Termékek munka (129)

A non-film chemical/mechanical nano-technological hardener with a base of lithium silicates for cortical consolidation, chemical surface hardening and anti-dust treatment of recently-constructed industrial concrete flooring. QL Nano Lithium must be applied on the surface of the floor, immediately after finishing with mechanical bladed trowels. Once the product has been absorbed, it is possible to polish the treated surface using specific polishing machines. It is the most significant progress in the saturation and the reinforcement of concrete floorings in the last 50 years, it has always been used in the United States. The "nanotechnology" of QL Nano Lithium, which is a real improvement with respect to sodium silicate and extremely performant as a reinforcing agent for concrete, has allowed us to achieve levels of performance that were previously unimaginable. The product also presents the following characteristics: -It significantly limits (90%) the cracks of the flooring during hardening. - This is the only chemical hardener that helps to alleviate and prevent the alkali-silica reaction ( "alkali-aggregate reaction" or ASR). - It completely replaces the armour with quartz dusting. It does not crack, it does not detach, it creates a film, it does not bubble. - The extraordinary contribution to the deep reinforcement, makes the surface of the concrete completely dust-proof and highly resistant to abrasion. The continuous use of the flooring contributes to continuously improving the surface gloss without altering slipperiness in the least. - It is in an aqueous solution and does not contain solvents. It is odourless, non-flammable, non-toxic, it does not fear the freezing and thawing cycles, it is not carcinogenic and does not contain volatile substances (VOC Free) and can also be used in closed premises. - Compatible with other materials like: epoxy resins, polyurethane resins, acrylic resins, etc.. - It is UV resistant and remains stable over time. Anti-dust hardening treatment, for industrial flooring and concrete slabs, both old and new, both grey and coloured. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". In case of new flooring, it can be applied as soon as the surface of the industrial flooring is walkable, without superficial water residue. Shake the product before use. Apply the product by low pressure airless, evenly without creating puddles, completely saturating the surface for a consumption of 70 g/m² approximately. It is advisable, after about 7-10 days, to wash the surface floor polisher provided with a black pad to eliminate any excess product, thus obtaining an elegant semi gloss (opaque) effect of the flooring, by polishing the lithium crystals on the surface. Approximately 0,07 litres of QL Nano Lithium for every square metre of surface to be treated.

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless. Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest. The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended. The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with Consilex Idrofix for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment. From 0,20 to 1,00 kg of Consilex Idrofix per square meter of surface to be treated, based on the porosity of the support.

Powder preparation, ready-to-use, based on hydraulic lime, for the preparation, with the sole addition of water, of grout for masonry reinforcement, injectable and castable, high performance in terms of sliding, strength and stability, for ecological building interventions and the restoration of vintage buildings and monuments. In the Sanafluens mixtures, the water is completely and stably incorporated from the hydration reaction of lime; conversely, in traditional mixtures, a very high part of added water, is free, and evapourating, it leaves gaps in the walls. Sanafluens is based on natural hydraulic lime, sodium gluconate, kaolin, aluminates; it does not contain cement, resins, solvents and radioemissive aggregates. Consolidation through injections of brick, stone or mixed masonry, "bag" structures, masonry damaged by the earthquake. Consolidation of masonry affected by capillary rising damp and soluble salts. Consolidation of plasters detached from the masonry support, even with frescoes or of historical and artistic value. Consolidation of foundation structures, pillars, vaults and arches. Clean the application surfaces by spraying abundantly with water. If there is a lack of plaster, apply a suitable render of hydraulic lime and sand (such as Untersana) to close as much as possible the escape routes of the grout once it has been injected. Trace, from bottom to top and from left to right, a 50 cm square grid. On the intersection of the squares, drill the masonry with a rotary drill, with a bit of suitable diameter (depending on the type of masonry to be injected; diameter usually between 12 and 24 mm), to a depth of at least 3/5 of its thickness, tilting the drill downwards by about 10 - 20°. Once all the holes have been drilled, they will be sucked up, blown with compressed air and sprayed with water, to remove the dust inside them produced by the drilling. Insert in the holes for a depth of about 5 cm, transparent meshed rubber tubes, with a total length of at least 30 cm (therefore with about 25 cm external). Properly seal the perimeter of the pipe with Anchorsana Fix accelerated setting grouting mortar to prevent the injected product from escaping. Inject the grout always keeping it lightly mixed and operating a continuous flow, without interruptions. Pour about 2/3 of the mixing water into the mixer. Gradually add Sanafluens and the water still required, continue to mix until a fluid, homogeneous, lump-free grout of the desired consistency is obtained. The mixing water indicatively necessary is equal to 22-24% by weight (5.5 - 6 litres per bag). Reinforcing backfills and fills can be carried out both by gravity and using manual or automatic pumps, depending on the type of application. To verify the effectiveness of the reinforcement, the grout will come out of the pipes adjacent to that in which it is injected. Approximately 1500 kg of Sanafluens for each cubic metre of volume to be filled.

