Termékek poliimid (46)

Advanced plastics is our core. As a family-owned business, we enable modern life and deliver pioneering products and services worldwide across all industries.

3000M25/861N101/00 - Polyimide(PI) track-etched membrane filter Pore size: 0.10 µm | Pore density: 6.00 E+08 /cm² | Porosity: 4.7 % | Thickness: 25 µm multiangle pores | transparent PVP treated (hydrophilic)

In general, a Kapton film heater is always more expensive than a silicone heater or polyester heater. Where chemical resistance or the weight of the flexible heating element plays an important role, however, Kapton heaters are the ideal solution. The resistance of Kapton Polyimide to fungi, bacteria, ozone, weather, ageing and most chemicals, acids and solvents is very good, so that heating elements made of Polyimide (Kapton) are an ideal solution for many critical applications. Kapton foil heaters are also silicone-free and are characterised by an even heat distribution. The dielectric strength of a Polyimide film is very high and so the flexible Kapton (Polyimide) heater can be very thin. Due to the small thickness, the heat transfer to the component is improved and higher surface loads are possible. Typical applications for Kapton film heaters are: Laboratory technology, aircraft electronics, printers, diagnostic instruments, vacuum chambers, medical equipment and many more. Continuous temperature resistance:-40 °C - 200 °C Continuous temperature resistance with self adhesive foil:-40 °C - 180 °C Short term temperature resistance:200 °C Recommended max. watt density:0,8 W/cm² Power tolerance:+5 / -10% max. dimension:285 x 550 mm min. dimension:25 x 25 mm Min. height:0,2 mm Dimension tolerance:+/- 1 mm Quantities:from 1 piece min. bend radius:2 mm max. IP-protection:IP64 Adhesive foil possible:yes UL possible:no

Polyimidklebeband - Polyimidklebeband 7170 Artikelnummer:7170 Farbe:gold/gelb Klebstoff:Silicon Gesamtdicke:0,064 mm Foliendicke:0,025 mm Klebekraft:7 N/25 mm Temperaturbest.:kurzfristig bis 400 Grad Celsius dauernd 180 Grad Celsius Isolationsstufe H Länge:33 m Breite:ab 3 mm

TECASINT 6012 is an unfilled grade for direct forming parts with max. strength and elongation. Lowest modulus and thermal conductivity and optimum electrical properties.

Thermoforming Polyimide Film,Corona Resistance (CR) polyimide film,PI Film - Manufacturer of Polyimide Film in china. 1) HN Polyimide Film 2) FPC Polyimide Film 3) FEP(F46) Polyimide Film (FH/FHF) 4) Black Polyimide Film 5) ESD Polyimide Film 6) Aluminized Polyimide Film 7) Red,Green,Transparent Polyimide Film 8) Thermoforming Polyimide Film 9) Corona Resistance (CR) polyimide film 10) Thermal Conductive MT polyimide film Yancheng Tiandi Insulation Co.,Ltd Web: https://www.polyimide-pi.com/polyimide-film.htm Email: hsinsulation@aliyun.com hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

Thickness range: 12,5-125 µm high-temperature resistant Polyimide film partially high-temperature conductive Application: Automotive, Electrical Industry, Engineering Use e.g.: Kapton®, Upilex® Optics:brown/ golden-yellow, transparent

Propylene Glycol is most commonly used for the large-scale production of polymers. It is used as chemical raw material for the making of unsaturated polyester resins (UPR). It reacts with unsaturated maleic anhydride and isophthalic acid to form a copolymer. It is reacted with propylene oxide to make oligomers and polymers that are consumed for the production of widely used polyurethanes. It is useful in water-based acrylic architectural paints. It’s slow evaporation rate allows it to stop the surface from drying. It is approved for use indirectly as a food additive. It has the E-number E1520 for food applications. It is used in coffee-based drinks, liquid sweeteners, ice cream, and soda etc. It is widely used in cosmetics and pharmaceuticals. E490 is the number for cosmetic products and pharmacological products. It is applicable as a carrier or base for many types of makeup in the cosmetics industry. Acid Number:≤0.5mg KOH/L Water:≤0.5%

Unser Unternehmen bietet Ihnen ein breitgefächertes Repertoire an flexiblen Elektro-Isolierstoffen für den Elektromaschinen-, Transformatoren- und Generatorenbau an. Diese Produkte kommen außerdem in der Leuchten- und Lampenindustrie sowie in der Medizintechnik zum Einsatz.

