Termékek olapl (6)

Isoparaffinic oil VHVI-4/6/8 - belongs to the base oils of group III and is used for the production of high-quality motor oils. VHVI-4/6/8 base oil is produced by hydrotreating of the hydrocracking residue at high pressure and has a high viscosity index, good low temperature properties, ultra-low sulfur content, low aromatic hydrocarbons content and low volatility. Low pour point provides high pumpability of oil, easy engine start at subzero temperatures, which allows them to be used in various climatic conditions Thermo-oxidative stability reduces oil oxidation at high engine temperatures, reduces the formation of deposits Low volatility reduces the frequency of oil refills. Long run of oil in severe operating conditions (longer service life by 1.5-2 times compared to mineral oils). Compatible with mineral oils and esters.

Base oil SN-400 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-400 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-400 Can be used as base components in the manufacture of lubricating oils It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

Base oil SN-80 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-80 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-80 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

BS "Bright Stock" / KS-19p oil is a high-viscosity cylinder oil, that refers to high-viscosity base oils obtained by distillation under atmospheric pressure and vacuum distillation, extraction and dewaxing of solvents from residual oils – as well as at the end of hydrotreating. The name "Bright Stock" comes from a method of producing a high viscosity cylinder oil of a bright color (Bright) by mixing naphtha with a dark colored cylinder oil, the mixture is left until winter, the wax ingredients are extracted from it, and then the naphtha liquid is distilled. BS "Bright Stock" oil is contained in gear oils, marine diesel engine oils, cylinder oils and other oils with a high viscosity index.

Base oil SN-150 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-150 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-150 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.

La polvere di rame a marchio PMU viene prodotta mediante fusione. La polvere di rame ultrafine è una materia prima prodotta utilizzando i più recenti processi e attrezzature tecnologici. È costituito da rame privo di ossigeno, che ha una composizione isotopica stabile di una struttura naturale e non stratificata. La polvere di rame PMU è atossica e non radioattiva, non contiene metalli preziosi. La polvere è confezionata in bottiglie di PET da 2000 go in boccette di vetro. Il grado di purezza è del 99,999%. La massa media delle particelle non è superiore a 7 micron. Le particelle di polvere di rame sono sferiche. Polvere chimicamente pura con un contenuto di ossigeno dello 0,06%. Ha una radioattività specifica - in base al contenuto di isotopi nella polvere ultrafine di rame PMU - 65-30.9 CU, 63-69.09 CU