Claygrain Claygrain is a dissolved, anhydrous sodium bentonite powder, characterised by a montmorillonite content in excess of 95%, with low yield-point (proof). The product should be used as it is, to increase the amount of bentonite in punctual areas, or mixed with cement and water or just water to obtain a slightly expansive waterproofing mortar, suitable for smoothing any crawl spaces in the concrete prior to laying and refilling the Claytex bentonite sheet. Reinforcing and/or filling injections. Plastic diaphragms. Punctual protective sealing of critical areas in waterproofing underground areas with bentonite systems. The standard dosage is 60 l/m³ of water (standard minimum quantity). The indicated concentration can be adjusted, depending on the characteristics of the soil and the required viscosity. It is necessary to mix the product adequately during the preparation of the slurry to allow sufficient hydration. Product to buy as needed. Packaging: 25 kg bag UM: €/kg

Pantaloni da chef con elastico in vita, tasche davanti, tasca dietro. Personalizzabile con ricamo fino a 9 colori e stampe Quantità minima:No minimi Tempi di consegna:5/7 giorni Prezzo:A preventivo

It meets all the requirements of the modern ballistic helmet for the military. The helmet is lightweight due to the elimination of the ear cover, which allows for better hearing localization and compatibility with communication headsets. The helmets are designed to withstand very minor trauma, tested with shrapnel and pistol ammunition. The helmet is compatible with : - Gas masks - Goggles and ballistic masks -Hearing protection and communication systems. The helmet is capable of operating in the areas of environmental climatic zones described in the standard Stanag 4370/EATCP 230: Level II and IIIA according to NIJ 0106.01 modified as a minimum value by NIJ 0101.04 V50 ≥ 620 m/s according to NATO STANAG 2920 or MILSTD 662F. STRAP UNDER THROAT:A 4 Points “SYSTEM PAD” SUSPENSION:N° 9 PADS THICKNESS:19 MM

Ballistic visor to be applied on helmets. Splinter-proof use, removable in seconds. Ballistic resistance STANAG 2920 V.50 250 meters / Sec. weight:0,560 kg visor high:180 mm Material: POLYCARBONATE

Equipment consisting of a container structure and an armor system dissociated using high materials technology. Designed and built by Panisari Arms S.r.l. Approval performed at BANCO NAZIONALE DI PROVA of Gardone Val Trompia (Bs) Italy. Composed by: - N. 4 wheels, 2 fixed and 2 swiveling with block of safety - N. 2 steel bars of 10 mm for attachment to vehicles and handling - N. 1 lid for inspection. On the front side there are two nozzles, which allow you to insert any light weapon supplied to the police and the armed forces Weight: total 53,00 kg Colors: - standard green“NATO” RAL 6020 - blue RAL 5013 - blue RAL 5015 - or at the customer’s request weight :53,00 kg ballistic material:IN THE SHOOTING ROOM SNAP CLOSURE:security clock

Bulletproof Pants with the peculiarity of replacement of the ballistic elements that go in the soft state from the level STANAG 2920 with fragments from 450 meters per sec at level NIJSTD0101.04 IIIA 9 mm - 44mag 440 meters per sec until you get to insert in the removable bags with velcro, rigid panels level NIJSTD0101.04 III - 7.62 NATO. Colors and writings at the customer’s request. Accessories Braces and adjustable belt. Weight: 2 kg The weight may vary depending on the protection requested by the customer. weight :2,00 kg MODULABLE ELEMENTS:REPLACEABLE material:NOMEX 3 ANTIFIAMMA KERMELL KEVLAR KEVLAR XP TWARON GOLDFLEX