Polyimid Fiber with PTFE Impregnation and Silicone Run-In Lubricant Practical useful application data: max. temperature: +180 °C High fatigue strength and flexibility Good acid resistance High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on...

ERGYTONYL est composé d’un trio de plantes toniques. L’éleuthérocoque contribue à une activité adaptogène et à optimiser les capacités mentales et physiques en cas de fatigue passagère. ; le ginseng soutient la vigilance et la mémoire, aide au maintien de bonnes performances cognitives et favorise la vitalité. Des oligoéléments dont le zinc, soutien de la fonction cognitive, et le magnésium, qui contribue à réduire la fatigue, complètent la formule. Quand est-il conseillé ? ERGYTONYL pourra être conseillé en cas de fatigue physique et/ou psychique, stress, surmenage ou lors de travail intense, période d’examens L'expertise Nutergia Sans alcool, sans édulcorant. La mer, une concentration de minéraux et d’oligoéléments. L’eau de mer exposée aux rayons solaires donne un concentré d’eau de mer. Désodé puis associé à un extrait français de lithothamne obtenu par un procédé exclusif au brevet déposé, et à des extraits de plantes et des oligoéléments spécifiques. Ginseng:1430 mg* Eleuthérocoque:1104 mg* Maté:552 mg* Magnésium:56 mg,15 % Zinc:3 mg,30 %

Kupferflach- und Runddraht, isoliert mit Polyimidfolie

Advanced plastics is our core. As a family-owned business, we enable modern life and deliver pioneering products and services worldwide across all industries.

Advanced plastics is our core. As a family-owned business, we enable modern life and deliver pioneering products and services worldwide across all industries.

Silicone heaters and Kapton heaters are preferred surface heating elements for laboratory equipment and medical technology due to their easy handling and variety of shapes. Like Kapton polyimide heating foils, silicone heaters are resistant to continuous temperatures of up to 200 °C, with self-adhesive foil up to 180 °C. When designing silicone heaters and Kapton foil heaters, the designer has almost unlimited degrees of freedom. This applies to the minimum and maximum dimensions, which are set within wide limits, as well as to contours and recesses, holes and feed-throughs of any kind. The good shape flexibility of silicone heating mats and foils as well as Kapton polyimide heaters also enables the heating of cylindrical, conical or rounded surfaces. The resistance of polyimides to fungi, bacteria, ozone, weather, ageing and most chemicals, acids and solvents is very good, making polyimide (Kapton) heaters an ideal solution for many critical applications. Continuous temperature resistance (with self-adhesive foil):200°C (180°C) Recommended max. watt density:0,8 W/cm² max. dimensions of silicone heating mats:940 x 3000 mm max. dimensions of Kapton/Polyimide film heaters:285 x 550 mm

We can offer flexible heating elements manufactured from three different insulation materials: silicone, polyimide (Kapton) or polyester. Each of these materials possess different properties which make them suitable for diverse applications. Silicone heaters can also be produced in very large sizes, whereas polyimide is significantly thinner and polyester unbeatable in price when it comes to high quantities. All three of them are bespoke products made according to your needs, so within the bounds of what is technically feasible you as the customer can determine almost every feature of your heater. This can include; voltage, wattage, dimensions, shape, sensors, leads, plus much more. Due to their low thermal mass flexible polymer insulated heaters distinguish themselves by a very short response time and excellent controllability. Insulation materials:Silicone, Polyimide (Kapton), Polyester Continuous temperature resistance (with self adhesive foil):Silicone & Kapton: 200°C (180°C), Polyester: 90°C

Starting with the base polymer TECASINT 1011, TECASINT 1031 has been developed. This material contains 40% graphite, unlike the starting material. TECASINT 1031 has a very high resistance to thermal ageing and improved self lubrication. Its other properties include minimised thermal elongation for dimensionally stable components and increased creep strength.

