Termékek potesium (44)

Our potassium bolus Kalitop is a fast-acting cattle supplement that is developed to prevent and treat hypokalemia in cattle (a shortage of potassium). Hypokalemia in cattle mainly occurs in lactating animals already suffering from conditions such as anorexia, displaced abomasum, clinical mastitis, retained placenta, and heat stress.

DERIVADOS DEL FLUOR is a global leader in the supply of hydrofluoric acid and a wide range of inorganic fluorides, including potassium fluoroborate. Our KBF₄ supply principles focus on safety, service, quality, and adaptation to our customers´ needs: We supply potassium fluoroborate in standard packaging and other specialised containers adapted to our customers´ needs. Close cooperation with our clients enables DDF to supply a high-quality product that meets the highest standards. Our robust inventory, together with our integrated logistics service enables us to provide international just-in-time delivery to all our customers. Chemical Formula:KBF4 Description:Free Flowing white product Identification CAS No:14075-53-7 Concentration:> 98% KBF4 Packaging:25 kg Bag and Big-Bags Transport:Classified as a non-dangerous good

Dr. Paul Lohmann® offers Dipotassium Oxalate 1-hydrate as fine powder and as crystals in chem. pure. In the oral care sector, it is used for pain desensitization. For industrial applications, it is used as a potassium source for plasma welding electrodes, complexing and precipitating agents for metals and for the preparation and modification of catalyst surfaces. CAS 6487-48-5 EINECS 209-506-8 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Potassium borohydride belongs to the group of complex salts. The Intermediate is used in the Agro, Electronics, Fine Chemicals, Pharma, Pulp & Paper industry. Name:Potassium Borohydride Synonym:Potassium tetrahydridoborate Synonym 2:KBH4 CAS Number:13762-51-1 Industry:Agro, Electronics, Fine Chemicals Industry 2:Pharma, Pulp & Paper

Dr. Paul Lohmann® offers Potassium Acetate as powder, fine granules and granules in food/pharma/chem. pure grade. For pharmaceutical applications, it is used for parenteral nutrition. For biopharmaceutical applications, it is used as pH buffer in purification processes. For food applications, it is used as acid regulator. For industrial applications, it is used as an isomerization catalyst for the production of rigid polyurethane foams. Specific fire extinguishing agents and the modification of catalysts are further areas of application. CAS 127-08-2 EINECS 204-822-2 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Sanaxil I Natural, protective, decorative, breathable, pigmented, non-toxic, anti-mold plaster, with stabilized potassium silicates, for interiors and exteriors. Substantially mineral formulation which, thanks to the natural alkaline pH of potassium silicate, develops a strong antibacterial and anti-mold action. Sanaxil I is a versatile and valid product in various application fields: in green building interventions, in new constructions and in the restoration of period and monumental buildings. The product does not form a film, thus avoiding detachment and flaking phenomena and, while ensuring excellent water repellency, ensures high values of permeability to water vapor thanks to its porous and microcrystalline structure, perfectly compatible with mortars, plasters and all other common elements of the body masonry. Physical-mechanical performance and durability are coupled with a vast choice of colors that cannot be altered over time; characteristics which, combined with the ease and practicality of application, make the product extremely versatile and adaptable to any project requirement. Restoring protective coatings based on stabilised potassium silicates, for vertical and horizontal surfaces. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Existing paints (washable, organic, solvent-based etc.) must be removed. Homogenise the surfaces by applying the fixative Sanaxil Fix. Spread SANAXIL in two coats: the first, for simple deposition, with steel trowel, the second, for spreading and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, under one of two suggested conditions: with dry trowel, for smooth surfaces; with moistened trowel, for antique-effect surfaces. Sanaxil I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours. Indicative consumption depending on the different particle sizes of Sanaxil I available: 1 mm GRAIN: approximately 1.25 -1.40 kg/m²; 1.2 mm GRAIN: approximately 1.40 -1.55 kg/m²; 2 mm GRAIN: approximately 1.85 -2.15 kg/m²; 2.2 mm GRAIN: approximately 2.00 -2.30 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 5 kg - Pail 25 kg