It meets all the requirements of the modern ballistic helmet for the military. The helmet is lightweight due to the elimination of the ear cover, which allows for better hearing localization and compatibility with communication headsets. The helmets are designed to withstand very minor trauma, tested with shrapnel and pistol ammunition. - Excellent ballistic protection against a wide range of fragments and projectiles. - Balance between penetration resistance and low dynamic deflection. - Good adhesion to resin Ballistic resistance insensitive to: - temperatures between -52° and +70° - immersion in seawater - Wide range of chemicals and cleaning agents Aramid is flame and heat resistant. It does not melt or drip, does not sustain flames and has low smoke toxicity The helmet is compatible with : - Gas masks - Goggles and ballistic masks -Hearing protection and communication systems. BUCKLE :PRESSUR STRAP UNDER THROAT:a 4 punti MATERIAL:100% aramid

FEATURES - High impact resistance polycarbonate shell with head ventilation system, - Internal polystyrene lining for maximum absorption bumps, - Padded internal lining in fireproof fabric, - 4 mm polycarbonate visor with locking up or down, - Shaped neck protection with inserts in polycarbonate and fireproof fabric covering, - Quick release retention system with chin guard removable. Sizes: One size Weight: - 1,350 grams Colors: - White, - Blue, - Light blue, - Green. INTERNAL COVERING :FIREPROOF FABRIC VISOR:POLYCARBONATE - 4MM shell:POLYCARBONATE

Gilet da lavoro aziendale smanicato ed imbottito, personalizzato con logo - Gilet da lavoro aziendale 80% poliestere, 20% cotone, smanicato ed imbottito per stagione autunno-inverno, personalizzato con logo tramite ricamo, stampa, patch. Ampia gamma di colori, taglie a scelta, imbottitura in polyestere. - Fodera in polyestere - Profili rifrangenti - Tasca sul petto con portabadge a scomparsa - Doppie tasche con patta e chiusura in velcro - Due tasche con zip e fodera rinforzata per utensili - Tasca interna portafoglio con velcro - Taschino interno portacellulare - Elastico antivento nel giromanica - Elastico stringifianchi - Bottoni automatici in metallo Minima quantita:no minimi (consigliati 10pz) Taglie :XS S M L XL XXL XXXL prezzi:a preventivo

INSPIRED BY NECESSITY The idea originates from the actual needs and requests of the Special Forces Units for lightweight and high energy foodpacks. AUTHORITATIVE Created and tested among people who work and operate in their everyday life under hard conditions in the most challenging regions all over the world. HIGH STANDARD Our products are carefully designed in every detail from taste to package. We are guided by the Special Forces principle, Dont f… with the food! SPECIAL TECHNOLOGY The meals are based on a freeze-dried technology that will preserve the flavor, consistency and nutrients of the product after rehydration. We guarantee a 8-year shelf-life for the product. EASY TO PREPARE The meals will be ready in less than 10 minutes. Just add hotwater and let it rest. Comfortable to enjoy your dish right from the pouch. NB! Product will work also with cold water, just double the time. BREAKFAST:A terrific breakfast is the foundation of a good day! SOUPS:Nothings beats the cold weather like a warming soup! MAIN MEALS:Whit meat! Without meat! Gluten- free! Lactose-free! Vegan! Somethings for everyone!

In the back there are three handles, one located in the median part of the device, formed by two cordura straps, covered by a plastic tube, into which the weak forearm is inserted, with the hand that grasps the more peripheral handle. In the upper part, there is a horizontal handle, which will be gripped by the strong hand. At the bottom and at the top of the device are present a layer of high-density foam rubber for prevent the lexan sheets from hitting the operator or the subject being treated, causing unnecessary damage. The absorbent pack is formed by a series of layers of foam rubber, interspersed with a series of layers of lexan in order to slow down the penetration of a blade and retain it inside, so as not to allow easy reuse of the sharp object. The waterproof and washable cordura or nylon lining is equipped with a zipper in the lower edge that allows you to remove the absorbent pack stratified, for the cleaning of the same or the maintenance of the package. Rear:3 handle Upper part:horizontal handle Thickness:150 mm

