Bond Plus
Adhesive latex based on elastomeric styrene-butadiene rubber and alkaline silicate in aqueous dispersion, flexibilising, reactive, for adhesive grout and to improve adhesion, the behaviour and performance of mortars and plasters.
Production of adhesive, deformable, high-protective and waterproofing performance mortars and plasters for civil, hydraulic, industrial works, in urban, marine and mountain atmospheres. Preparation of hydrating solutions to improve the adhesion and performance of premixed mortars and plasters; preparation of adhesive grouts for non-structural construction joints. Anti-dust treatments, reinforcing concrete surfaces.
Shake Bond Plus thoroughly in the tank, and dilute it with water as required. Add the prepared solution to the cement (or lime) and aggregates mixture, in the most suitable dosages for this application, as specified below.
It is always essential to carry out preliminary tests for an accurate definition of the mixtures to use, and to check the suitability of the product on the basis of the specific requirements.
Refer to the table shown in the product datasheet.
Packaging: 25 kg can
UM: €/kg
Cortec VpCI® 380 Railcar Coating.
Protect your railcars with Cortec VpCI® 380, a cutting-edge, water-based acrylic coating.This innovative solution offers superior corrosion protection, directly applied to metal without primer.
Enjoy long-lasting durability against harsh weather, easy application, and an attractive finish.Ideal for railcars, trucks, and more.
Protects ferrous and non-ferrous metals.Maintain your fleet's value with Cortec VpCI® 380.
PIR insulation board with aluminum coating. Lambda = 0,022 W/mK.
Lambda:0,022 W/mK
Dimmensions:1200x2400 mm or 1200x600 mm
Thickness:from 20 to 250 mm
Fire reaction :E
Compressive stress:≥ 120 kPa
Joint types:FIT - flat cutter, TAG - Tongue-groove cutter
Colle de contact transparente à base polyuréthane - spécial PVC doux
Pour double encollage de matériaux divers, durs ou flexibles, comme la plupart des matières synthétiques (PVC souple,
PVC, ABS, plexi, polycarbonate), bois, panneaux de revêtements décoratifs stratifiés, placage
et collage sur champ, nez de marches et marches d’escalier, plinthes en PVC, cuir, liège, textile,
métaux entre eux ou sur bois, pierre, béton, plâtre, métal et autres supports lisses et non poreux.
Spécifiquement pour des applications dont la couche de colle ou le joint de colle reste visible : comme le collage sur
verre ou plexi.
Aussi idéal pour la réparation de bâches, toiles de tente et pour matériaux gonflables en PVC souple.
Prête à l'emploi, transparente au séchage, pas de trace brune, utilisation aisée à la brosse et au peigne à colle,
force d'adhérence progressive rapide, résistante à l'humidité à la chaleur et au froid (-10°C jusqu'à +70°C)
Résiste aux acides légers et bases
Sans...
ECOFIX PLUS the best adhesive spray for printing boards
ECOFIX PLUS is an high tack adhesive specially indicated for the textile silk-screen printing industry.
It is suitable to keep the fabrics steady to their support while being printed.
CHEMICAL BASE
BASE: Synthetic rubbers and solid resins
SOLVENTS: hydrocarbure group, benzen and omologous are absent
PROPELLENT: Denaturate odourless hydrocarbure
COLOUR: Yellow clear
VISCOSITY: Middle
IT DOES NOT CONTAINS CFC
MAIN CHARACTERISTICS
It does not transfer on the fabric or cloths printed.
It does not dirty the fabrics.
It is suitable for cotton, silk, wool, synthetic fabrics, cotton, mixed.
It resists to many applications.
It has a good resistance to heat.
It is also suitable in embroidery industry to keep the cloth steady during embroidery.
In the cut rooms it gets the adhesion of the model to the cloth during the cut.
DIRECTIONS FOR USE
Shake well the can before use.
Spray the product from a distance of 25-30 cm.
Remove it with wash solvent perchloroethylene.