Termékek pvd bevont fém (9)

Syntech Poliurea Top Coating A protective, pigmented, two-component formulation based on aliphatic polyurethane resins, ideal as a protective and aesthetic coating on waterproofing with SYNTECH POLIUREA SPRAY. Characterised by high levels of elasticity and elevated protection, even in aggressive atmospheres. Available on request in shades from the RAL colour range. Surface coating pigmented for colouring polyurethane claddings, and their protection from UV rays (which in the absence of the top coating would alter the colour over time). After suitable priming with SYNTECH POLYUREA PRIMER, it can also be applied as a simple coloured aliphatic protective coating. Polyurea support Vacuum and blow the surfaces to eliminate any dust that may have accumulated in the 24-48 hours following the installation of SYNTECH POLIUREA SPRAY Support in concrete, mortar, brick, tiles The support on which the polyurea system must be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to apply in advance the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. It is recommended to use Primer from the SYNTECH POLIUREA PRIMER range. On particularly absorbent substrates, to avoid the formation of craters / blowholes on the surface of the freshly sprayed product, it is recommended to use primers from the SYNTECH POLIUREA PRIMER range, always contacting the Azichem technical staff for clarification on the most suitable type to use. Apply several layers of primer until the porosity is saturated and providing a light dusting with clean and dry quartz sand (0.4-0.7 mm). Never dust off the primer. Provide suitable elastic sealing systems to cover joints, fittings, cracks or fissures subject to significant movements. Pour component B with component A into a single container, taking care to remove all the material from the packaging. Mix thoroughly with a mixer at low revs, until a lump-free mixture is obtained. Apply with a roller or brush on the surfaces of SYNTECH POLYUREA SPRAY, within 24-48 hours of spreading the latter. A thorough sanding of the supports is recommended for any repairs and/or finishes. From 0.15 to 0.25 kg of SYNTYECH POLIUREA TOP COATING for each square metre of surface to be covered. Can 6.7 kg [A] - Can 3.3 kg [B] - Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B]

Standard Harzfolie schwarz für Folienetiketten, Extrem kratzfest, wischfest und resistent gegen Lösemittel Breite 110 mm Lauflänge 74 m Ø Hülse 12,7 mm Breite Hülse: 110 mm Material: Harz Farbe: schwarz Dieses Farbband ist für Drucker mit einer Druckbreite von ca 110 mm Artikelnummer: 2306055 Folienbreite: 110mm Rollenkern: 12mm Lauflänge: 74m

Nos films polyéthylène de protection sont largement utilisés dans le domaine de la construction. Voici nos quelques références : Films PE 45/50µm pour protection économique et légère Films PE 70 et 100µm pour de la protection de sol économique et résistante Films PE 150µm sous dallage noir anti-UV 12mois Films PE 150µm quadrillé Films PE 200µm Blanc pour créer des confinements sécurisés Films PE 100 et 200µm classés feu M1 pour hôpitaux et autres ERP Films PE 300µm sous dallage Films PE 300µm anti-radon

Référence COLLEFIBRE-5KG

MFI (g/10 min (230°C/2.16 kg) -2,5- 3,5 Produktform: Granulat 2-5mm Verpackung: Sack 25 kg Preis:0,85/kg Nur 5t. Lager: 42555 Velbert Deutschland

1-komponentiger Kleb-und Dichtstoff auf Basis von MS-Polymer Verbrauch ca. bei 5 mm x 5 mm Fugen 12-14 Laufmeter pro Kartusche (290 ml).

Application Widely used weather and cold resistant industrial rubber grade with good mechanical properties and chemical resistance. Suitable for open air and good ozone resistance. Material:EPDM/SBR Color:Black Hardness:70° +/- 5° Shore A Temperature range:-30 °C +90 °C Plate size:1400 x 10000 mm Thickness in mm:1 mm to 50 mm

Référence APPRET-5KG

Référence GCNOIRPIS-25KG