Sanaxil I - Therm Smoothed mineral coating for interiors and exteriors with potassium silicates with chemical adhesion, anti-condensation, insulation, mould resistant, thanks to the addition of hollow glass spheres. Sanaxil I - Therm due to its mineral nature with chemical adhesion, revolutionizes the concept of adhesion to the support, penetrating deeply into the pores of the wall to then react with its components and form a unique and indissoluble "silicating" whole. With a final appearance similar to civil plaster. The product does not form a film thus avoiding detachment and peeling phenomena, it ensures a permeability to water vapour thanks to its microcrystalline structure of the same porosity as the wall while guaranteeing excellent water repellency. Elasticity and hardness are coupled in maximum degree with a wide choice of colours not alterable over time; characteristics that, combined with the ease and practicality of application, make the product extremely multi-functional, adaptable to any project requirement. Restoring protective coatings based on stabilised potassium silicates, for vertical and horizontal surfaces. All products in the Sanaxil I – THERM series cannot be attacked by mould. Recommended as a finish in "cladding" insulation systems, as it helps to increase the thermo-acoustic and anti-condensation coefficient. Stone, masonry, concrete and any type of plaster. The Sanaxil I - Therm system can be applied directly on surfaces treated with mineral paints or new surfaces. If there are residues of organic paint on the support (washable, solvent-based paints, etc.), before application it is necessary to remove them by stripping or sandblasting, and also never apply on plaster, under the beating sun, on warm or wet walls. During application, cover areas that are not to be painted such as jambs, doors, windows and floors because silicates attack glass, metals, ceramics, glazes, paint, marble and granite. Adverse climatic conditions can impose the realization of adequate protection during the application and drying phase of the coating. Never mix with other non-mineral based paints. NEW SUPPORTS Apply a coat of Protech Fix AC - Therm fixative diluted from 20 to 50% with water depending on the absorption of the support. OLD SUPPORTS On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with Protech Fix AC - Therm impregnating agent diluted 20 to 50% depending on the absorption of the support. The product is ready to use if necessary add a little water and stir slowly. Apply a coating layer with a stainless steel trowel with a thickness equal to that of the granules it contains. Pass again with a cutting spatula to remove any excess material. After light drying, pass over with a plastic trowel with rotary movements to compact, even out and achieve the full plaster effect. On large surfaces, it is recommended to apply the product of the same lot and proceed always wet on wet to avoid signs of resumption. Indicative consumption depending on the different particle sizes of Sanaxil I - Therm available: 1 mm GRAIN: approximately 1.6 -1.8 kg/m²; 1.2 mm GRAIN: approximately 1.8 -2.0 kg/m²; 2 mm GRAIN: approximately 2.4 -2.8 kg/m²; 2.2 mm GRAIN: approximately 2.6 -3.0 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 22 kg

Sanaxil Filler Anti-crackling base, based on siliceous aggregates of different particle sizes, potassium silicate, nylon microfibre and specific agents, in a special mix ensuring watertightness, water-repellence, permeability to steam. Available in two different particle sizes, on request. Specific for the reclamation of internal and external vertical surfaces, characterised by significant presence of cracklings from shrinkage (also of width up to 1 mm), for homogenising regularisation in general. It can also be used as a base to obtain a rustic effect of the finish. Particularly suitable for the anti-cracking reclamation of historic buildings. Due to its mineral nature and the chemical adhesion it provides, Sanaxil Filler represents a significant revolution in the traditional concepts of adhesion to supports: it penetrates deeply into the pores, it reacts with the components of the masonry structure creating a homogeneous, indissoluble and breathable "silicated" whole; it does not form films, it is water repellent and resistant to moulds and micro-organisms. When it is applied in combination with paints or putty coats, it substantially improves their durability, because it gives a greater thickness to coatings and paints. Sanaxil Filler is composed of stabilised potassium silicate, silica aggregates and natural pigments. It has high breathability, excellent mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Subbase micro-smoothing, for subsequent coatings with paint or with putty coat, specific for the anti-crackling reclamation of large vertical surfaces of buildings and condominiums in general. It creates of a thick base to improve the durability of the coating. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". It is recommended that you preliminarily treat the media with the specific fixative Sanaxil Fix (as such, or diluted with water up to a ratio 1:1). Sanaxil Filler should only be used for reclamation and under the conditions described above. It can be applied with a roller or brush, possibly after dilution with 10-15% Sanaxil Fix. Apply from 0.30 to 0.50 kg of Sanaxil Filler per square metre of surface to be treated. Pail 25 kg - Pail 5 kg

Dr. Paul Lohmann® bietet Zinkpyrophosphat als Pulver, feines Pulver in chem. rein an. Im industriellen Bereich wird es als "weisser" Feststoffschmierstoff eingesetzt. CAS 7446-26-6 (w.frei) EINECS 231-203-4 Dr. Paul Lohmann® führt Produkt- und Anwendungsentwicklung in enger Zusammenarbeit mit den Kunden durch. Dazu gehört die Anpassung chemischer und physikalischer Parameter wie Schüttdichte, Benetzbarkeit, Partikelgröße, Reinheit oder pH-Wert.

Resco launches it's newest bolus Kalitop. One application provides 70 grams of potassium to prevent or cure hypokalemia.

Kaliumnitrat min 99,5 % technisch der Firma Cofermin Chemicals GmbH & Co. KG, Essen. Prompte Lieferung ab Deutschland; mit oder ohne Antibackmittel; andere Qualitäten auf Anfrage. Säcke zu 25 kg netto oder big bags zu 1.000 kg netto, jeweils auf Paletten zu 1.000 kg netto. Abgabe nur an gewerbliche Abnehmer in Großhandelsmengen. Kein Verkauf an private Endverbraucher!

Titandioxide der Cofermin Chemicals, Essen, Deutschland in diversen Qualitäten (Anatas und Rutil) Herkunft:Deutschland

Potassium Nitrate min 99,5 % of Cofermin Chemicals, Germany. With or without anti caking agent (ACA). Prompt delivery from Germany in 25 kg bags or big bags, both on pallets. No sale to private consumers! Delivery only to commercial customers in wholesale quantities.

Erogatore con estinguente non pressurizzato ad aerosol di sali di potassio, per la protezione contro il fuoco e gli incendi di ambienti, archivi, archivi storici, biblioteche, biblioteche storiche, CED, depositi, sottopavimenti, controsoffitti. depositi cartacei. Certificato secondo la norma EN15276:2019