The riot helmet used by: - the Police, - Law enforcement. - High impact resistance polycarbonate shell with head ventilation system, - Internal polystyrene lining for maximum absorption bumps, - Padded internal lining in fireproof fabric, - 4 mm polycarbonate visor with locking up or down, - Shaped neck protection with inserts in polycarbonate and fireproof fabric covering, - Quick release retention system with chin guard removable. Sizes: One size Weight: - 1,350 grams Weight :1,350 grams Sizes:One size Visor :Polycarbonate Shell:Polycarbonate Interna Covering :Fireproof fabric

The BK-3 ballistic helmet meets all the requirements of the modern ballistic helmet for the land army and can be identified with the USA PASGT and MITCH models. Geometric belongs to the category of European type FRITZ helmets. Helmet without bolts that does not use screws to connect the internal equipment with the shell, compared to the patented “click” system. The advantages of this helmet are as follows: - there are no potential weaknesses ballistics on a helmet shell; - increased protection surface; - there is no possibility of fragmentation secondary; - the mass of the helmet remains unchanged; - the comfort of use increases by lowering the helmet center of gravity; - the force on the soldier’s chin has decreased; - the net absorbs ballistic energy The SHOTECK internal equipment adjusts to a helmet with three points that allowed for quick and easy assembly. ABSORPTION:impact energy NET FABRIC:PE-PA PROTECTION AREA:INCREASED BY 14%

- Removable lower front panel with velcro and clips for quick set-up changes based on the role and weapon adopted. - Front ID Velcro. - Reinforced transport/retrieval handle on the back. - The presence of an internal plate retention band makes it perfectly adaptable to the sizes of the S.A.P.I. cutting plates. Padded shoulder straps for greater comfort with two right + left velcro rings for attaching radio cables/antennas or hydration tube. Mesh lined interior for better breathability. Adjustable shoulder straps and hips. - One size. EXTERNAL MATERIAL:nylon 1000D VELCRO ID:front M.O.L.L.E. system:lasercut

The helmets are designed to take very small trauma, tested with fragments and with hand weapon ammunition. Excellence in the field of absorption of projectile impact energy, and on field comfort, helmet ven- tilation, perfect connection between the helmet and the user’s head. - Excellent resistance against a range in size of fragments and bullets; - balance between resistance to penetration; - low dynamic deflection; - poor adhesion to the resin; - good dimensional stability. Ballistic resistance insensitive to: - Temperatures -52 - 70 ° C, - Soaking in sea water, - Wide range of chemicals e detergents. NECK PADDING:INTERCHANGEABLE “SYSTEM PAD” SUSPENSION:7 PADS STRAP UNDER THROAT:3 POINTS BUCKLE:BY PRESSURE

Camice da medico/infermiere - DONNA, colore bianco, collo a revers, abbottonatura con bottoni e occhielli, maniche lunghe, taschino sul davanti sinistro, tasche davanti e martingala posteriore. Personalizzabile con stampa termo applicata o ricamo fino a 9 colori. Quantità minima:No minimi Tempi di consegna:5/7 giorni Prezzo:A preventivo

Casacca donna da estetista per centri estetici, beauty & wellness con scollo a "V", chiusura con laccio in vita, tasca sul davanti destro e pinces davanti e dietro. Personalizzabile con ricamo fino a 9 colori, stampe, strass e borchiette. Quantità minima:No minimi Tempi di consegna:5/7 giorni Prezzo:A preventivo

NOME: WIP AIRPRO CODICE ARTICOLO: WIP AIRPRO DESCRIZIONE: Facciale filtrante FFP2 NR prodotto interamente con materiali di provenienza certificata Italia con identificazione di filiera. La mascherina è prodotta in Italia ed è certificata sia come Dpi che come Dispositivo Medico in quanto ha la capacità di filtrazione di una FFP2 (>94%) e una resistenza alla respirazione come una mascherina chirurgica Tipo IIR. Gli elastici offrono un comfort molto elevato anche dopo molte ore. La sua forma particolare elimina l’appannamento degli occhiali durante l’utilizzo. Le mascherine sono imbustate singolarmente attraverso un processo automatizzato per ridurre il rischio di contaminazione; questo viene ulteriormente ridotto attraverso un ciclo di sanificazione mediante raggi UV-C ad alta potenza. Dispositivo di Protezione Individuale III° categoria Regolamento (UE) 2016/425 Norma di riferimento: ISO EN149:2001+A1:2009 Certificazione DPI

MODELLO WIN VIS CLASSIFICAZIONE DPI II categoria STANDARD EN 166:2001 COLORE TRASPARENTE MATERIALE PETG polietilene, poliuretano e v elcro PRODUTTORE W.I.P. S.r.l. V ial e Parioli 12 Roma CERTIFICATO CE AC 20156 Certottica Scrl del 05/06/2020 CONFEZIONE 5 PCS MODALITA’ D’USO Lo schermo facciale deve essere indossato con la fascia girotesta in posizione orizzontale come da foto.

