Termékek kávézó berendezési elemek (101)

The ThunderION IQ 2.0 is a high quality and most powerfull anti-static bar for the Industry. The static eliminator has a long reinforced extruded profile body that provides for easy and sturdy mounting. Due to the strength of the bar sizes up to more than 5 meter can be delivered. Mounting the anti-static bar could be realised with a few mounting screws. The bar has an integrated 24v power supply with a rugged industrial M8 connection. The very effective bar makes discharging of high static charges distance more than 1 meter possible, even in high-speed production applications up to 1000m/s. The bar is complete shockless so touching the Tungsten(Wolfram) pins is completely safe. The bar functions completely stand-alone and can for future demands be connected to external sensors and monitoring systems to create a full close loop feedback system. Function control of the bar is done by means of high-power LED to make check-up of the functionality of the bar an easy job.

Aftermarket replacement bucket-tilt cylinder for Bobcat® skid steer & compact track loader. 2-3/4” bore x 13-1/8”stroke and 1-3/8” diameter rod. Induction hardened chrome rod & rugged ductile iron gland. Fits Bobcat® model numbers 773, S150, S160, S175, S185, S205, T180, T190.

The high voltage at both emitter points is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blowoff force is high at a relatively low air consumption. Features - Working distance: 250 mm max. - Air consumption: 3,5 Nm3/h using 1 bar - Max. pressure: 7 bar - Shockless touchable emitters - Being installed outside the air flow, the emitter pins are hardly subject to fouling, if at all - Can be fitted on a standard air header - Click system for easy assembly

Omdat het is ontworpen op basis van nieuwe principes en niet alleen maar is overgenomen van een PCB-relais, is de G2RV-serie van Omron het enige echte smalle industriële relais op de markt. Het gevolg hiervan is dat de G2RV een groot aantal voordelen biedt voor machinefabrikanten en paneelbouwers. Het relais is slechts 6 mm breed en is ideaal voor compacte panelen en apparatuur en toch biedt het de duurzaamheid en betrouwbaarheid die voor industriële toepassingen vereist is.

Meer dan 20 jaar geschiedenis op het gebied van Power Monitoring Technology. Compact en mogelijkheden voor meerdere circuits (tot 4 circuits aangesloten op één unit). Los problemen bij het ontwerp, de installatie, de bedrading en de inbedrijfstelling op met slechts één model. IEC 62053-22 nauwkeurigheidsklasse 0.5S, Push-In Plus-technologie voor gemakkelijke bedrading, automatisch LED- en akoestisch alarm bij foutieve bedrading, grote, gemakkelijk af te lezen witte LCD-display, DIN-railmontage en bidirectionele vermogensmeting.

The MultiPowerMaster or MPM is part of the high voltage power unit range. It features a broad range of input voltages, from 100240-V AC/5,060 Hz as well as electronically stabilized output voltage. The output voltage is factory preset to 7, 5, 4, and 3.3 kV. Red and green LEDs are incorporated in the top face of the unit. There is an option for the MPM to be fitted with an I/O connector for interfacing with a PLC, the F.E. Optional I/O signals are available for overload, high voltage present, and remote on and off. A 24-V power source is featured with the I/O connector, which enables use with the Typhoon air pressure sensor.

The HDR charging bar suits high velocity applications. Each individual point being fitted with a resistor, so the chance of spark-over is strongly reduced. features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suits high velocity applications - Chance of spark-over is strongly reduced

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and thePinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 5 - Dimensions: Length 166 x Ø 20 mm

CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).

The Cobra ionizing air gun is excellently suited for heavy-duty industrial applications. It has a lightweight durable gun body made of highimpact plastic. The airflow is controlled by the trigger. The air flow is amplified by a minimum factor of 6 : 1 by drawing in ambient air through the rear. The high-voltage point integrated aerodynamically in the gun body cleans itself during use. The gun comes standard with 6 metres of cable. Two guns at most can be connected to a single power unit. - Working distance: 600 mm max. - It comes standard with 6 metres cable, 12 metre is also possible - Ideal for heavy-duty industrial applications - The emitter pin is cleaned during use

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Features Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning Direct-drive motors require little or no maintenance Anodised finish for corrosion protection Connection for pressure sensor New design extruded aluminium profile Cost efficient versus compressed air