Émetteurrécepteur RS232 de faible puissance 5V 250Kbps (Caractéristiques 28 broches, avec réveil, oscillation de tension de sortie ±9V)The ZT230E series devices are +5V powered EIA/TIA232 and V.28/V.24 communication interfaces with low power requirements. These transceivers consist of combinations up to five line drivers, five line receivers and the proprietary switchcapacitor regulated voltage converters. The ZT211E and ZT213E/AE feature a low power shutdown mode which draws as little current as 1µA typical with receiver outputs tristated and in wakeup. These devices operate from a single +5V power supply at the guaranteed data rate of 250K bits/sec with enhanced electrostatic discharge (ESD) protection in all RS232 I/O pins exceeding ±15kV HBM Meets EIA/TIA232F and CCITT V.28/V.24
310 quality is designed to withstand high temperature service. Despite this feature, material softness and weldability are quite good. It can operate continuously at 1150 degrees and does not rust. It can operate intermittently at 1040 degrees. Like other austenitic grades, it has excellent toughness.
The 310S quality is resistant to high temperatures both in moist and dry environments. The low carbon content of the 310S allows it to withstand temperatures less than 310 does.
Microcontrôleur à puce unique avec TCP/IP et 10/100M Fast Ethernet MAC/PHY (Caractéristiques 128K Flash, 16GPIOs, LQFP80)
The AX11001, Single Chip Microcontroller with TCP/IP and 10/100M Fast Ethernet MAC/PHY, is a SystemonChip (SoC) solution which offers a high performance embedded micro controller and rich communication peripherals for wide varieties of application which need access to the LAN or Internet. With builtin network protocol stack, the AX11001 provides very cost effective networking solution to enable simple, easy and low cost Internet connection capability for many applications such as consumer electronics, networked home appliances, industrial equipments, security systems
420 quality stainless steel can be hardened by many heat treatments like high carbon steel. It contains at least 12% chromium (Cr) and this alloy is sufficient for corrosion resistance. It has good softness in annealed condition, but it has the ability to get 50 Rockwell hardness by heat treatment. For best corrosion resistance it must be hardened and gets it surface cleaned or polished.
The AX88178 USB to 10/100/1000 Gigabit Ethernet/HomePNA/HomePlug controller is a high performance and highly integrated ASIC with embedded 40KB SRAM for packet buffering. It enables low cost and affordable Gigabit Ethernet network connection to desktop, notebook PC, and embedded system using popular USB ports. It has an USB interface to communicate with USB host controller and is compliant with USB specification V1.0, V1.1 and V2.0. It implements 10/100/1000Mbps Ethernet LAN function based on IEEE802.3, IEEE802.3u, IEEE802.3ab standards or HomePNA standard. It supports mediaindependent interface (MII) to simplify the design on implementing Fast Ethernet and HomePNA functions. It also provides gigabit mediaindependent (GMII) and reduced gigabit mediaindependent (RGMII) interface for interfacing with Gigabit Ethernet PHY. Single chip USB to 10/100/1000 Gigabit Ethernet and HomePNA and HomePlug Network Controller
304 quality is the most commonly, and in a versatile way, used stainless steel in the world. It has ability to be perfectly shaped and welding capability. Austenitic structure of 304 provides to perform deep drawing without intermediate annealing, and therefore, it is preferred in manufacturing which requires deep drawing such as sink, natural gas chimneys and saucepan. It can be used for various purposes in sectors such as industry, architecture, transportation.
The AX88796C is a SPI or nonPCI Ethernet controller with low power, lowpincount and variable voltage I/O for the Embedded and Industrial Ethernet applications. The AX88796C supports 8/16bit SRAMlike or AddressData Multiplex interface with variable voltage I/O, providing a glueless connection to common or highend MCUs. The AX88796C also provides an alternative SPI slave interface for MCUs with SPI master for simplifying host interface connection. The AX88796C integrates onchip Fast Ethernet MAC and PHY, which is IEEE 802.3/802.3u 10BASET/100BASETX compatible, and embedded SRAM for packet buffering to accommodate high bandwidth applications.