Outdoor decorative wood-burning fireplace made of high-strength quartz glass, withstanding heat up to 1300 degrees. Stainless steel base and cover are included into the scope of supply.
Material:Heat-proof quartz
Outer surface:Matt
Inner surface :Smooth
Maximum heating temperature :1300⁰C
Style:Minimalism, High-Tech
Size:D 610 mm / H 540 mm
Weight:30 kg
Photoluminescent light-accumulating opaque film FES-24.
Light yellow, cadmium-free, special film with a matte surface in accordance with TU 22.21.30-001-13006553-2020. The number of charge and discharge cycles of phosphors is not limited within 7 years.
This film is intended for direct printing, cutting into ribbons, sheets.
It is produced in rolls of 50 meters long and 0.61 meters wide.
Released in rolls, in one roll not less than 30.5 sq.m.
Suitable for the production of evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers, FES line marking tapes.
Dimensions:in rolls 50 m, width 0.61 m
Sheets made of photoluminescent light-accumulating film FES-24.
The size of one sheet of A3 format (305 by 410 mm).
Suitable for making evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers.
Total thickness:0.35 mm
Thickness without supporting plate:0.185 mm (Without back paper)
Flammability group:Г2 (moderately flammable)
Inflammability group:B2 (moderately inflammable)
Smoke generation coefficient:Д2 (moderate smoke generation capacity)
Toxicity index:T2 (moderate hazards)
Flame propagation group:РП2 (weakly propagating)
Oxygen index:24.5%
Shape stability:max 0.3 mm shrinkage when pasting on steel
Tensile break elongation:150% in the transverse and longitudinal direction
Thermal stability:When applied to aluminum, -40°C to +100°C, unchanged
Tensile strength:min 12 MPa in the transverse and longitudinal direction
Adherence temperature:at least +5°C
Shelf life:at least 5 years
The service life:at least 7 years
Transparent photoluminescent light-accumulating film FES-24P.
Three-layer light yellow, cadmium-free, special polyvinyl chloride film with a glossy surface in accordance with TU 22.21.30-001-13006553-2020. The number of charge and discharge cycles of phosphors is not limited within 7 years.
This film is intended for application over the finished product (lamination).
It is produced in rolls of 50 meters long and 0.61 meters wide.
One roll contains at least 30.5 square meters.
Suitable for the production of evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers, line marking tapes.
Dimensions:in rolls 50 m, width 0.61 m
Sheets made of photoluminescent light-accumulating film FES-24.
Size of one sheet of A2 610 by 410 mm Suitable for making evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers.
Total thickness:0.35 mm
Thickness without supporting plate:0.185 mm (Without back paper)
Flammability group:Г2 (moderately flammable)
Inflammability group:B2 (moderately inflammable)
Smoke generation coefficient:Д2 (moderate smoke generation capacity)
Toxicity index:T2 (moderate hazards)
Flame propagation group:РП2 (weakly propagating)
Oxygen index:24.5%
Shape stability:max 0.3 mm shrinkage when pasting on steel
Tensile break elongation:150% in the transverse and longitudinal direction
Thermal stability:When applied to aluminum, -40°C to +100°C, unchanged
Tensile strength:min 12 MPa in the transverse and longitudinal direction
Adherence temperature:at least +5°C
Shelf life:at least 5 years
The service life:at least 7 years