Termékek olapl (75)

Fond bombé GRC en acier carbone ou en acier inoxydable LG Tec Les fonds bombés avec un Grand Rayon de Carre (GRC) sont une solution polyvalente pour la construction de cuves dans diverses applications industrielles. Stock permanent :Ø 150mm à Ø 4000mm, épaisseur 1,5mm à 100mm En Acier Carbone ou en Acier inoxydable, Conformité aux Normes de Qualité : NFE 81102 et DIN 28011, garantissant ainsi une performance optimale et une sécurité fiable. La compatibilité CODAP est également possible.

Revêtement temporaire à base d'eau Cortec VpCI® 391. Protégez vos pièces et équipements métalliques de la corrosion avec Cortec VpCI® 391. Ce revêtement innovant à base d'eau offre une protection exceptionnelle contre la rouille, le ternissement et d'autres formes de corrosion. Utilisation de l'Inh de corrosion breveté en phase vapeur de CortecLa technologie ibitor (VpCI®), elle crée une barrière transparente et protectrice qui protège les surfaces métalliques pendant le stockage et le transit. Facile à appliquer par pulvérisation, brossage ou trempage, le VpCI® 391 sèche rapidement pour une finition non collante, ce qui permet une manipulation immédiate. Respectueux de l'environnement et exempt de produits chimiques dangereux, ce revêtement polyvalent protège une large gamme de métaux, y compris l'acier, l'aluminium et le cuivre. Idéal pour les machines, les outils, les composants automobiles et plus encore, VpCI® 391 offre jusqu'à 2 ans d'indoOu et 6 mois de protection extérieure. Il suffit de le retirer avec de l'eau lorsqu'il est prêt à l'emploi.

Base de maquillaje superventas n1 especialmente diseñada para pieles sensibles y alérgicas. La fórmula, que contiene ingredientes hipoalergénicos, garantiza su máxima seguridad. Además, tiene una cobertura completamente natural, no se asienta en los poros y las arrugas. La base de maquillaje Delfy Foundation es una base de maquillaje con doble cobertura, es de larga duración y además es resistente al agua. Es muy fácil de aplicar y cubre y suaviza todas las imperfecciones de la piel de una manera muy natural. Modo de empleo: preparar previamente la piel. Para obtener resultados ideales, se recomienda utilizar Delfy Super Primer, que hidrata profundamente la piel. Aplica una fina capa de base con una brocha de maquillaje (por ejemplo, N5, N6 o N12) o una esponja. Si es necesario, agregue a las zonas deseadas. Referencia:5060465711106

Tables and chairs are essential components for creating inviting and functional spaces in various settings, including open-air bars, restaurants, shopping centers, and sponsored events. Made from materials such as metal, plastics, and wood, these pieces can be customized with logos to reinforce brand identity and create a cohesive look. The versatility of tables and chairs allows businesses to create comfortable and stylish seating arrangements that enhance the customer experience. Whether used for dining, socializing, or promotional events, these pieces are designed to withstand the demands of high-traffic environments while maintaining their aesthetic appeal. By investing in quality tables and chairs, businesses can create memorable spaces that attract and retain customers.

Gli integratori alimentari funzionali sotto forma di gommosi offrono un modo unico e piacevole per supportare i tuoi obiettivi di salute e benessere. Disponibili in blister e barattoli, queste gommosi sono infuse con nutrienti essenziali e ingredienti attivi, fornendo un'opzione comoda e discreta per l'integrazione on-the-go. Sono perfette per le persone che preferiscono un approccio più interattivo e saporito al loro regime di salute. Che tu stia cercando di rinfrescare l'alito mentre aumenti la tua energia o supporti la funzione cognitiva, queste gommosi funzionali offrono benefici ad ogni masticata. Il design innovativo degli integratori alimentari funzionali in forma di gommosi li rende una scelta attraente per coloro che cercano un nuovo modo per migliorare l'assunzione nutrizionale. Sono facili da trasportare e consumare, rendendoli ideali per le persone impegnate che necessitano di una soluzione rapida ed efficace. Con un focus sulla qualità e sul gusto, queste gommosi sono realizzate per fornire il massimo beneficio garantendo un'esperienza piacevole. Scegliendo integratori gommosi funzionali, stai abbracciando un approccio moderno ed efficace per mantenere la tua salute e il tuo benessere.