Casacca donna per centri estetici, beauty & wellness in tessuto elasticizzato per massimo comfort chiusura diagonale con zip nascosta, taschino sul davanti destro, tasca sul davanti sinistro e cintura dietro. Personalizzabile con ricamo fino a 9 colori, borchiette, strass e stampe Quantità minima:No minimi Tempi di consegna:5/7 giorni Prezzo:A preventivo

MODELLO WIN VIS CLASSIFICAZIONE DPI II categoria STANDARD EN 166:2001 COLORE TRASPARENTE MATERIALE PETG polietilene, poliuretano e v elcro PRODUTTORE W.I.P. S.r.l. V ial e Parioli 12 Roma CERTIFICATO CE AC 20156 Certottica Scrl del 05/06/2020 CONFEZIONE 5 PCS MODALITA’ D’USO Lo schermo facciale deve essere indossato con la fascia girotesta in posizione orizzontale come da foto

NOME: WIP AIRPRO CODICE ARTICOLO: WIP AIRPRO DESCRIZIONE: Facciale filtrante FFP2 NR prodotto interamente con materiali di provenienza certificata Italia con identificazione di filiera. La mascherina è prodotta in Italia ed è certificata sia come Dpi che come Dispositivo Medico in quanto ha la capacità di filtrazione di una FFP2 (>94%) e una resistenza alla respirazione come una mascherina chirurgica Tipo IIR. Gli elastici offrono un comfort molto elevato anche dopo molte ore. La sua forma particolare elimina l’appannamento degli occhiali durante l’utilizzo. Le mascherine sono imbustate singolarmente attraverso un processo automatizzato per ridurre il rischio di contaminazione; questo viene ulteriormente ridotto attraverso un ciclo di sanificazione mediante raggi UV-C ad alta potenza. Dispositivo di Protezione Individuale III° categoria Regolamento (UE) 2016/425 Norma di riferimento: ISO EN149:2001+A1:2009 Certificazione DPI ISO EN14683:2019 Certificazione

Casacca uomo per centri massaggi, beauty & wellness in tessuto modal fresco, elasticizzato e confortevole con apertura a zip rovesciata, collo a "V", tasche davanti, taschino su davanti sinistro e tagli sagomati. Personalizzabile con ricamo fino a 9 colori o stampa. Quantità minima:No minimi Tempi di consegna:5/7 giorni Prezzo:A preventivo

Pantaloni da chef con elastico e coulisse, tasche interne davanti e tasca dietro. Personalizzabile con ricamo fino a 9 colori o stampe. Quantità minima:No minimi Tempi di consegna:5/7 giorni Prezzo:A preventivo

Polo piquet per aziende, personalizzate con logo tramite tecnica di ricamo o stampa, o applicazioni di strass swarovski o borchie. Polo che diventano la perfetta divisa aziendale, con logo su misura. Ampia gamma di modelli e colori disponibili, taglie a scelta. Contattaci per un preventtivo gratutio. Quantita':no minimi Taglie:XS S M L XL XXL XXXL Personalizzazione:Ricamo, stampa, patch cucito

Casacca donna per centri estetici, beauty & wellness con tasche davanti, tagli sagomati e abbottonatura nascosta con bottoni a pressione. Personalizzabile con ricamo fino a 9 colori, stampe strass e cristalli Quantità minima:No minimi Tempi di consegna:5/7 giorni Prezzo:A preventivo

Camice bianco con tessuto di qualita' 100% cotone, personalizzabile logo azienda - Camice da lavoro per uomo, 100% cotone ideale per lavoratori di aziende, chiusura con bottoni coperti, collo aperto, schiena intera, 2 tasche e 1 taschino applicati, senza martingala. Personalizzabile con scritto o logo aziendale, stampa termo applicata o ricamo fino a 9 colori. Minima quantita:da 1 pezzo Taglie :XS S M L XL XXL XXXL prezzi:a preventivo