°C to 150°C (TJ) and is packaged in a 24-SOP (0.295", 7.50mm Width) Exposed Pad SMD/SMT package. It has a minimum supply voltage of 4.5V and a non-inverting configuration. The turn-on delay time is 15000 ns and the ratio of output to input is 1:1. It is available in Digi-ReelR Alternate Packaging. Kynix Part #:KY32-A3930KJPTR-T Manufacturer Part #:A3930KJPTR-T Product Category:Motor Drivers and Controllers Manufacturer:ALLEGRO Package:QFP-48 Quantity:149 PCS Lead Time:3(168 Hours)

The ITT Cannon D Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution to any interconnect problem. Ideally suited for Kynix Part #:KY32-AMC1200BDWVR Manufacturer Part #:AMC1200BDWVR Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Package:SOIC8 Quantity:3819 PCS Lead Time:3(168 Hours)

The Analog Devices Inc. Interface - CODECs AD1938YSTZ is a serial interface CODEC that is designed to provide high-quality audio performance. It features a 24-bit resolution, a temperature range of -40°C to 105°C, and a 48-LQFP (7x7) package. It is powered by a 3 V to 3.6 V supply voltage. Features: • 24-bit resolution • Temperature range of -40°C to 105°C • 48-LQFP (7x7) package • Powered by a 3 V to 3.6 V supply voltage • Low power consumption • High-quality audio performance • Serial interface Applications: The Analog Devices Inc. Interface - CODECs AD1938YSTZ is suitable for a wide range of applications, including audio and video systems, digital signal processing, and multimedia applications. It is also suitable for use in automotive, industrial, and consumer applications. Kynix Part #:KY32-AD1938YSTZ Manufacturer Part #:AD1938YSTZ Product Category:Interface - CODECs Manufacturer:Analog Devices Description:Serial 2016/4/8 0:00:00 -40°C ~ 105°C 24 b AD1938 48-LQFP (7x7) General Purpose 3 V ~ 3.6 V Package:48-LQFP Quantity:1249 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

General Purpose Amplifier 4 Circuit Rail-to-Rail 14-TSSOP Digi-Key Op Amp Quad GP R-R O/P 6V Automotive 14-Pin TSSOP Tube Arrow Operational Amplifiers - Op Amps Quad 25 uA 2.5V Kynix Part #:KY32-TPS544B25RVFT Manufacturer Part #:TPS544B25RVFT Product Category:DC Switching Regulators Manufacturer:Microchip Technology Package:SOP8 Quantity:3157 PCS Lead Time:3(168 Hours)

The CY7C63743C-SXC is a USB microcontroller based on the enCoRe™ series from Cypress. It features two USB ports, a watchdog timer, 24 I/O, four timer/three counter, and an operating supply current of 20 mA. It has an operating temperature range of 0°C to 70°C and a unit weight of 0.038731 oz. It is designed for SMD/SMT mounting. Features: • Two USB ports • Watchdog timer • 24 I/O • Four timer/three counter • Operating supply current of 20 mA • Operating temperature range of 0°C to 70°C • Unit weight of 0.038731 oz • SMD/SMT mounting Applications: The CY7C63743C-SXC is suitable for a variety of applications, including USB-based consumer electronics, industrial control, and medical devices. It can be used to control and monitor a variety of devices, such as motors, sensors, and actuators. It is also suitable for use in embedded systems, such as those used in automotive, aerospace, and military applications. Kynix Part #:KY32-CY7C63743C-SXC Manufacturer Part #:CY7C63743C-SXC Product Category:Application Specific Microcontrollers Manufacturer:Cypress Semiconductor Description:MCU PS/2, USB Surface Mount 0°C ~ 70°C OTP (8 kB) 256 x 8 24-SOIC 3.5 V ~ 5.5 V Package:SOP24 Quantity:7998 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)