Spécialiste en emballages et conditionnements métalliques, notre entreprise propose une vaste gamme de produits, des boîtes sérigraphiées aux capsules en plastique pour emballage. Nous excellons dans la production de boîtes métalliques lithographiées et décorées, adaptées aux exigences des secteurs alimentaire et cosmétique. En tant que fabricant d’emballages métalliques, nous offrons des solutions sur mesure, y compris des bidons fer blanc alimentaires, boites standards ou personnalisées, ainsi que des couvercles et fonds pour boites composites. Nos installations sont équipées pour répondre aux besoins spécifiques de l'industrie, avec une gamme incluant des emballages métalliques industriels et alimentaires, ainsi que des accessoires estampés et embossés. Nous assurons la conformité de nos emballages homologués pour les matières dangereuses et offrons des boîtes cylindriques, des boîtes de conserve métalliques pour huile d'olive, et des bidons en métal. Hauteur:mm.64 ----> mm.211 Volume:200mL ----> 750mL Palette:800 x 1200 1120 x 1420

Le savon liquide « Base neutre » nettoie et purifie tous les types de peaux, mêmes les plus délicates. Formulé sans Huiles essentielles, il ne tient qu’à vous de créer votre propre fragrance si le cœur vous en dit. « Base neutre » est une invitation à la poésie

Syntech Pavidamp A three-component formulation, with a fluid epoxy resin base in aqueous emulsion (A + B) to be mixed with the third component (C) consisting of white cement and micro-quartz, specially designed to be used as a primer for cementitious surfaces in the presence of humidity and in conditions of hydraulic counter-thrust. Generally referred to as “wet-bonding”, it is particularly suitable as an anti-humidity barrier for the subsequent laying of parquet. Building connection layers and smoothing cement surfaces; bottom layers for resinous coatings of floorings in the presence of damp subbases; anti-humidity barriers in concrete, brick and stone masonry; surfacings of porosity, cracks and superficial irregularities. As protection from rising damp for bases where operations with polyurea resins SYNTECH POLYUREA will be carried out. The support on which the resin system is to be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilatations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. Apply by roller, brush or spray from 150 to 200 g / m2 of Syntech Primer EP-W to consolidate the substrate and facilitate the adhesion of the subsequent coating. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. Prepare the mixture of the 2 liquid components (A+B), pouring the contents of the component B in the container of the component A. Mix with drill for about 2 minutes. Add the pre-dosed hydraulic binder (high resistance white cement) to the mixture A+B, and mix with a mixer drill. To disperse the product optimally, pour the powders (component C) a little at a time, continuing to stir with drill, until a homogeneous lump-free mixture is obtained. If it is used as a base: dilute with 10-15% by weight of clean, soft water and apply with a roller or brush. Indicative consumption: 0.4-0.5 kg/m² on regular supports, 0.7-0.9 kg/m² on irregular supports. If it is used for fine finishing coats: load the system A+B+C diluted with 10-15% of fresh clean water, with 60-70% spheroidal quartz (0.04-0.25 mm). Apply with steel trowel or plastering trowel. Indicative consumption: 1-2 kg/m². If it is used for medium finishing coats: load the system A+B+C diluted with 10-15% of fresh clean water, with 70-80% spheroidal quartz (0.1-0.5 mm). Apply with steel trowel or plastering trowel. Indicative consumption: 3-4 kg/m². From 0.50 to 0.60 kg of SYNTYECH PAVIDAMP for each square metre of surface to be covered. Pail 3.8 kg [A] - Pail 1.2 kg [B] - Pail 5 kg [C] - Kit: 1 Pail 3.8 kg [A] + 1 Pail 1.2 kg [B] + 1 Pail 5 kg [C]

nino 1 is a basic modular furniture module for children that combines functionality, durability and aesthetic design. Made of safe, high-quality materials, the module is ideal for arranging children's space, providing comfort and versatility in use. nino 1 can serve as a seat, table, storage unit or part of a larger furniture structure, making it extremely versatile. Its simple form and sturdy construction make it easy to combine with other modules from the nino series, creating individual layouts to suit the child's needs and available space. Nino modular furniture grows with the child, adapting to changing needs and ensuring long-lasting use. It is an excellent choice for modern interiors, encouraging creative arrangements.