TECASINT 6062 is a highly filled grade for direct forming parts with low static friction. For lubricated and unlubricated tribological applications

Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The material is self lubricating, which means it also has good properties in dry running conditions. TECASINT 1061 is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, in a vacuum or in inert gases (techn. dry). The plastic displays low outgassing in accordance with ESA regulation ECSS Q 70 20.

Starting with the base polymer TECASINT 5011, TECASINT 5051 with 30 % glass fibre has been developed. This material is characterised by reduced thermal elongation, reduced moisture absorption and high wear strength during chip test applications in the semiconductor industry. It has good electrical insulation properties and surface hardness, and also high rigidity. The glass transition temperature is 340°C, while the maximum service temperature may be – for a short time – up to 300 °C.

polyimide tubing,polyimide flexible heaters,similar kapton flexible heaters - Polyimide Tubing Polyimide Tubing / Polyimide Film Spiral Wrapping Tubing has good mechanical and useful performance at low and high temperature, can keep the dielectric strength and size stablity at low and high temperature environment. It suitable for F, H Level application and -35~180 degree high temperature environment. Inner Diameter: 0.016-- 2.000 inch; Wall Thickness: 0.001 --0.008 inch; Density: 1.41 g/cc Application: 1Polyimide tube with 400 degree high temprature 2.resistance high temperature 3, space technology, F,H level electric machine, electrical insulation, PTC heater, heat protector Battery splice. 4, FPC (Flexible printing circuit board), PTC electrothermal film, TAB (Pressure sensitive adhesive tape base materials), spaceflight, aviation. Yancheng Tiandi Insulation Co.,Ltd Web: https://www.polyimide-pi.com/polyimide-tape.htm Email: hsinsulation@aliyun.com hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation.

Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low coefficient of friction. Owing to its self lubricating property, TECASINT 2061 is very good for dry application. The material is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has the maximum strength and elongation, together with a high modulus of elasticity and minimal thermal and electrical conductivity. TECASINT 2011 is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

TECASINT 6032 is a highly filled grade for direct forming parts with low coefficient of thermal expansion and high creep resistance.

Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis a vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

TECASINT 8061 has been made from PTFE with a modification of 40 % PI. Compared with TECASINT 8001 it has a lower creep tendency under load, along with outstanding sliding and friction properties. The material is ideally suited to soft mating materials e.g. stainless steel, brass, aluminium or bronze.

Polyimide Resin Polyimide Resin Powder are known for thermal stability, good chemical resistance, excellent mechanical properties, and characteristic orange/yellow etc color.Thermoset polymer matrix polyimides exhibit very low creep and high tensile strength. These properties are maintained during continuous use to temperatures of up to 360 °C. Composite Polyimide Resin Powder (PTFE composite wholly aromatic polyimide resin powder) It is used for compounding with polytetrafluoroethylene (PTFE). Generally, the addition amount is 5%-15%, which can greatly improve the wear resistance of PTFE and slightly improve the heat resistance of PTFE.Characteristics: High temperature resistance, self lubrication, friction resistance, easy processing. Application: Bearing, shaft, bearing, seal gasket, etc. Yancheng Tiandi Insulation Co.,Ltd web :https://www.polyimide-pi.com/polyimide-powder-varnish.htm mail: hsinsulation@aliyun.com hsinsulation@hotmail.

TECASINT 5501 ESD light-brown is an electrically modified polyimide based on the further development of TECASINT 5111. By modifying it with special additives, the PI plastic has a static dissipative effect and thus achieves a surface resistance of 10 E6-10 E8 Ohm. The ESD material is therefore ideally suited for applications where electrostatic dissipation is to be ensured. Like all polyimide resins, TECASINT 5501 ESD light-brown is highly resistant to thermal and mechanical stress. The glass transition temperature is 329 °C and the short-term service temperature is 300 °C. In addition, the PI material is characterised by its high creep resistance. The PI Polyimide also offers a very low thermal expansion of 2.6 10-5 K-1, a high surface hardness and very good stiffness values. This makes TECASINT 5501 ESD light-brown suitable for applications in the semiconductor industry, electronics industry, cryogenics or in nuclear and vacuum technology.