Termékek pp ediment szűrő anyag 5 mikron (12)

Propylen, Herstellung von Plastiktischen, -stühlen, Herstellung von Plastikküchengeschirr, Ringherstellung, Automobilindustrie, Herstellung von Plastikkoffern, Bauindustrie (Isolierung, Häkeln, Matten, konische Füße usw.), Eimer, Es wird in Blumentöpfen und verschiedenen Bereichen der Spielzeugindustrie verwendet. Monomer von Propylen Polypropylen wird durch Polymerisation chemischer Lösungsmittel gewonnen. Es ist extrem beständig gegen (Säuren und Basen). Wir haben natürliche, milchweiße und farbige Sorten im Angebot. Die Färbung erfolgt auf Anfrage.

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

COMPOSITION ET ASPECT Enduit en poudre à base de plâtre, carbonate de calcium, résine et divers adjuvants. La pâte obtenue est de couleur blanche. SUPPORTS ADMIS • Béton • Agglos • Enduit ciment • Béton cellulaire DOCUMENTS À CONSULTER DTU 25.41 et 25.42. Norme NF EN 14496. Marquage CE. CARACT ÉRISTIQUES TECHNIQUES • Temps de prise: 2 heures. • Réaction au feu A1. CONDITIONNEMENTS Sac de 25 kg sur palette houssée. Sac de 5 kg. PRÉPARATION DES SUPPORTS La surface du mur doit être saine, exempte de poussière, d'huile et ne pas ressuer l'humidité. En été, si les supports sont trop secs, il convient de les humidifier légèrement. TAUX DE GÂCHAGE 12,5 litres d'eau par sac de 25 kg. APPLICATION La pose se fait généralement par plots de 10 cm de diamètre environ, espacés de 30 cm horizontalement et de 40 cm verticalement sur la plaque de plâtre ou l'isolant. CONSOMMATION De 1,5 à 3 kg/m² en fonction du nombre et de l'épaisseur des plots. TEMPS DE SÉCHAGE ISOCOL EXPERT...

Le magnésium est l'un des biopierwiastes les plus précieux. Il joue de nombreux rôles importants dans le corps: il participe à des réactions biochimiques importantes, est crucial pour le fonctionnement efficace du nerveux, du sang, du digestif, des os, des os, de l'hyperactivité sanguine ou de la formation de calculs rénaux, ralentit le processus de vieillissement , renforce l'immunité du corps. Le magnésium est un élément commun, mais mal digestible. Il est absorbé que de 15 à 40% des aliments, des céréales, des produits de céréales, des céréales, du riz brun, des fruits secs, des légumes à feuilles verts frais et du chocolat sont quelques-uns des aliments riches en magnésium. Pour ceux dont le régime alimentaire n'est pas riche en produits mentionnés, une supplémentation peut être nécessaire. Comment compléter la carence en magnésium? Vous pouvez obtenir des suppléments de magnésium sous forme de comprimés ou de capsules ou compléter cet élément à travers la peau.

Nº Permis de Commerce Paralelle: 2200593 Composition: Soufre : 800 g/L

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg

DÉFINITION TECHNIQUE Colle mastic acrylique en dispersion aqueuse, prête à l’emploi, pour revêtements muraux isolants et éléments décoratifs. COMPOSITION ET ASPECT Résine acrylique en émulsion, agent tackifiant, épaississant et divers adjuvants. La pâte est de couleur blanc cassé. SUPPORTS ADMIS • Murs et plafonds en intérieur • Béton • Enduit ciment • Plaques de plâtre • Carreaux de plâtre • Ancienne peinture • Sous-couche d’impression CARACTÉRISTIQUES TECHNIQUES • Temps de gommage : 5 mn • Temps ouvert : 20 minutes • Temps de prise : 24 à 48 heures • Densité : environ 1,4 • Extrait sec : 75% REVÊTEMENTS • Polystyrène expansé ou extrudé (panneaux, dalles, plaques, etc...) • Éléments décoratifs en polystyrène ou polyuréthane : rosaces, corniches, moulures, etc • ”Aluminium - polystyrène” (collage face aluminium) • Liège • Isolants (Dépron...) CONDITIONNEMENTS Seaux de 1,5 et 7 kg sur palette houssée. STOCKAGE 6 mois à l’abri du froid et des fortes chaleurs en...

Magnez to jeden z najcenniejszych biopierwiastków. Odgrywa wiele ważnych ról w organizmie: uczestniczy w ważnych reakcjach biochemicznych, jest kluczowy do sprawnego funkcjonowania układu nerwowego, krwionośnego, trawiennego, kostnego, przeciwdziała nadkrzepliwości krwi, czy tworzeniu się kamieni nerkowych, spowalnia procesy starzenia się, wzmacnia odporność organizmu.Magnez jest pierwiastkiem powszechnym, lecz słabo przyswajalnym. Z pokarmów wchłania się go zaledwie 15-40%.Orzechy, ziarna, produkty zbożowe, kasze, brązowy ryż, suszone owoce, świeże zielone warzywa liściaste i czekolada to niektóre z pokarmów bogatych w magnez. Dla tych, których dieta nie jest bogate w wymienione produkty suplementacja może okazać się niezbędna.Jak uzupełnić niedobór magnezu? Można zaopatrzyć się w suplementy magnezu w formie tabletek czy kapsułek lub suplementować ten pierwiastek przez skórę. Według niektórych naukowców ta metoda zapewnia najlepszą przyswajalność.

El magnesio es uno de los biopierwiast más valiosos. Desempeña muchos roles importantes en el cuerpo: participa en importantes reacciones bioquímicas, es crucial para el funcionamiento eficiente del nervioso, la sangre, la digestiva, el hueso, el hueso, previene la hiperactividad sanguínea o la formación de cálculos renales, ralentiza el proceso de envejecimiento , fortalece la inmunidad del cuerpo. El magnesio es un elemento común, pero mal digerible. Se absorbe de solo el 15-40%de los alimentos, granos, productos de cereales, cereales, arroz integral, fruta seca, verduras de hoja verde fresca y chocolate son algunos de los alimentos ricos en magnesio. Para aquellos cuya dieta no es rica en productos mencionados, puede ser necesaria la suplementación. ¿Cómo complementar la deficiencia de magnesio? Puede obtener suplementos de magnesio en forma de tabletas o cápsulas o complementar este elemento a través de la piel. Según algunos científicos, este método proporciona la mejor absorción.

TECHNICAL DEFINITION Multi-purpose filler for interior use. • Filling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates: plaster, plasterboards, plaster blocks, concrete, cement rendering,concrete blocks, aerated concrete, brick, earthenware, TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard NFT 30 608 • pH : neutral • Setting starts after 50 minutes • Setting ends in 1 hr 10 min • Bending : 3 N/mm2 • Compression : 7 N/mm 12 kg buckets on wrapped pallet. STORAGE 9 months in original unopened packing protected from damp. THE TEMPERATURE DURING APPLICATION AND DRYING MUST BE SUPERIOR TO 5°C. DO NOT USE ON A DAMP SUBSTRATE. DO NOT USE ONCE THE PASTE HAS STARTED TO SET.

Engrais organique et organomineral provenant des engrais minéraux avec fumier des brebis, exempt de mauvaises herbes et d’agent pathogènes. Formulation presentée sous forme granulée. Composition : Azote total (N) : 6 % Anhydride phosphorique (P2O 5) : dix % Oxyde de potassium (K2O) : 20 % Soufre (S) : 5,9 % Magnésium (Mg) : 3% Fer (Fe) : 0,1% Matière organique totale : 15 % Extrait humique : 8 %