Nuevo cargador inalámbrico 3 en 1 de 15 W, base de carga rápida Material:ABS Aporte:5V 3A / 9V 2A Producción:15 W/10 W/7,5 W/5 W cargando:Teléfono / auriculares / reloj Tamaño:100*74*104mm

WATER BASED COATING PAPER CUP PLASTIC FREE100% BIODEGRADABLE CUSTOMIZABLE - These eco-friendly cups, do not contain any plastic, have a water-based coating. Plastıc free. Eco-friendly cups. 100% biodegradable. Available in all sizes.

Découvrez notre complément alimentaire à base de quercétine associée à de l'acérola, des vitamines et de la bromélaïne. Il est formulé spécifiquement pour contribuer à les allergies et les sensibilités ORL. Formule clé en main disponible en marque blanche.

Hand Make Thanos Resin Figures Kit Model With A Base Number：:GRCS1001 Material：:Resin/Polystone Type：:Collectible

CaCO3 95-97%, Ca 39%, Natrium 146mg/kg, Phosphor 0,22g/kg, Feuchte 0,2%

Basette con astina di diverse altezze per tutti i tipi di gagliardetti. Fornite in ottone, legno e marmo con diversi materiali. Visita www.aremitaliashop.com e scegli quella ideale per te tra i tanti articoli Quantità minima:1 pz Dimensioni:qualsiasi (scegli il tuo modello)

El Grupo PR-100 Sanitaria con motoreductor y bancada de acero inoxidable está diseñado para aplicaciones sanitarias que requieren un alto nivel de higiene y seguridad. Este equipo de bombeo es ideal para la industria alimentaria, farmacéutica y de bebidas, ya que garantiza un manejo seguro y eficiente de líquidos sensibles. El motoreductor proporciona una transmisión de potencia estable y controlada, optimizando el rendimiento del sistema. La bancada de acero inoxidable asegura una estructura resistente a la corrosión, fácil de limpiar y mantener, cumpliendo con los estándares sanitarios más estrictos. El Grupo PR-100 es compatible con líquidos viscosos, productos alimentarios y líquidos químicos no agresivos, proporcionando una operación continua y fiable en entornos exigentes. Su diseño compacto y modular permite una fácil integración y limpieza, siendo la opción perfecta para procesos que requieren alta precisión y eficiencia.

CortecLe revêtement VpCI® 386 est une couche de finition acrylique de pointe à base d'eau conçue pour offrir une protection supérieure contre la corrosion pour divers substrats métalliques. Développé par des experts en prévention de la corrosion de Cortec Corporation, ce revêtement innovant exploite VpCI® technologie pour créer un bouclier invisible contre la rouille et l'oxydation. Respectueux de l'environnement et facile à appliquer, il offre une adhérence, une durabilité et une polyvalence exceptionnelles dans diverses industries. Idéal pour l'équipement industriel, la fabrication, l'automotiapplications vé, marines et de construction, le Cortec VpCI® 386 offre une protection fiable tout en respectant des normes environnementales strictes.

Chez LG Tec, nous proposons des fonds bombés spécialement conçus pour la fabrication de braséros. Ces pièces métalliques, issues de notre expertise en chaudronnerie, apportent solidité et élégance à vos créations. Nos fonds bombés s’adaptent parfaitement aux braséros en extérieur, grâce à des finitions précises et une résistance aux conditions extrêmes.

Spécialiste en emballages et conditionnements métalliques, notre entreprise propose une vaste gamme de produits, des boîtes sérigraphiées aux capsules en plastique destinées à nos emballages. Nos BAS sont adaptées à tous les secteurs, secteur industriel, (industrieaéronautique, secteur alimentaire. Elles permettent de conditionner un large éventail de produits allant des graisses aux semence, les poudres etc... Divers diamètres: 52, 65, 71,5 - 83/86 - 100 - 120, 166,5. Hauteurs variables. Fonds classiques ou EASY OPEN ou EASY PEEL Capes plastiques produites en interne. Palette:800 x 1200 ou 1120 x 1420

Gli integratori alimentari in forma di gocce offrono un metodo di assunzione rapido ed efficiente, ideale per chi ha difficoltà a deglutire le pillole. I componenti attivi contenuti nelle gocce vengono assorbiti più rapidamente dall'organismo, garantendo un'efficacia immediata. Questa forma farmaceutica permette un dosaggio personalizzabile, adattandosi alle esigenze specifiche di ogni individuo. Le gocce sono disponibili in flaconi di diverse dimensioni, realizzati in materiale PET o vetro, per garantire la massima qualità e sicurezza del prodotto. Con un tempo di consegna di 8 settimane, questi integratori sono perfetti per chi cerca soluzioni personalizzate e di alta qualità per il benessere quotidiano. La formulazione delle gocce include una vasta gamma di materie prime, come estratti vegetali fluidi, fermenti lattici, lattoferrina e colostro, che supportano il benessere generale. Gli aromi naturali e artificiali migliorano ulteriormente l'esperienza sensoriale, rendendo l'assunzione più gradevole. Questi integratori sono progettati per chi desidera migliorare la propria salute in modo semplice e conveniente, senza rinunciare alla qualità. Scegliendo le gocce, si opta per un prodotto innovativo e affidabile, capace di soddisfare le esigenze nutrizionali più diverse.

Gli integratori alimentari liquidi in spray offrono un metodo di somministrazione rapido ed efficace, ideale per chi cerca un assorbimento immediato dei nutrienti. Questa forma farmaceutica è progettata per garantire che i principi attivi raggiungano rapidamente l'organismo o l'area trattata, prolungando la loro azione nel tempo. Gli spray sono prodotti in flaconi di diverse dimensioni, tra 5 e 30 ml, in materiale PET o vetro, offrendo flessibilità nella scelta del packaging. La produzione richiede un tempo di consegna di otto settimane, garantendo una disponibilità costante per i rivenditori. Le materie prime utilizzate includono estratti vegetali fluidi, vitamine, fermenti lattici, lattoferrina e colostro, insieme a una varietà di aromi naturali e artificiali. Questo mix di ingredienti assicura che gli spray siano non solo efficaci, ma anche piacevoli da utilizzare. Gli integratori in forma di spray sono ideali per chi cerca un prodotto che offra un assorbimento rapido e un'azione prolungata dei nutrienti.

Sanaxil I Natural, protective, decorative, breathable, pigmented, non-toxic, anti-mold plaster, with stabilized potassium silicates, for interiors and exteriors. Substantially mineral formulation which, thanks to the natural alkaline pH of potassium silicate, develops a strong antibacterial and anti-mold action. Sanaxil I is a versatile and valid product in various application fields: in green building interventions, in new constructions and in the restoration of period and monumental buildings. The product does not form a film, thus avoiding detachment and flaking phenomena and, while ensuring excellent water repellency, ensures high values of permeability to water vapor thanks to its porous and microcrystalline structure, perfectly compatible with mortars, plasters and all other common elements of the body masonry. Physical-mechanical performance and durability are coupled with a vast choice of colors that cannot be altered over time; characteristics which, combined with the ease and practicality of application, make the product extremely versatile and adaptable to any project requirement. Restoring protective coatings based on stabilised potassium silicates, for vertical and horizontal surfaces. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Existing paints (washable, organic, solvent-based etc.) must be removed. Homogenise the surfaces by applying the fixative Sanaxil Fix. Spread SANAXIL in two coats: the first, for simple deposition, with steel trowel, the second, for spreading and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, under one of two suggested conditions: with dry trowel, for smooth surfaces; with moistened trowel, for antique-effect surfaces. Sanaxil I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours. Indicative consumption depending on the different particle sizes of Sanaxil I available: 1 mm GRAIN: approximately 1.25 -1.40 kg/m²; 1.2 mm GRAIN: approximately 1.40 -1.55 kg/m²; 2 mm GRAIN: approximately 1.85 -2.15 kg/m²; 2.2 mm GRAIN: approximately 2.00 -2.30 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 5 kg - Pail 25 kg

Sanaxil Fix Reinforcing, fixative, transparent primer, based on stabilised potassium silicate for the preliminary treatment of the surfaces to be painted and/or plastered with silicate-based, lime putty, systems, for ecological building interventions, new buildings and for the restoration of vintage buildings and monuments. Sanaxil Fix is a product consisting of potassium silicates. It is highly breathable and is not subject to thermoplastic effects. It does not contain resins, solvents, thinners and harmful or toxic emanations. Free of V.O.C. "Priming" fixative treatment of coatings, paints or putty coat based on lime putty, potassium silicate and siloxanes in general. Dust-proofing, reinforcing, cortical treatment for surfaces of pulverising plaster. Organic type paints (washable, solvent-based etc.) where present, must be thoroughly removed. The support should, in any case, be, clean, homogeneous, compact, dust-free. SANAXIL-FIX can be applied to substrates in masonry, on cement surfaces, lime-based surfaces, on well anchored mineral paints. They can be applied by brush, roller or spray: the number of coats required and the most appropriate dilution ratio with water will be determined as a function of the absorption conditions and degradation of the support. The admissible dilution range provides for additions of water up to a maximum ratio of 1:1. Apply from 0.10 to 0.15 litres of Sanaxil Fix per square metre of surface to be treated. Plastic can 5 l - Plastic can 20 l

Sanalink Hydraulic lime and natural light aggregate based fibre-reinforced mortar. It has high water vapor permeability characteristics, low bulk density (reduced thermal conductivity) and limited water permeability. Ideal for the construction of internal and external walls and masonry for new buildings, the renovation of existing buildings, green construction and the restoration of antique and monumental buildings. Sanalink has exceptionally strong water vapour permeability and adhesive properties and a particularly low elastic modulus. Its reduced bulk density makes it particularly advantageous in determining the thermal values ​​of the masonry, thanks to the thermal conductivity values, inferior to conventional cement mortars or lime based. It has physical, chemical and aesthetic properties very similar to antique mortars and is composed of raw materials of natural origin. The combined use of natural binders, micro-fibres and light inert pozzolanic materials guarantees high quality performance in terms of ductility, chemical resistance and water vapour permeability. It can be used for brickwork, tuff, stone and mixed masonry walls and is therefore recommended for the restoration of antique masonry, green construction and, in general, quality interior and exterior constructions. Mortar used for the construction and rehabilitation of interior and exterior masonry in solid or perforated concrete blocks, perforated bricks, solid bricks, tuff, natural stone and stone blocks in general. Application surfaces must be clean, free of dust, contamination, crumbling, inconsistencies, etc., and adequately saturated-surface-dry with water. Add approximately out 2/3 of the mixing water to the mixer and gradually add Sanalink and the rest of the water until a homogeneous, lump-free mixture of the desired consistency is obtained. The required mixing water is approximately 12-16% by weight (approximately 3.5 litres per 25 kg bag). Application can be manual (trowel) or mechanized (pumps, extruders, etc.). Approximately 17 kg/m² of Sanalink for every centimetre of thickness to be implemented (approximately 1700 kg per cubic metre). Bag 25 kg

Le gocce orali rappresentano una forma farmaceutica versatile e altamente assorbibile, ideale per chi cerca un dosaggio personalizzabile e un rapido assorbimento dei nutrienti. Questa tipologia di integratori è particolarmente adatta per chi ha difficoltà a deglutire le pillole, offrendo un'alternativa pratica e efficace. Le gocce sono prodotte in flaconi di diverse dimensioni, tra 5 e 30 ml, in materiale PET o vetro, garantendo una scelta flessibile del packaging. La produzione richiede un tempo di consegna di otto settimane, assicurando una disponibilità costante per i rivenditori. Le materie prime utilizzate includono estratti vegetali fluidi, fermenti lattici, lattoferrina e colostro, insieme a una varietà di aromi naturali e artificiali. Questo mix di ingredienti assicura che le gocce siano non solo efficaci, ma anche piacevoli da consumare. Gli integratori in forma di gocce sono ideali per chi cerca un prodotto che offra un dosaggio flessibile e un rapido assorbimento dei nutrienti.

Le gocce integratori alimentari sono una soluzione versatile e concentrata per chi desidera un'integrazione rapida e facile. Questi liquidi altamente concentrati possono essere aggiunti a bevande o cibi, rendendo l'assunzione dei nutrienti un processo semplice e discreto. Le gocce sono ideali per chi ha uno stile di vita frenetico e cerca un modo rapido per migliorare la propria salute.

Syntech Profix A two-component paste with a polyester resin base for the rapid realisation of structural fasteners and anchors for inserts and connectors in general. This quick-setting resin (which hardens in just 6 minutes at 20° C) facilitates the use of metal inserts a mere 2.5 hours from installation. Syntech Profix is a system that is easy and quick to use that provides high performance in terms of penetration, adherence and mechanical resistance. In particular, in concrete, natural stone, full and hollow brick works etc., the resin Syntech Profix, permeates the porous systems that delimit the perforation, allows the achievement of very high admissible loads, adjustable and scalable through variations of the fastening element, the anchor depth and so on. Syntech Profix is packaged in a two-compartment cartridge, whose special tip mixes the two components directly during extrusion, activating the polymerisation reaction instantly. Fixing of connectors, bars, plates, metallic structures, fencing, shutters, gates, shelves, reinforcing rods etc., in different types of media, with particular effectiveness in the presence of concrete, natural stone, bricks, drilled (through the perfo sleeves) etc. The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. The following accessories are provided for easy use of the cartridges Syntech Profix: - Gun for resins in a cartridge with rack-and-pinion piston. - Perfo sleeves (only for hollow masonry and perforated blocks) - Spout mixer for two-compartment cartridges (mixing tip) Extrude Syntech Profix in the required quantity in the fastening seat. Attach the metal insert to be anchored within a few seconds after the extrusion. Do not touch the insert for any reason until the ascertained hardening of the resin. Approximately 1.72 kg of Syntech Profix for each cubic decimetre of volume to be filled (variable according to the conditions of use). Bi-mix cartridge 400 cc - Box: 12 x (Bi-mix cartridge 400 cc).

Syntech Pavicrom A 2-component coloured finish, with an epoxy resin base in aqueous dispersion. Ideal for the pigmented coating of industrial flooring and concrete products in general. Surfaces treated with Syntech Pavicrom are easy to clean and provide excellent resistance to mechanical wear, as well as having a high resistance to water, alkaline solutions, detergents and hydrocarbons (oils, diesel, petrol, etc.). For protective and decorative painting of concrete floors, reviving the colour of old resin flooring, wall plinth enamelling, and so on. Perfect for mechanical workshops, manufacturing industries, warehouses and factories generally in which special and high chemical and mechanical resistance are required. The support on which the resin system is to be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilatations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. Apply by roller, brush or spray from 150 to 200 g / m2 of Syntech Primer EP-W to consolidate the substrate and facilitate the adhesion of the subsequent coating. Apply Syntech Pavicrom when the primer is completely dry and no later than 24 hours from the end of its application. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to apply in advance the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. Mix component A and component B separately, directly in their packages, in advance. When applying, combine the two components into a single container and thoroughly mix for 2 minutes using appropriate equipment (trolling motor). To prevent any errors in the mixing ratio that would result in a lack of or incomplete hardening, do not extract partial quantities from the packaging. Next, pour component B into the container of component A. Syntech Pavicrom is applied with a “short-pile” roller within 24 hours after applying the primer. Add the dilution water: the first coat diluted with water at a rate of 10 ÷ 20% depending on the porosity, cohesion of the support and the temperature; the second finish must be diluted by 6 ÷ 11%. After adding the dilution water, continue mixing for a few minute. We recommend applying two overlapping coats of the product, at temperatures not lower than +5° C. The second coat must be applied within 24 hours. 3-5% by weight of quartz B0 or B1 (or hollow glass microspheres) can also be added to achieve a non-slip effect. In two coats, apply 0.25 to 0.40 kilograms of Syntech Pavicrom per square metre of surface to be covered. Can 5 kg [A] - Can 2.5 kg [A] - Can 5 kg [B] - Can 2.5 kg [B] - Kit: 1 Can 5 kg [A] + 1 Can 5 kg [B] - Kit: 1 Can 2.5 kg [A] + 1 Can 2.5 kg [B]

Sanaxil P Breathable, natural, non-toxic paint, for external and internal surfaces, for adhesion and microcrystalline structure, based on stabilized potassium silicate. Mineral-based, active formulation, with high natural mildewcide and anti-condensation properties, prepared according to the traditional recipes, for use in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. Sanaxil P consists of potassium silicate and natural pigments. It has very high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances and toxic emissions in general, and does not have thermoplastic effects. Restoring and decorative paints for internal and external environments. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Pre-existing paints (washable, organic, solvent based etc. ) must be thoroughly removed. Preliminarily treat the support with the fixative Sanaxil Fix. Apply Sanaxil P, using a brush, roller or spray, in the number of coats required by the absorption condition of the support. Sanaxil P is "dust-free" (it has started to be consistent to the touch) after about 1 hour. It can be overcoated after 4-6 hours, while it will be dry in-depth after 10-16 hours. Sanaxil P can be used as such or diluted with Sanaxil Fix, at a rate of 15-20% by weight. Apply from 0.30 to 0.40 liters of Sanaxil P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Sanaxil I - Therm Smoothed mineral coating for interiors and exteriors with potassium silicates with chemical adhesion, anti-condensation, insulation, mould resistant, thanks to the addition of hollow glass spheres. Sanaxil I - Therm due to its mineral nature with chemical adhesion, revolutionizes the concept of adhesion to the support, penetrating deeply into the pores of the wall to then react with its components and form a unique and indissoluble "silicating" whole. With a final appearance similar to civil plaster. The product does not form a film thus avoiding detachment and peeling phenomena, it ensures a permeability to water vapour thanks to its microcrystalline structure of the same porosity as the wall while guaranteeing excellent water repellency. Elasticity and hardness are coupled in maximum degree with a wide choice of colours not alterable over time; characteristics that, combined with the ease and practicality of application, make the product extremely multi-functional, adaptable to any project requirement. Restoring protective coatings based on stabilised potassium silicates, for vertical and horizontal surfaces. All products in the Sanaxil I – THERM series cannot be attacked by mould. Recommended as a finish in "cladding" insulation systems, as it helps to increase the thermo-acoustic and anti-condensation coefficient. Stone, masonry, concrete and any type of plaster. The Sanaxil I - Therm system can be applied directly on surfaces treated with mineral paints or new surfaces. If there are residues of organic paint on the support (washable, solvent-based paints, etc.), before application it is necessary to remove them by stripping or sandblasting, and also never apply on plaster, under the beating sun, on warm or wet walls. During application, cover areas that are not to be painted such as jambs, doors, windows and floors because silicates attack glass, metals, ceramics, glazes, paint, marble and granite. Adverse climatic conditions can impose the realization of adequate protection during the application and drying phase of the coating. Never mix with other non-mineral based paints. NEW SUPPORTS Apply a coat of Protech Fix AC - Therm fixative diluted from 20 to 50% with water depending on the absorption of the support. OLD SUPPORTS On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with Protech Fix AC - Therm impregnating agent diluted 20 to 50% depending on the absorption of the support. The product is ready to use if necessary add a little water and stir slowly. Apply a coating layer with a stainless steel trowel with a thickness equal to that of the granules it contains. Pass again with a cutting spatula to remove any excess material. After light drying, pass over with a plastic trowel with rotary movements to compact, even out and achieve the full plaster effect. On large surfaces, it is recommended to apply the product of the same lot and proceed always wet on wet to avoid signs of resumption. Indicative consumption depending on the different particle sizes of Sanaxil I - Therm available: 1 mm GRAIN: approximately 1.6 -1.8 kg/m²; 1.2 mm GRAIN: approximately 1.8 -2.0 kg/m²; 2 mm GRAIN: approximately 2.4 -2.8 kg/m²; 2.2 mm GRAIN: approximately 2.6 -3.0 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 22 kg